Transthyretin amyloidosis: a new mutation associated with dementia

NaCl-tolerant lactic acid bacteria (LAB) strains LC-10 (Lactobacillus casei) and LP-15 (Lact. plantarum) and NaCl were used as additives to sorghun (Sorghum bicolor). Numbers of LAB were significantly (P < 0.05) higher in all the additive-treated silages than in the control silage at an early stage of ensiling. During the fermentation process, addition of NaCl or LAB effectively inhibited the growth of aerobic bacteria and clostridia, but not yeasts. All the additive-treated silages had significantly (P < 0.05) lower pH, ammonia nitrogen content, dry matter loss and gas production but significantly (P < 0.05) higher lactic acid content and residual water soluble carbohydrates compared with the control silage. The improvement in silage quality was in the order: LAB > NaCl > control. Yeast counts were high in all additive-based silages and they increased during the exposure of the silages to air. As a result, these silages suffered aerobic deterioration, whereas the control silage was stable. The results confirmed that the NaCl or LAB improved fermentation quality but did not prevent aerobic deterioration of the silage.     

The gene encoding human glutathione synthetase (GSS) maps to the long arm of chromosome 20 at band 11.2

Two forms of glutathione synthetase deficiency have been described. While one form is mild, causing hemolytic anemia, the other more severe form causes 5-oxo-prolinuria with secondary neurological involvement. Despite the existence of two deficiency phenotypes, Southern blots hybridized with a glutathione synthetase cDNA suggest that there is a single glutathione synthetase gene in the human genome. Analysis of somatic cell hybrids showed the human glutathione synthetase gene (GSS) to be located on chromosome 20, and this assignment has been refined to subband 20q11.2 using in situ hybridization.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

In search of a reliable marker of tissue injury during heart surgery

We report on a new patient with d-transposition of the great arteries who was found to have deletion of 22q11.2. He had minor facial anomalies, normal T- and B-cell subsets, and transient hypocalcemia. Similar to rare previous reports, our patient's extracardiac manifestations were relatively mild.     

Ionic liquids as electrolytes

Salts having a low melting point are liquid at room temperature, or even below, and form a new class of liquids usually called room temperature ionic liquids (RTIL). Information about RTILs can be found in the literature with such key words as: room temperature molten salt, low-temperature molten salt, ambient-temperature molten salt, liquid organic salt or simply ionic liquid. Their physicochemical properties are the same as high temperature ionic liquids, but the practical aspects of their maintenance or handling are different enough to merit a distinction. The class of ionic liquids, based on tetraalkylammonium cation and chloroaluminate anion, has been extensively studied since late 1970s of the XX century, following the works of Osteryoung. Systematic research on the application of chloroaluminate ionic liquids as solvents was performed in 1980s. However, ionic liquids based on aluminium halides are moisture sensitive. During the last decade an increasing number of new ionic liquids have been prepared and used as solvents. The general aim of this paper was to review the physical and chemical properties of RTILs from the point of view of their possible application as electrolytes in electrochemical processes and devices. The following points are discussed: melting and freezing, conductivity, viscosity, temperature dependence of conductivity, transport and transference numbers, electrochemical stability, possible application in aluminium electroplating, lithium batteries and in electrochemical capacitors.     

Self-foaming diphenolic acid benzoxazine

This work concerns the investigation of porous polybenzoxazines based on the non-toxic renewable diphenolic acid. The approach described relies on the in situ generation of foaming agent (CO₂) during the thermal curing. For this purpose, the previously synthesized benzoxazine monomer from diphenolic acid was thermally polymerized at different temperatures. As the beginning of decarboxylation is about 200 °C, we selected five foaming temperatures (T_f) ranging from 190 to 230 °C. The influence of the foaming temperature on the cellular structure and its dependency on final properties is discussed.     

Renewable polybenzoxazines based in diphenolic acid

The reaction of mixtures of renewable diphenolic acid (DPA) and its methylesterbenzoxazine derivative (MDP-Bz) has been studied. The DPA was introduced to lower the high temperature needed to complete the curing of the pure benzoxazine. In this way, samples with different DPA/MDP-Bz ratio (0, 2, 5, 10 and 25% of DPA) were investigated. Moreover, high performance flame retardant thermosetting resins with phosphorus were prepared through the mixture of MDP-Bz and a DPA-phosphazene derivative (DPA-PPZ). The curing behavior of these materials was studied by differential scanning calorimetry (DSC). Finally, the properties of the materials were evaluated by termogravimetric analysis (TGA), dynamic mechanical analysis (DMTA), tensile measurements, limiting oxygen index (LOI) and UL-94 Burn Test.     

Calcific mitral stenosis in the hemodialysis patient

The dialysis patient is prone to elevations in the calcium phosphorus product and hyperparathyroidism, which contributes to valvular and vascular calcification. We present the case of a young lady on chronic dialysis that developed mitral calcification complicated by severe mitral stenosis, caseous calcification and retinal embolization. She subsequently required mitral valve replacement.     

Influence of high power ultrasound on physical–chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features

Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. The highest influence on the oxygen permeability in both investigated BOPP samples involved an HPUS with an amplitude of 100% during a 6 min treatment. However, BOPP samples showed different sensitivities at lower HPUS treatments. © 2017 Society of Chemical Industry