Static-state feedback control of discrete-event systems underpartial observation

Studies static-state feedback control of discrete-event systems under partial observation. The authors present a necessary and sufficient condition for the existence of a static-state feedback controller. A static controller is a special case of a dynamic controller studied by Kumar et al. The authors' condition, however, has computational advantage in contrast to those obtained by Kumar et al. The authors also present a necessary and sufficient condition under which the modular feedback synthesis is possible     

Containerless solidification of highly undercooled mullite melts: Crystal growth behavior and microstructure formation

A mullite (3Al₂O₃·2SiO₂) sample has been levitated and undercooled in an aero-acoustic levitator, so as to investigate the solidification behavior in a containerless condition. Crystal-growth velocities are measured as a function of melt undercoolings, which increase slowly with melt undercoolings up to 380 K and then increase quickly when undercoolings exceed 400 K. In order to elucidate the crystal growth and solidification behavior, the relationship of melt viscosities as a function of melt undercoolings is established on the basis of the fact that molten mullite melts are fragile, from which the atomic diffusivity is calculated via the Einstein-Stokes equation. The interface kinetics is analyzed when considering atomic diffusivities. The crystal-growth velocity vs melt undercooling is calculated based on the classical rate theory. Interestingly, two different microstructures are observed; one exhibits a straight, faceted rod without any branching with melt undercoolings up to 400 K, and the other is a feathery faceted dendrite when undercoolings exceed 400 K. The formation of these morphologies is discussed, taking into account the contributions of constitutional and kinetic undercoolings at different bulk undercoolings.     

Tunable laser for sensing atmospheric transmission in the infrared region of 11 ∼ 16 µm

We succeeded in observing the continuously tunable, pulsed InSb SFR (Spin-Flip Raman) laser emission in the infrared region of 11～16µm (11.4～16.3µm) from only one InSb device, merely by adjusting the pumping wavelength (11 lines from the infrared NH₃ laser) and the applied magnetic field (0～80 kGauss).     

Permeation of Zidovudine and Probenecid from Oily Bases Containing Alcohols Through Rat Skin

Permeation of zidovudine (3'-azido-3'-deoxythymidine, AZT) and probenecid from oily bases containing an alcohol through rat skin was examined. Isopropyl myristate (IPM), as an oily vehicle, showed a penetration enhancing effect for AZT and probenecid. Ethanol, n-propanol, and n-butanol were used as additives in IPM and were examined for their own permeation and the enhancing effect on the permeation of AZT and probenecid. The skin permeation of AZT and probenecid from IPM was enhanced by addition of the alcohol in IPM. The degree of the enhancement was decreased with increasing lipophilicity of the alcohol used. me permeation rate of the drug from those systems was shown to be governed by penetration-enhancing effects of the oily base and alcohol, and the penetration of the alcohol itself through the skin.     

An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model

In order to study water-gas transport processes in the gas-diffusion-layer (GDL) of a proton exchange membrane (PEM) fuel cell system, a multiphase, multiple-relaxation-time lattice Boltzmann model is presented in this work. The model is based on the mean-field diffuse interface theory and can handle the multiphase flows with large density ratios and various viscosities. By using the standard bounce back boundary condition and an approximate average scheme for the non-slip and wetting boundary walls, respectively, detailed liquid-gas transportation in the GDL, in which exact boundary condition is difficult to be implemented, can be simulated. Unlike most of lattice Boltzmann methods based on the Bhatnagar–Gross–Krook collision operator, the present model shows a viscosity-independent velocity field, which is very important in simulating multiphase flows where various viscosities coexist. We validate our model by simulating a static droplet on a wetting wall and compare with theoretical predictions. Then, we simulate a water-gas flow in the GDL of a PEM fuel cell and investigate the saturation-dependent transport properties under different conditions. The results are shown to be qualitatively consistent with the previous numerical and theoretical works.     

Synthesis of maximally permissive and robust supervisors forprefix-closed language specifications

J.E.R. Cury and B.H. Krogh (1999) have formulated a robust supervisory control problem to synthesize a supervisor for the nominal plant which maximizes robustness. They have solved the problem by unnecessarily restricting the upper bound of the legal behavior. We show that the problem can be solved without restricting the upper bound of the legal behavior when the specification is described by prefix-closed languages. We synthesize a maximally permissive supervisor for the nominal plant which maximizes not only robustness, but also permissiveness for the maximal set of admissible plant variations     

Development of enhanced depth-resolution technique for shallow dopant profiles

A rapid shrinkage in the minimum feature size of integrated circuits requires analysis of dopants in their shallow source–drain and their extensions with an enhanced depth resolution. Rutherford backscattering spectroscopy (RBS) combining a medium-energy He ion beam with a detector of improved energy resolution should meet the requirement of a depth resolution better than 5 nm at a depth of 10–20 nm in the next 10 years. A toroidal electrostatic analyzer of 4×10⁻³ energy resolution has been used to detect the scattered ions of a medium-energy He ion beam. Five keV As⁺ implanted Si or SiO₂ samples were measured. Depth profiling results using the above technique are compared with those of glancing-angle RBS by MeV energy He ions. Limitations in the energy resolution due to various energy-spread contributions have been clarified.     

High Mechanical Strength Double‐Network Hydrogel with Bacterial Cellulose

Double‐network (DN) hydrogels with high mechanical strength have been synthesized using the natural polymers bacterial cellulose (BC) and gelatin. As‐prepared BC contains 90 % water that can easily be squeezed out, with no more recovery in its swelling property. Gelatin gel is brittle and is easily broken into fragments under a modest compression. In contrast, the fracture strength and elastic modulus of a BC–gelatin DN gel under compressive stress are on the order of megapascals, which are several orders of magnitude higher than those of gelatin gel, and almost equivalent to those of articular cartilage. A similar enhancement in the mechanical strength was also observed for the combination of BC with polysaccharides, such as sodium alginate, gellan gum, and ι‐carrageenan.     

Safety evaluation on the depressurization accident in the gas turbine high temperature reactor (GTHTR300)

Japan Atomic Energy Agency has been developing a gas turbine high temperature reactor (GTHTR300) with electric power of approximately 300 MW. One of the unique safety design concepts of this system is that events with frequency of occurrence of higher than 10⁻⁸/reactor-year are evaluated as design basis events in order to show that the frequency of large amount of FP release is less than 10⁻⁸/reactor-year. According to this concept, a depressurization accident by a large break of helium piping is postulated as a design basis event. This accident is one of the most serious accidents in the high-temperature gas-cooled reactors from the viewpoint of loss of coolability. The safety evaluation on the accident was conducted based on the actual design of the system. The short-term and long-term behaviors of fuel temperature after occurrence of the accident, internal pressure of the reactor building, oxidation behavior of fuels and graphite structures were evaluated and exposure dose of general public was also estimated using the results of evaluation of fuel temperature and fuel failure by oxidation. All of the evaluation results meet the safety criteria and feasibility of the GTHTR300 was shown by this study.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.