Ultrafast Electron–Phonon Coupling at Metal-Dielectric Interface

Energy transfer from photo-excited electrons in a metal thin film to the dielectric substrate is important for understanding the ultrafast heat transfer process across the two materials. Substantial research has been conducted to investigate heat transfer in a metal-dielectric structure. In this work, a two-temperature model in metal was used to analyze the interface electron and dielectric substrate coupling. An improved temperature and wavelength-dependent Drude–Lorentz model was implemented to interpret the signals obtained in optical measurements. Ultrafast pump-and-probe measurements on Au-Si samples were carried out, where the probe photon energy was chosen to be close to the interband transition threshold of gold to minimize the influence of non-equilibrium electrons on the optical response and maximize the thermal modulation to the optical reflectance. Electron-substrate interface thermal conductance at different pump laser fluences was obtained, and was found to increase with the interface temperature.     

Low temperature crystallographic data on Kevlar 49 fibres

Using X-ray diffraction data, the behaviour of Kevlar 49 fibres at low temperatures, up to –100°C, has been analysed. During cooling, the basal plane of the monoclinic unit cell shrinks whereas the c- (unique, chain axis) length is not significantly affected. In contrast, in the return heating cycle to ambient temperature, the basal plane expands and contraction occurs along the chain direction. The unit cell registers a reduction in volume in both the cooling and heating cycles. Conspicuously, after a cycle of cooling and heating, the unit cell does not return to its initial volume.     

Reducing cycle times in manufacturing and supply chains by input and service rate smoothing

A key performance parameter of a manufacturing network or supply chain is its cycle time; the time that a typical item spends in the network. A previous simulation study on a semiconductor assembly and test facility showed that cycle times could be reduced by having smooth input and service rates. This suggested that there is a “cycle time principle” that, for a system with a specified throughput or input rate, the shortest cycle times are obtained when the input and service rates do not vary over time. We prove that this principle is true for the M/G/1 and M/M/s queueing systems and Jackson networks. The analysis involves establishing several results on the concavity of waiting time probabilities and the convexity of expected waiting times and queue lengths, as functions of input and service rates. These results also have natural uses in other optimization problems.     

Nonlinear protein binding and enzyme heterogeneity: effects on hepatic drug removal

The kinetics of substrate removal by the liver and the resulting nonlinear changes in unbound fraction along the flow path at varying input drug concentrations were examined by a model simulation study. Specifically, we varied the binding association constant, KA, and the Michaelis-Menten constants (Km and Vmax) to examine the steady state drug removal (expressed as hepatic extraction ratio E) and changes in drug binding for (i) unienzyme systems and (ii) simple, parallel metabolic pathways; zonal metabolic heterogeneity was also added as a variable. At low KA, E declined with increasing input drug concentration, due primarily to saturation of enzymes; only small differences in binding were present across the liver. At high KA, a parabolic profile for E with concentration was observed; changes in unbound fraction between the inlet and the outlet of the liver followed in parallel fashion. Protein binding was the rate-determining step at low input drug concentrations, whereas enzyme saturation was the rate-controlling factor at high input drug concentration. Heterogeneous enzymic distribution modulated changes in unbound fraction within the liver and at the outlet. Despite marked changes in unbound fraction occurring within the liver for different enzymic distributions, the overall transhepatic differences were relatively small. We then investigated the logarithmic average unbound concentration and the length averaged concentration as estimates of substrate concentration in liver in the presence of nonlinear drug binding. Fitting of simulated data, with and without assigned random error (10%), to the Michaelis-Menten equation was performed; fitting was repeated for simulated data obtained with presence of a specific inhibitor of the high-affinity, anteriorly distributed pathway. Results were similar for both concentration terms: accurate estimates were obtained for anterior, high affinity pathways; an overestimation of parameters was observed for the lower affinity posteriorly distributed pathways. Improved estimations were found for posteriorly distributed pathways upon inhibition with specific inhibitors; with added random error, however, the improvement was much decreased. We applied the method for fitting of several sets of metabolic data obtained from rat liver perfusion studies performed with salicylamide (SAM) (i) without and (ii) with the presence of 2,6-dichloro-4-nitrophenol (DCNP), a SAM sulfation inhibitor. The fitted results showed that SAM sulfation was a high-affinity high-capacity pathway; SAM glucuronidation was of lower affinity but comparable capacity as the sulfation pathway, whereas SAM hydroxylation was of lower affinity and lower capacity.     

Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

Preparation of glucose oxidase immobilized in different carriers using radiation polymerization

Glucose oxidase (EC 1.1.3.4) was immobilized on different polymeric materials using different immobilization techniques (entrapping by γ‐irradiation, and covalent binding using epichlorohydrin). Studies were carried out to increase the thermal stability of glucose oxidase (GOD) for different applications. The activity and stability of the resulting biopolymers have been compared with those of free GOD. The effect of different polyvinyl alcohol/polyacrylamide (PVA/PAAm) compositions of the copolymer carrier on the enzymatic activity of the immobilized GOD was studied. The maximum enzymatic activity was obtained with the composition ratio of PVA/PAAm of 60:40. The behaviour of the free and immobilized enzyme was analysed as a function of pH. A broadening in the pH profile (5.5–8) was observed for immobilized preparations. The activity and stability of the resulting biopolymers produced by immobilization of GOD onto different carriers have been compared, in both aqueous and organic media, with those of the free GOD. The enzyme's tolerance toward both heat and organic solvent was enhanced by immobilization onto polymers. The addition of different concentrations of organic solvents (10–50%, v/v) to the enzyme at higher temperature (60 °C) was found to stabilize the enzyme molecule. The strongest stabilizing effect on the enzymatic activity was achieved at a concentration of 10%. Copyright © 2005 Society of Chemical Industry     

Disaster recovery planning in an automated manufacturingenvironment

Disasters may strike at any moment in any location. When they do, no distinction is made about the type of firm that is being affected, whether it is a bank or a manufacturing plant. Most firms do not plan for possible disasters, and those that do have typically focused on computer and data contingency planning. In this paper, the focus is shifted to incorporate disaster recovery planning for manufacturing enterprises, especially those that are automated. Automated manufacturing enterprises have characteristics that put them at an increased risk to disasters. The methodological framework proposed in this paper will aid manufacturing organizations and their managers in reducing the risks associated with unanticipated disasters. The framework is termed the “Manufacturing Operations Recovery and Resumption” model. Recommended activities and tools for effective management of this methodology are identified     

High-dose busulfan, melphalan, thiotepa and peripheral blood stem cell infusion for the treatment of metastatic breast cancer

The purpose of this study was to determine the outcome of patients with metastatic breast cancer treated with high-dose busulfan (Bu), melphalan (Mel) and thiotepa (TT) followed by peripheral blood stem cell (PBSC) infusion. Fifty-one patients with chemotherapy refractory (n = 32) or responsive (n = 19) metastatic breast cancer received Bu (12 mg/kg), Mel (100 mg/m2) and TT (500 mg/m2) followed by PBSC collected after chemotherapy and growth factor (n = 43) or growth factor alone (n = 8). The 100 day treatment-related mortality was 8% including one death from cytomegalovirus pneumonia, one from aspiration pneumonia and two from regimen-related toxicity (RRT). Seven of 28 refractory (25%) and 5/7 (71%) responsive patients with evaluable disease achieved a complete response of all measurable disease or all soft tissue disease with at least improvement in bone lesions (PR*). Fifteen of 51 patients (29%) are alive and progression-free a median of 423 days (range 353-934) after treatment, 5/32 (16%) with refractory disease and 10/19 (53%) with responsive disease. The probabilities of progression-free survival (PFS) at 1.5 years for the patients with refractory (n = 32) and responsive (n = 19) disease were 0.24 and 0.53, respectively. These preliminary data suggest that high-dose Bu/Mel/TT has significant activity in patients with advanced breast cancer and may be superior to some previously published regimens.     

Selective phosphorylation of adult tau isoforms in mature hippocampal neurons exposed to fibrillar A beta

How senile plaques and neurofibrillary tangles are linked represents a major gap in our understanding of the pathophysiology of Alzheimer's disease. We characterized a hippocampal neuronal culture system in which tau undergoes maturation in vivo; rat neurons maintained in culture for more than 3 weeks replicated the splicing and phosphorylation changes that tau undergoes upon maturation in situ. Using this model system, we induced an Alzheimer-like neuritic dystrophy following the application of fibrillar beta-amyloid. The dystrophy consisted of focal distortions and swellings within the neurites and an altered phosphorylation of the adult tau isoforms. Fibrillar beta-amyloid induced the concomitant activation of MAP kinase and GSK3 beta. The aberrant activation of several signaling pathways may lead to the abnormal phosphorylation of tau and neuritic degeneration.