Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Scattering mechanism and reduction of insertion losses in a laminated polarization splitter

We experimentally found the unexpected phenomena of scattering in laminated polarization splitters (LPS's) composed of a-Si:H-SiO(2) multilayer and studied its mechanism. The scattering phenomena strongly depend on the incident angle and polarization of the incident light. To reduce the scattering loss in LPS's, a multilayer with flat layer boundaries is fabricated with rf bias sputtering. As a result, the insertion loss of the LPS is reduced to ~ 1 × 10(-3) dB/ μm, which is acceptable for practical uses.     

A study on improving shielding performance of shielded cable

With the developments in power electronics equipment, the electromagnetic environment has become severe for electronic equipment. In the smart facility field, the stable operation of electronic devices is indispensable, and noise countermeasures must be improved. To suppress intrusive noise from cables, shielded cables are used in many cases. However, electromagnetic induction cannot be suppressed when the shield is grounded at one end, and when grounding both ends of the shield, current flows through the shield creating intrusive noise in the cable. That is, even if a shielded cable is used, a sufficient effect cannot be obtained. Therefore, as a countermeasure, this study prototypes and evaluates cables that combine double shielded cables with magnetic cores. Evaluations conducted using the copper pipe method, triaxial method, and impulse test confirm that the shielded performance improved by 10–30 dB compared with the conventional shielded cable.     

Experience with radio isotope myelography from neurosurgical aspects (author's transl)

Experience with Radio Isotope Myelography is reported here. 169Yb-DTPA as a tracer was intrathecally injected at lumbar region in twenty three patients with various spinal cord lesions. The first scanning is perfomed after comfirming by gamma-camera that the tracer reaches to the lesion, the second and the third scannings are done according to the ascending rate of the tracer. (I) Normal scintimyelogram (A) In normal case, the shape of the Radio Isotope Myelogram well corresponds the shape of anatomical subarachnoid space. (B) In normal adult cases, the tracer comes up to the cisterna magna in 20-25 minutes after the lumbar injection. Therefore, the scintimyelographic diagnosis should be made not only by the shape but also by the ascending rapidity of the tracer. (II) Abnormal scintimyelogram Abnormal scintimyelograms could be summarized as following three categories. (A) "Delay": It means delay of the ascending of the tracer. Besides, "Transient delay" found in a case of Arnord-Chiari's malformation was proposed. (B) "Partial block": It meas a defect at the level of the lesion. This "Partial block" were observed in cases of spinal cord angioma, cervical spondylosis and spinal cord tumor etc. (C) "Complete block": It means the stagnation of the tracer below the lesion. To sum up, Rario Isotope Myelography, especially in partial block, can more easily and more sensitively represent the maximum extent of the spinal cord lesion than other myelographic study or angiographic one. On the other hand, we can not qualitatively diagnose about the lesions by its indistinct border.     

A study on physical and mechanical properties for soft to firm clays in Yangon area – Properties of clays deposit at the sedimentary basins in Myanmar

Recently, a great deal of foreign investment has been entered into construction of the social infrastructure of Myanmar. Many construction projects are therefore on-going, and these are especially planned in the Yangon area. While these construction booms are increasing, existing studies on the geotechnical problems in the Yangon area such as problematic soils like soft clays are limited at present. Information on soil properties has also not been shared and has been confined to individual projects. In this paper, the boring and laboratory tests carried out in the Yangon area are selected and focused upon among the tests carried out in Myanmar. Laboratory test results for clay deposits in the Yangon area are analyzed and the differences in soil properties between different sedimentary basins and sub-areas divided by the Tertiary sediment ridge that runs from north to south at the center of Yangon are clarified together with a comparison to the clays found in other countries, which have been previously investigated.     

Investigation and consideration on landslide zoning of multiple slope failures and debris flows of 2014 disaster in Hiroshima,Japan

This study was intended to examine the mechanism of multiple slope failures and debris flows that occurred in the outskirts of Hiroshima on 20th August 2014. A field survey of the mountain stream where large-scale damage was incurred was carried out and the characteristics of debris flows which made serious damages were investigated. There were five findings of this study. (1) The initiation of debris flows was not limited to thin and planar shallow failures, but also showed V or U shapes, where the eroded sediments seemed to be pushed out by artesian water, and the eroded depth exceeded several meters at many locations. (2) There were areas with high permeability, such as faults, fracture zones, and joints in Mt. Abusan. It is inferred that the constantly present groundwater in these areas became artesian water because of a large amount of rainfall in upstream locations. This quickly destabilized the slopes on a large scale. (3) There were at least three estimated debris flows at the mountain stream above Midorigaoka prefectural apartments in Yagi 3-Chome, where the worst damage occurred. The mountain stream near Abu-no-Sato housing complex also had multiple debris flows. Here, the secondary debris flow changed its flow path because of the presence of sediments from an earlier debris flow. (4) The actual volumes of flowed mass were much larger than that predicted at 11 of the 18 mountain streams in Midori-i and Yagi districts. The volume of the mass of five of these mountain streams was more than twice the estimated volume. It is necessary to modify the method of calculating the volume of unstable sediments in the mountain stream. (5) It was found that the devastating damage of buildings and human lives took place in the areas well beyond the special restricted zones. The present method to designate the special restricted zone must be revised considering such problems as the underestimation of the volume of unstable sediments, the assumptions of a single debris flow and on the direction of debris flow, and the effect of the difference on rock and soil types.     

Organic LED full-color passive-matrix display

Abstract— A full-color 5.2-inch 1/4-VGA passive-matrix organic LED display has been developed, adopting selective deposition for the different emitting materials. The display features 320 (×3) × 240 pixels with an equivalent pixel size of 0.33 × 0.33 mm, white peak luminance of over 150 cd/m², and power consumption of 6 W.     

Theoretical analysis of transient gain phenomena in a fast-axialflow type CO2 laser amplifier

A decrease of output power observed after discharging plasma tubes in a fast-axial flow CO₂ laser amplifier with a short dwell time of about 1 ms is discussed. For the 10P(18) line at 50 torr pressure, the small-signal gain goes from 1.308/m to 1.068/m within 135 s after discharging the plasma tubes, for a gas-flow velocity of 180 m/s and discharge current of 60 mA. The fraction of power decrease is about 15% for the plasma length of 80 cm and the input power of 5 W. Dependences of the observed fraction of power-down and the transient time to reach a stable power on input power and plasma length are theoretically analyzed by introducing the CO₂ dissociation factor as a function of gas-flow velocity, discharge current and plasma length, and gain saturation, resulting in good agreement between the experimental results and computation     

Gianotti-Crosti syndrome associated with cytomegalovirus antigenemia after bone marrow transplantation

Gianotti-Crosti syndrome (GCS) is characterized by a distinctive self-limiting acral papular or papulovesicular eruption associated with an underlying viral illness. It has not been previously reported in patients post-bone marrow transplantation. We report a 6-year-old Japanese boy who underwent allogeneic bone marrow transplantation from an unrelated donor for acute lymphoblastic leukemia (ALL) in second remission. He had clinical and histopathologic findings characteristic of GCS and evidence of subclinical infection with cytomegalovirus (CMV) detected by CMV antigenemia assay. It is likely that CMV is the causative agent for the GCS in this case.     

Cesium-adsorption capacity and hydraulic conductivity of sealing geomaterial made with marine clay,bentonite, and zeolite

Great amounts of soil and waste contaminated with radioactive cesium have been generated due to the decontamination work after the Fukushima Daiichi Nuclear Power Plant accident. The aim of this study is to develop a sealing geomaterial for use at the disposal facilities of the soil and waste constructed in the maritime environment. The geomaterial consists of marine clay, bentonite, and zeolite. The hydraulic conductivity and cesium-adsorption performance of the geomaterial were examined through laboratory tests with different proportions of bentonite and zeolite added to marine clay. It was concluded that the hydraulic conductivity could be reduced to the required level by increasing the amount of bentonite and that the cesium-adsorption capacity could be enhanced by increasing the amount of zeolite.