Visualization of mitochondria with green fluorescent protein in cultured fibroblasts from patients with mitochondrial diseases

cDNAs for green fluorescent protein (GFP) and for a GFP fusion protein containing the presequence of human ornithine transcarbamylase (pOTC-GFP) were transfected into cultured human fibroblasts. GFP cDNA gave diffuse fluorescence throughout the cytoplasm and the nucleus, whereas pOTC-GFP cDNA gave mitochondria-associated fluorescence. Fluorescent mitochondrial structures could be classified into five patterns: thread-like mitochondria, fine thread-like ones, rod-like ones, granular ones, and granular ones with weak cytosolic fluorescence. pOTC-GFP mutants resulted in a loss of mitochondrial fluorescence and an appearance of weak fluorescence throughout the cytoplasm. pOTC-GFP cDNA was transfected into fibroblasts from patients with various mitochondrial diseases. Higher ratios of fibroblasts with granular mitochondria and those with fine thread-like ones were observed in a patient with Reye's syndrome and a patient with Kearns-Sayre syndrome. Weak cytosolic fluorescence was sometimes observed in fibroblasts from these patients. This method will be useful to analyze mitochondrial structural alterations and disorders of mitochondrial protein import.     

Subsurface structures in initial stage of FeSi2 growth studied by high-resolution Rutherford backscattering spectroscopy

The initial stage of iron silicide formation is investigated by high-resolution Rutherford backscattering spectroscopy. During the Fe deposition on Si(001) at 470 °C, the formation of FeSi₂ is confirmed by the surface peak analysis. Initially, FeSi₂ grows epitaxially so that one of the major crystallographic axes is parallel to the <111> axis of the Si substrate. With increasing Fe deposition, the deviation between the major crystallographic axis of the silicide region and Si<111> increases although the electron diffraction pattern is independent of the amount of Fe deposition. Therefore, the subsurface crystallographic structure of iron silicide is transformed from a cubic-like to a low-symmetry structure.     

High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

A Novel Artificially Humanized Anti-Cripto-1 Antibody Suppressing Cancer Cell Growth

Cripto-1 is a member of the EGF-CFC/FRL1/Cryptic family and is involved in embryonic development and carcinogenesis. We designed a novel anti-Cripto-1 artificial antibody and assessed the recognition to the antigen and the potential to suppress the growth of cancer stem cells. First, single chain antibody clones were isolated by bio-panning with the affinity to recombinant Cripto-1 protein from our original phage-display library. Then, the variable regions of heavy chain VH and light chain VL in each clone were fused to constant regions of heavy chain CH and light chain CL regions respectively. These fused genes were expressed in ExpiCHO-S cells to produce artificial humanized antibodies against Cripto-1. After evaluation of the expression levels, one clone was selected and the anti-Cripto-1 antibody was produced and purified. The purified antibody showed affinity to recombinant Cripto-1 at 1.1 pmol and immunoreactivity to cancer tissues and cell lines. The antibody was available to detect the immunoreactivity in tissue microarrays of malignant tumors as well as in Cripto-1 overexpressing cells. Simultaneously, the antibody exhibited the potential to suppress the growth of human colon cancer derived GEO cells overexpressing Cripto-1 with IC₅₀ at approximately 110 nM. The artificially humanized antibody is proposed to be a good candidate to target cancer cells overexpressing Cripto-1.     

Preparation and properties of graft and block copolymers of poly(p-phenylene terephthalamide) with polybutadiene

Graft copolymers of polybutadiene (PBD) onto poly(p-phenylene terephthalamide) (PPTA) were prepared by the nucleophilic substitution of N-metalated PPTA with telechelic PBD having bromide end groups. Block copolymers were synthesized by the condensation reaction of telechelic PBD having acid chloride end groups with amino-group-terminated PPTA. The structure of these copolymers was identified by IR spectra. Graft and block copolymers contained PBD segments up to 85 wt % and 45 wt %, respectively. Thermomechanical analyses (TMA) proved the existence of distinctive primary absorption peak corresponding with T_g of PBD for both graft and block copolymers. The T_g's of both types of the copolymers were further ascertained by the DSC curves. TMA curves suggested that the microphase separation occurred between PPTA and PBD. The incorporation of PPTA segments into PBD increased the decomposition temperature compared with the blend polymer composed of PPTA and PBD with the same composition.     

Structural significance of the alkyl substituent at the C-4 of (+)-trans-verbenyl acetate in sex pheromonal activity of the American cockroach

The significance of the alkyl group at the C-4 of (+)-trans-verbenyl acetate, which is the sex pheromone mimic of the American cockroach, was investigated. Seven alcohols possessing an ethyl, propyl, or dimethyl group at this position of the 6,6-dimethylbicyclo[3.1.1]heptane skeleton were synthesized and evaluated by behavioral assay. All of the alcohols were inactive, while three of four acetates of the 2-alcohols induced sexual behavior in male cockroaches at the 0.02 or 0.5 mg dosage level, either of which is many orders of magnitude higher than the threshold level of the natural sex pheromones (10^–8 mg). Among the acetates, the compounds with a methyl group or an -oriented ethyl group at C-4 showed the highest activity. The results are discussed in terms of spatial requirements of the molecules for interactions with the receptor.Studies on the sex pheromone mimic of the American cockroach, (+)-trans-verbenyl acetate. Part VIII. For Part VII, seeComp. Biochem. Physiol.,70A: 229–234 (1981).     

Preparation of poly(p-phenylene terephthalamide)/poly(vinyl chloride) molecular composite and its thermal and mechanical properties

Poly(p-phenylene terephthalamide) (PPTA) was blended with poly(vinyl chloride) (PVC) by solution-blending method. PPTA was metalated for dissolving in dimethyl sulfoxide. Dimethyl sulfoxide was used as a common solvent. In PPTA/PVC composite, PPTA accelerated the thermal degradation of PVC. PPTA molecules are aggregated as microfibrillar form in PVC matrix. Such microfibrils are dispersed homogeneously in PVC matrix, according to polarizing microscopic observation. The average diameter of the microfibrils becomes smaller in the composite with lower content of PPTA. In the surface region of PPTA microfibrils the intermolecular hydrogen bonds between C? Cl of PVC and N? H of PPTA are formed. Young's modulus and the yield stress at room temperature were higher in the composites than those in PVC. The modulus of the composites was higher, especially at the high temperatures above their glass transition temperatures, than that in PVC. The temperature dependence of modulus can be calculated by using the mechanical model equivalent to the quasi-3-dimensional microfibrillar model which will be approximately applied to the composite structure. It becomes apparent that the modulus of the PPTA microfibrils evaluated by using the mechanical model is higher in the higher molecular weight PPTA.     

Effect of SiC on Interfacial Reaction and Sintering Mechanism of TiB2

Compacts of TiB₂ with densities approaching 100% are difficult to obtain using pressureless sintering. The addition of SiC was very effective in improving the sinterability of TiB₂. The oxygen content of the raw TiB₂ powder used in this research was 1.5 wt%. X-ray photoelectron spectroscopy showed that the powder surface consisted mainly of TiO₂ and B₂O₃. Using vacuum sintering at 1700°C under 13–0.013 Pa, TiB₂ samples containing 2.5 wt% SiC achieved 96% of their theoretical density, and a density of 99% was achieved by HIPing. TEM observations revealed that SiC reacts to form an amorphous phase. TEM-EELS analysis indicated that the amorphous phase includes Si, O, and Ti, and X-ray diffraction showed the reaction to be TiO₂+ SiC → SiO₂+ TiC. Therefore, the improved sinterability of TiB₂ resulted from the SiO₂ liquid phase that was formed during sintering when the raw TiB₂ powder had 1.5 wt% oxygen.     

Depolymerization of fluoroalkyl methacrylate polymers as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate) prepared by γ-or UV-ray polymerization were investigated by using thermogravimetric measurements with the intermittent analysis of the gaseous products. The degradation of fluoroalkyl methacrylate polymers, monomeric units of which were CH₂=C(CH₃)COOCH₂(CF₂CF₂)_nH, n = 1, 2, and 3, proceeded according to the depolymerization mechanism reproducing the pristine monomer exclusively, but the thermogram in inert atmosphere showed the features of a two-step reaction. Two species of polymer differing in the heat stability were supposed to exist in the polymeric substance produced by γ- or UV-ray irradiation, and the fraction of polymer having lower heat stability increased with the increasing length of the fluoroalkyl ester group. In air, however, the thermogram of poly(fluoroalkyl methacrylate) showed no such a stepwise weight decrease as was observed in inert atomsphere with the elevating temperature, and the temperatures at which the depolymerization was introduced shifted to a much higher region. The results were ascribed to the reaction of initiating polymer radicals produced on polymer having lower stability with oxygen to form hydroperoxide, which once stabilized the polymer radicals and obstructed the initiaition of the unzipping reaction till higher temperature.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.