Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Clinical significance of sleep apnea disorders after implantation of a cardioverter-defibrillator in patients with cardiac disease and sustained ventricular tachyarrhythmia

The purpose of our study was to determine the prevalence of sleep related breathing disorders (SRBD) in patients with an implantable cardioverter-defibrillator (ICD) and to evaluate prospectively the possible influence of SRBD on arrhythmia recurrence and circadian arrhythmia variation as well as on cardiac mortality during long-term follow-up. Forty consecutive ICD recipients with cardiac disease and a documented history of spontaneous, life-threatening, ventricular tachyarrhythmias underwent full-night polysomnography and were followed for 2 years. In 16 of 40 patients (40%), SRBD were diagnosed (Apnea/Hypopnea Index (AHI) > 10); in 9 of these 16 patients (56%) central sleep apneas (CSA) occurred (in 8 of these 9 patients in combination with Cheyne-Stokes respiration). Seven of the 16 patients with SRBD (44%) revealed obstructive sleep apneas (OSA). AHI was 32 +/- 15 (12-60) in patients with CSA and 32 +/- 27 (11-86) in patients with OSA. Patients with and without SRBD were comparable concerning left ventricular ejection fraction, NYHA classification, cardiac disease, ICD indication, and concomitant medication. ICD registered ventricular tachyarrhythmias occurred in 10 of 24 patients (42%) without SRBD, in 4 of 9 patients (44%) with CSA, and in 3 of 7 patients (44%) with OSA. The numbers and circadian variation of episodes registered during follow-up in patients without SRBD, with OSA or CSA were comparable (14 +/- 25, median 4 vs 15 +/- 15, median 7 vs 4 +/- 5, median 2.5). The 2-year cardiac mortality was highest in patients with CSA (4/9 (44%) vs. 0/7 patients (0%) with OSA vs 3/24 patients (12.5%) without SRBD. Thus, the prevalence of SRBD in patients with chronic heart failure and a history of malignant ventricular tachyarrhythmias is high (40%) and the occurrence of CSA seems to be predictive for cardiac mortality in these patients. An influence of moderate SRBD on arrhythmia recurrence and circadian variation of spontaneous sustained tachyarrhythmic events could not be demonstrated.     

Application of thermally stimulated discharge techniques to a-Se: Te/Se double-layer photoreceptors

Interface traps in a-Se:Te/Se double-layer xerographic photoreceptors were studied using thermally stimulated discharge (TSD) techniques. Two peaks are found in the TSD current curve which are believed to be due to two distinctly different types of space charge polarization. The well-defined low-temperature peak is centred at approximately –8 °C and it is due to the difference in the dielectric constants and electrical conductivities of a-Se:Te and a-Se layers. It is argued that on the application of an electric field with positive polarity applied to the a-Se:Te layer, the Maxwell-Wagner effect causes the build up of a positive (holes) space charge layer at the interface of the two layers. The observed TSD current peak seems to be dominated by the neutralization currents in the a-Se:Te layer. The broad high-temperature peak occurs between 30 and 50 °C in the thermograms and it is believed to be due to release of holes from the deep traps at the interface between the two layers. The density of these traps is estimated to be 10¹⁰ cm^–3. The activation energy relaxation corresponds to the effective energy for the detrapping of holes from the interface states and is calculated to be 0.54 eV.     

Kinematical transformations in amorphous selenium alloys used in xerography

Differential scanning calorimetric (DSC) studies were carried out on xerographic photoreceptor materials of amorphous selenium (a-Se), a-Se_1&#x2203-xTe_x and a-Se:0.5 wt% As alloys with various amounts of chlorine doping. Glass transformation kinetics of bulk and vapour-deposited film samples were essentially identical indicating a similar amorphous structure for both forms. The glass transition temperature,T _g, in the a-Se_1&#x2203-xTe_xsystem was found to increase monotonically with the tellurium content up to 13 wt% which was accompanied by a fall in the activation energy,E _gl, for the structural relaxation. 0.5wt% As increasedT _g, whereas chlorine doping in the amounts used (100 ppm) had no effect onT _g. Crystallization exotherms were analysed using the Kissinger method which was shown to remain a valid analysis by integrating the fundamental Kolmogoroff equation describing crystallization transformations by nucleation and growth. The signifiance of the activation energy,E _A, and the frequency factor,C ₀, in the Kissinger analysis is discussed and used in interpreting the different crystallization behaviour exhibited by the various alloys. The apparent activation energy,E _A, of the crystallization kinetics was found to fall with the temperature range accessed in the DSC experiment. When other authors' previous crystallization studies by other methods were also considered, then 1/E _A was found to fall nearly linearly with the mean reciprocal temperature, 1/T, used in the experiment. It is argued that this behaviour arises if the crystal growth rate scales with the inverse viscosity of the melt and the latter is described by a Vogel-Tammann-Fulcher type of behaviour. The additives tellurium and arsenic retard the crystallization essentially by increasing the viscosity. Chlorine doping was also found to have an inhibitory effect but due probably to a change in the nucleation kinetics, rather than a viscosity rise.     

Influence of high power ultrasound on physical–chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features

Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. The highest influence on the oxygen permeability in both investigated BOPP samples involved an HPUS with an amplitude of 100% during a 6 min treatment. However, BOPP samples showed different sensitivities at lower HPUS treatments. © 2017 Society of Chemical Industry     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Morphological Study of Products Containing β-Cyclodextrin

β-Cyclodextrin (β-CD) has been applied in various fields of drug formulation. Its presence in powder Paracetamol (PAR) products prepared with different methods (kneading and spray drying) changes the morphology of original drug. The product made by spray drying has nearly isodimensional spherical particles, and potentially better flowability than the kneaded product. Spray drying of PAR product without β-CD shows similar morphology like a product with β-CD, but the particles show a greater inclination to adhesion. The results were obtained by electron microscopic study.     

Xerographic properties of a-Se:Te photoconductors

It is shown that the dark decay of the electrostatic surface potential on a corona-charged a-Se:Te alloy photoreceptor occurs via electric field-enhanced xerographic depletion discharge (FEXDD) in which Poole-Frenkel-assisted thermal emission of holes from deep mobility-gap states and their subsequent sweep out generates a negative bulk space charge. The theoretical model development is applied to explain the observed experimental dark discharge data over a wide range of charging (initial) voltages. It is shown that although the time required for the surface potential to decay to its half value t_1/2 initially increases with the charging voltage V₀ at the highest charging voltage, t_1/2 actually decreases with V₀. Results obtained from cycled-up xerographic experiments on single and double-layer photoreceptors are also reviewed and discussed in conjunction with transient photoconductivity experiments     

Metal complexation of thiacrown ether macrocycles by electrospray ionization mass spectrometry

In the present study, electrospray ionization mass spectrometry is used to evaluate the metal-binding selectivities of an array of novel caged macrocycles for mercury(II), lead(II), cadmium(II), and zinc(II) ions. In homogeneous methanol/chloroform solutions as well as extractions of metals from aqueous solution by macrocycles in chloroform, it is found that the type of heteroatom (S, O, N), cavity size, and presence of other substituents influence the metal selectivities. Several of the macrocycles in this study bind mercury ion very selectively and efficiently in the presence of many other metal ions and have an avidity toward mercury that was tunable by the size and combination of heteroatoms in the macrocycle ring and the number of cage groups attached. The extraction mechanism was further investigated by determining the variation in extraction selectivity as a function of the counterions of the mercury salts.