Effect of biochemical storage on the denitrification potential of acetate in sequencing batch reactors.

This study evaluates the effect biochemical storage on the denitrification potential (N(DP)) of acetate. The fate of bacterial storage is evaluated in a sequencing batch reactor system operated in a sequence of anoxic/aerobic phases, fed with acetate as a pulse and continuously under anoxic conditions. N(DP) is defined based on system stoichiometry both for direct growth and storage on acetate. Experimental results do not support conceptual calculations based on system stoichiometry, yielding a higher denitrification potential, N(DP), for continuous feeding than the N(DP) obtained with pulse feeding, due to partial utilisation of the stored PHB within the anoxic phase. The nitrate, acetate and poly-beta-hydroxybutyrate (PHB) profiles obtained in the experimental studies were used in model calibrations for two different feeding patterns. Results of model simulations confirm the experimental results and evaluate the effects imposed on the denitrification potential by sludge age and the anoxic volume ratio.     

Prioritized Mobile Robot Exploration Based on Percolation Enhanced Entropy Based Fast SLAM

The major aim in search and rescue using mobile robots is to detect and reach trapped survivors and to support rescue operations through disaster environments. Our motivation is based on the fact that a search and rescue (SAR) robot can navigate within and penetrate a disaster area only if the area in question possesses connected voids. Traversability or penetrability of a disaster area is a primary factor that guides the navigation of a search and rescue (SAR) robot, since it is highly desirable that the robot, without hitting a dead end or getting stuck, keeps its mobility for its primary task of reconnaissance and mapping when searching the highly unstructured environment. We propose a novel percolation guidance that collaborates with entropy based SLAM under a switching control setting the priority to either position or map accuracy. This newly developed methodology has proven to combine the superiority of both percolator guidance and entropy based prioritization so that the active SLAM becomes speedy, with high coverage rate of the area as well as increased accuracy in localization. Our percolator guidance stems from a frontier based conditioning of a-posteriori occurrences of upcoming connected voids that uses the fact that every obstacle partially seen at the frontier of the explored domain has a spatial continuity into the unexplored area. The developed modular architecture is introduced in details and demonstrative examples are provided and discussed.     

Synthesis,structural characterization,and antiproliferative/cytotoxic effects of a novel modified poly(maleic anhydride-co-vinyl acetate)/doxorubicin conjugate

Polymer Bulletin - Drug carrier, poly(maleic anhydride-co-vinyl acetate) (MAVA or poly[MA-co-VA]) copolymer, was traditionally synthesized by free radical chain polymerization reaction, in methyl...     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Effect of current density on the corrosion protection performance of polyaniline coated AISI 4140 steel

The present work reports on electropolymerisation of aniline onto AISI 4140 steel substrate at room temperature in oxalic acid media by the potentiodynamic electrodeposition method. The effect of coating current density on the morphology of conductive polymer films and their corrosion behaviour has been investigated. The electrolyte solution comprised 0.1 M aniline?+?0.3 M oxalic acid. The effects of deposition current density changes (0.1, 0.2, 0.3, 0.4 and 0.5?mA cm^?2) on the films were investigated. The PANI film was characterised using cyclic voltammetry and optical microscopy; it was covered with a dark green-yellow homopolymer film of strongly adherent homogeneous characteristic. The corrosion behaviour of steel electrodes with and without polyaniline (PANI) film in 3.5 wt-% NaCl solution was investigated through anodic polarisation curves. The results indicated that the PANI coating obtained under 0.2?mA cm^?2 was the most corrosion protective.     

Robust microencapsulated phase change materials in concrete mixes for sustainable buildings

For passive building applications, phase change materials (PCMs) are microencapsulated to avoid leakage of PCM from concrete structure. The primary challenge of using microencapsulated PCM (MPCM) is its weak shell structure. New MPCMs with different shell compositions to prevent breakage during mixing in fresh concrete are needed. In this study, free radical polymerization method to microencapsulate capric acid–myristic acid mixture as PCM with two different methyl methacrylate co‐polymers is proposed to produce robust MPCMs for building applications. Two new microcapsules (MPCM‐1 and MPCM‐2) having latent heats of 91.9 and 97.3 J/g were synthesized. SEM analyses showed the size of microcapsules being in the range of 400–850 nm for MPCM‐1 and 250–475 nm for MPCM‐2. Analyses also reveal that the shells of MPCMs were not harmed, as they were added into concrete mixes. The microsphere's geometry was preserved, and distribution was homogeneous. The MPCMs were also studied under thermal tests of 1000 heating/cooling cycles. No significant changes in thermal properties were observed after thermal cycling tests. Copyright © 2016 John Wiley & Sons, Ltd.     

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

The development of new binders, as an alternative to traditional cement, by the alkaline activation of industrial by-products (i.e. ground granulated slag and fly ash) is an ongoing research topic in the scientific community [Puertas F, Amat T, Jimenez AF, Vazquez T. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003;33(12): 2031–6]. The aim of this study was to investigate the feasibility of using and alkaline activated ground Turkish slag to produce a mortar without Portland cement (PC).Following the characterization of the slag, mortar specimens made with alkali-activated slag were prepared. Three different activators were used: liquid sodium silicate (LSS), sodium hydroxide (SH) and sodium carbonate (SC) at different sodium concentrations. Compressive and flexural tensile strength of alkali-activated slag mortar was measured at 7-days, 28-days and 3-months. Drying shrinkage of the mortar was measured up to 6-months. Setting times of the alkali-activated slag paste and PC paste were also measured.Setting times of LSS and SH activated slag pastes were found to be much slower than the setting time of PC paste. However, slag paste activated with SC showed similar setting properties to PC paste.LSS, SH and SC activated slag mortar developed 81, 29, and 36 MPa maximum compressive strengths, and 6.8, 3.8, and 5.3 MPa maximum flexural tensile strengths at 28-days. PC mortar developed 33 MPa compressive strength and 5.2 MPa flexural tensile strength. LSS and SH activated slag mortars were found to be more brittle than SC activated slag and PC mortars.Slag mortar made with LSS had a high drying shrinkage, up to six times that of PC mortar. Similarly, slag mortar made with SH had a shrinkage up to three times that of PC mortar. However, SC activated slag mortar had a lower or comparable shrinkage to PC mortar. Therefore, the use of SC as an activator for slag mortar is recommended, since it results in adequate strength, similar setting times to PC mortar and comparable or lower shrinkage.     

Anode effect elimination by subsonic and sonic vibrations

The only method so far used industrially to produce primary aluminum is the combination of the Bayer process with the Hall-Héroult process. The production process of aluminum which was patented by Charles Martin Hall and Paul Louis Toussaint Héroult in 1886, has long been important in our daily lives and that importance is likely to increase year by year. In this study, different subsonic and sonic vibrations, which were obtained from a 0.30 kW, 1,400 rpm three-phase motor, also a 0.55 kW, 2,800 rpm three-phase motor and 0.75 kW frequency converter, were applied to a laboratory-type aluminum electrolysis cell and the possibility of eliminating the anode effect was investigated.     

Natural radioactivity in various surface waters in stanbul, Turkey

Gross-α and gross-β, activities of eight well and five tap water samples taken in stanbul were determined. Ra²²⁶, Rn²²², Pb²¹⁴, Bi²¹⁴, K⁴⁰, Cs¹³⁷ activity concentrations in four lake, four sea water, one snow and one rain water samples were also analyzed in order to determine their radioactivity. The results obtained showed that, in general, natural activities in drinking water samples did not exceed WHO and ITS guidelines. In sea and lake water, four samples were over WHO and TSI guidelines. Concentrations ranging from 0.007 to 0.04 Bq l⁻¹ and from 0.02 to 0.1 Bq l⁻¹ were observed for drinking water and the gross-α and gross-β activities, respectively. For all samples the gross-β activities were higher than the corresponding gross-α activities. In order to evaluate the annual effective dose equilavent of ingestion of these waters, a conservative dosimetric calculation was carried out using dose conversion factor suggested by the ICRP. An average annual effective dose equivalent of 0.84 μSv y⁻¹ for Ra²²⁶ was calculated.