Recycling of multilayer packaging using a reversible cross-linking adhesive

Plastic-based multilayer packaging has an important function on the packaging market, but is currently not recyclable as the polymer layers used are usually thermodynamically immiscible. This work therefore follows the approach to prepare separable multilayer packaging using a packaging adhesive modified with thermally unstable adducts, and proposes a corresponding recycling process. For this purpose, typical multilayer structures (polyethylene (PE)// polyethylene terephtalate (PET), PET//aluminum, and PE//aluminum) were prepared by curing furan-/maleimide-functionalized polyurethane (PU)-prepolymers with a three-functional cross-linking agent. Adhesions of up to over 3N per 15 mm test specimen were measured or substrate failures of PET films were observed. However, heating in dimethylsulfoxide, the retro-Diels–Alder reaction takes place and the cross-linked adhesive turns thermoplastic and dissolves in the solvent. Thus, the laminate separates and the pure PE, PET, and aluminum foils can be recovered without any PU residue.     

Guidelines for the diagnosis and outpatient management of diabetic peripheral neuropathy

AIMS: This series analyses the results of conservative surgery for large lower pole breast cancers by lumpectomy associated with a bilateral remodelling mammoplasty, in order to avoid residual deformities. METHODS: This retrospective study concerns 50 patients with a lower pole breast cancer treated between 1986 and 1996 by lumpectomy, mammoplasty and irradiation. The contralateral breast was immediately made symmetrical in all cases. The mean tumour size was 32.5 mm. RESULTS: The mean weight of the lumpectomy specimen was 270 g. Resection margins were tumour-free in 90% of cases. The main complication observed was delayed healing, thus postponing post-operative treatment in 6.5% of cases. The median follow-up was 48 months. The 5-year actuarial ipsilateral local recurrence rate was 7% and 5-year actuarial metastasis-free and overall survival rates were 81 and 97%, respectively. Cosmesis was satisfactory in 85% of patients. We observed better results when radiotherapy was performed after rather than prior to surgery (92 vs. 67%: NS). CONCLUSIONS: Performing a bilateral mammoplasty at the time of initial surgery for large breast cancers situated in the lower quadrants of the breast facilitates larger lumpectomies with good cosmetic results.     

The 1987-8 Taulbee Survey report

This report describes the results of a survey completed in December 1988 on the production and employment of PhDs and faculty in PhD-granting computer science/engineering departments during the 1987-8 academic year. All 127 computer science (CS) departments (115 US and 12 Canadian) participated. In addition, 34 departments offering the PhD in computer engineering (CE) were included. Throughout the report. CE statistics are reported separately so that comparisons with previous years can be made for CS. The intent is to merge all statistics for CS and CE after several years     

Role Models for Radical Innovations in Times of Open Innovation

In this paper, we study the influence of innovator roles in highly innovative ventures. In order to obtain a differentiated picture we take into account the degree of innovativeness as a moderating variable. To test our hypotheses we use a sample of 146 highly innovative new product development projects. We choose a rigorous sampling design and apply state‐of‐the‐art measures for the degree of innovativeness. Furthermore, we apply multi‐trait‐multi‐method methodology (MTMM) to enhance the validity of our study. The results show that innovator roles have a strong influence on innovation success but these influences are positively and negatively moderated by innovativeness. The moderating influences depend on the type of innovativeness. Remarkably, with increasing technological innovativeness innovator roles which create inter‐organizational links with the outside world appear to be more important than intra‐organizational linker roles, and support from high‐ranked organizational members turns out to have a significant negative effect on project success with higher degrees of technological innovativeness. Possible explanations for these findings are discussed and consequences for innovation research and innovation management are shown.     

Plumbagin,a Biomolecule with (Anti)Osteoclastic Properties

Plumbagin is a plant-derived naphthoquinone that is widely used in traditional Asian medicine due to its anti-inflammatory and anti-microbial properties. Additionally, plumbagin is cytotoxic for cancer cells due to its ability to trigger reactive oxygen species (ROS) formation and subsequent apoptosis. Since it was reported that plumbagin may inhibit the differentiation of bone resorbing osteoclasts in cancer-related models, we wanted to elucidate whether plumbagin interferes with cytokine-induced osteoclastogenesis. Using C57BL/6 mice, we unexpectedly found that plumbagin treatment enhanced osteoclast formation and that this effect was most pronounced when cells were pre-treated for 24 h with plumbagin before subsequent M-CSF/RANKL stimulation. Plumbagin caused a fast induction of NFATc1 signalling and mTOR-dependent activation of p70S6 kinase which resulted in the initiation of protein translation. In line with this finding, we observed an increase in RANK surface expression after Plumbagin stimulation that enhanced the responsiveness for subsequent RANKL treatment. However, in Balb/c mice and Balb/c-derived RAW264.7 macrophages, these findings could not be corroborated and osteoclastogenesis was inhibited. Our results suggest that the effects of plumbagin depend on the model system used and can therefore either trigger or inhibit osteoclast formation.     

Chirality of 5,11-dimethylheptadecane,the major sex pheromone component of the hemlock looper,Lambdina fiscellaria (Lepidoptera: Geometridae)

Of the four possible stereoisomers of 5,11-dimethylheptadecane, the major sex pheromone component of the eastern hemlock looper (EHL),Lambdina fiscellaria fiscellaria Guen., and the western hemlock looper (WHL),Lambdina fiscellaria lugubrosa Hulst, (5R,11S)-5,11-dimethylheptadecane was the only stereoisomer eliciting electrophysiological responses by male EHL and WHL antennae. In field bioassays with EHL and WHL populations, traps baited with (5R,11S)-5, 11-dimethylheptadecane caught as many males as did traps baited with all four stereoisomers combined or a synthetic mixture of 5,11-dimethylheptadecanes. Catches in traps baited with the other three stereoisomers did not significantly differ from those in the unbaited control traps. We conclude that male antennae lack chemoreceptors for the other three stereoisomers of 5,11-dimethylheptadecane and hypothesize that only (5R,115)-5,11-dimethylheptadecane is produced by female EHLs and WHLs.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Characterisation of the adsorption sites of hydrogen on Pt/C fuel cell catalysts

A key component of a hydrogen fuel cell is a catalyst to dissociate dihydrogen to hydrogen atoms. In the present study, the adsorption of hydrogen on Pt/C fuel cell catalysts has been investigated by inelastic neutron scattering spectroscopy.

Monitoring a clean Pt(50%)/C catalyst with low energy neutron spectroscopy, after exposure to dihydrogen at 20 K, as it was heated to room temperature, showed three distinct temperature regimes: (i) a decrease in intensity from 10 to 60 K, (ii) a rise to a maximum between 60 and 120 K and then (iii) a slow fall-off towards room temperature. We assign the three regions as: (i) desorption of physisorbed dihydrogen, (ii) dissociation of dihydrogen to give an adsorbed layer and (iii) damping of the response by an increasing Debye–Waller factor.

The vibrational INS spectra of a series of Pt/C catalysts prepared under varying conditions were similar indicating that the same types of site are common to all the catalysts, although the relative proportions of each site are sample dependent. Features at 520, 950 and part of the intensity at 1300 cm⁻¹ are assigned to hydrogen on (1 1 1) faces, in good agreement with single crystal data. The mode at 640 cm⁻¹ is assigned as the doubly degenerate asymmetric stretch of Pt(1 0 0) faces with the symmetric stretch near 550 cm⁻¹.

We assign the bending mode of the on-top site to the feature at 470 cm⁻¹. The Pt–H stretch mode was observed at 2079 cm⁻¹. This is a significant result: this is the first time that hydrogen on the on-top sites has been observed on nanosized platinum particles supported on high surface area carbon black. The width of the INS peak is surprisingly large and may give additional information on the type and relative proportions of the crystallographic faces present on the catalyst particles.