An FEC scheme combined with weighted scheduling to reduce multicast packet loss in IPTV over PON

Congestion is one of the most important challenges in optical networks. In a Passive Optical Network (PON), the Optical Line Terminal (OLT) is a bottleneck and congestion prone. In this paper, a framework is proposed with Forward Error Correction (FEC) at the IP layer combined with Weighted Round Robin (WRR) at the scheduling level to overcome packet-loss due to congestion in the OLT in order to achieve efficient video multicasting over PON. In the FEC scheme, Reed-Solomon (RS(n,k)) with erasure coding is used, where (n−k) erroneous symbols per n symbol blocks can be corrected. In our framework, an Internet Protocol TeleVision (IPTV) service provider uses the mentioned RS coding and generates redundant packets from regular IPTV packets in such a way that an Optical Network Unit (ONU) can recover lost packets from received packets, thus resulting in a better video quality. Simulation results show that using the proposed framework, an ONU can recover many lost packets and achieve better video quality under different traffic loads for its users. For instance, the proposed method can reduce packet loss rate by almost 55% and 10% under traffic load 0.9, respectively, compared with the Round Robin (RR) and WRR methods under symmetric traffic load. When High Receivers Queue (HRQ) traffic (i.e., traffic received by many users) is twice Low Receivers Queue (LRQ) traffic (i.e., traffic received by a small number of users), this reduction is almost 86% and 30% under traffic load 0.9. Finally, when LRQ traffic is twice HRQ traffic, the reduction in packet loss rate is almost 70% and 91% at traffic load 0.5.     

A hybrid metaheuristic approach for the capacitated p-median problem

The capacitated p-median problem (CPMP) seeks to obtain the optimal location of p medians considering distances and capacities for the services to be given by each median. This paper presents an efficient hybrid metaheuristic algorithm by combining a proposed cutting-plane neighborhood structure and a tabu search metaheuristic for the CPMP. In the proposed neighborhood structure to move from the current solution to a neighbor solution, an open median is selected and closed. Then, a linear programming (LP) model is generated by relaxing binary constraints and adding new constraints. The generated LP solution is improved using cutting-plane inequalities. The solution of this strong LP is considered as a new neighbor solution. In order to select an open median to be closed, several strategies are proposed. The neighborhood structure is combined with a tabu search algorithm in the proposed approach. The parameters of the proposed hybrid algorithm are tuned using design of experiments approach. The proposed algorithm is tested on several sets of benchmark instances. The statistical analysis shows efficiency and effectiveness of the hybrid algorithm in comparison with the best approach found in the literature.     

Attitude of Iranian physicians and nurses toward a clinical decision support system for pulmonary embolism and deep vein thrombosis

This research project sought to design and implement a computerized clinical decision support system (CDSS) that was able to identify patients who were at risk of pulmonary embolism (PE) and deep vein thrombosis (DVT), as well as produce reminders for prophylactic action for these diseases. The main purpose of the CDSS was to attempt to reduce the morbidity and mortality caused by embolism and thrombosis in patients admitted to hospitals. After implementation of this system in one of the large educational hospitals of Iran, a standard questionnaire was used, and interviews were conducted with physicians and nurses to evaluate the performance of the designed system for reducing the incidence of pulmonary embolism and thrombosis. From physicians and nurses’ point of view, a system which assists the medical staff in making better decisions regarding patient care, and also reminds pulmonary embolism and thrombosis preventive procedures with timely warnings, can influence patient care quality improvement and lead to the improved performance of the medical staff in preventing the incidence of pulmonary embolism and thrombosis.     

Nano-second UV laser processed micro-grooves on Ti6Al4V for biomedical applications

Laser surface texturing can be used to produce well defined micro-grooves on biomedical materials such as Ti-6Al-4V. Such micro-grooves can be optimized to improve the integration with surrounding tissue. This paper examines the effects of Gaussian shaped beam profiles for nano-second laser processing on the laser micro-groove geometry, topography, and micro-structure of Ti-6Al-4V under atmospheric conditions. Laser and machining parameters such as pulse rate, scan speed, wavelength, groove width and pitch are shown to affect the resulting micro-groove geometries. In contrast to prior micro-groove studies using top-hat beam profiles with ultra-violet (UV) Excimer lasers or large area masking techniques, grooves produced with Nd:YVO₄ exhibit improved roughness parameters and reduced heat-affected zones. Initial processing parameters are established for the fabrication of micro-groove geometries on flat geometries that are relevant to biomedical implants and devices.     

Capacitive micromachined ultrasonic transducers: next-generation arrays for acoustic imaging?

Piezoelectric materials have dominated the ultrasonic transducer technology. Recently, capacitive micromachined ultrasonic transducers (CMUTs) have emerged as an alternative technology offering advantages such as wide bandwidth, ease of fabricating large arrays, and potential for integration with electronics. The aim of this paper is to demonstrate the viability of CMUTs for ultrasound imaging. We present the first pulse-echo phased array B-scan sector images using a 128-element, one-dimensional (1-D) linear CMUT array. We fabricated 64- and 128-element 1-D CMUT arrays with 100% yield and uniform element response across the arrays. These arrays have been operated in immersion with no failure or degradation in performance over the time. For imaging experiments, we built a resolution test phantom roughly mimicking the attenuation properties of soft tissue. We used a PC-based experimental system, including custom-designed electronic circuits to acquire the complete set of 128 x 128 RF A-scans from all transmit-receive element combinations. We obtained the pulse-echo frequency response by analyzing the echo signals from wire targets. These echo signals presented an 80% fractional bandwidth around 3 MHz, including the effect of attenuation in the propagating medium. We reconstructed the B-scan images with a sector angle of 90 degrees and an image depth of 210 mm through offline processing by using RF beamforming and synthetic phased array approaches. The measured 6-dB lateral and axial resolutions at 135 mm depth were 0.0144 radians and 0.3 mm, respectively. The electronic noise floor of the image was more than 50 dB below the maximum mainlobe magnitude. We also performed preliminary investigations on the effects of crosstalk among array elements on the image quality. In the near field, some artifacts were observable extending out from the array to a depth of 2 cm. A tail also was observed in the point spread function (PSF) in the axial direction, indicating the existence of crosstalk. The relative amplitude of this tail with respect to the mainlobe was less than -20 dB.     

Analysis of transport phenomena within PEM fuel cells – An analytical solution

Transport phenomena within PEM fuel cells are investigated and a comprehensive analytical solution is presented. The methodology couples the transport within the fuel cell supply channels and the substrate which is composed of five different layers. The layers are all treated as macroscopically homogeneous porous media with uniform morphological properties such as porosity and permeability. The locally volume-averaged equations are employed to solve for transport through the porous layers. The problem encompasses complex interfacial transport phenomena involving several porous–porous as well as porous–fluid interfaces. Chemical reactions within the catalyst layers are also included. The method of matched asymptotic expansions is employed to solve for the flow field and species concentration distributions. Throughout the analysis, the choice of the gauge parameters involved in the perturbation solutions for velocity and concentration is found to be inherently tied to the physics of the problem and therefore an important physical metric. The analytical solution is found to be in excellent agreement with prior computational simulations. The analytical results are used to investigate several aspects of transport phenomena and their substantial role in PEM fuel cell operation. The solution presented in this work provides the first comprehensive analytical solution representing fuel cell transport phenomena.     

Operation of quantum-dot semiconductor optical amplifiers under nonuniform current injection

The influence of nonuniform current injection along the active region, on the linear operation of a quantum-dot semiconductor optical amplifier (QD-SOA) is investigated. For this purpose, we have utilized some functions to generate various nonuniform current injection profiles. These profiles have been considered in our numerical calculations, where the rate equation model is employed to construct different characteristics of the QD-SOA. We have found that the gain, as well as the crosstalk, of a QD-SOA is closely associated to the variance of the carrier density along the cavity. Simulation results show that nonuniform current injection can be used as a technique for gain enhancement as well as crosstalk suppression.