Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

AFM observation of polyethylene single crystals: selective handedness of screw dislocations in a chair type

The three-dimensional morphology of polyethylene single crystals grown from dilute solution has been examined by atomic force microscopy. Single crystals were deposited on a soft ground of aqueous solution of poly(vinyl alcohol) (PVA) to avoid the collapse of thin lamellar crystals with thickness of 10 nm. The observation of single crystals on dried PVA clarifies the morphology of a chair type crystal as well as well-known hollow pyramidal type. It has been confirmed that the screw dislocations in the chair type follow a selection rule of the handedness in a manner to relieve the distortion in the chair type.     

Lateral habits ofn-alkane single crystals

The lateral crystal habits ofn-alkanes (n-C _n H_2n+2) have been observed just below the melting points by optical microscopy forn=18, 19, 20, 22, 24, 34, 44, 50 and 65. The shape of the crystals depends on the crystal phase: circular in the rotator phase, lenticular in phase C, and diamond in the low-temperature phase. The rounding of the lateral shape can be explained in terms of thermal roughening of the lateral faces in the disordered phases at high temperature.     

Integrated-optic device for a fibre laser Doppler velocimeter

We first demonstrate an integrated-optic device for a fibre laser Doppler velocimeter, which consists of a waveguide interferometer and a frequency shifter in z-propagation Ti-diffused LiNbO3. The device is also pigtailed with a single-mode fibre to pick up a Doppler-shifted signal. Using the fabricated device, the velocity of a moving object was successfully heterodyne-detected with a signal/noise ratio of 30dB.     

A novel therapeutic approach for rectal varices: a case report of rectal varices treated with double balloon-occluded embolotherapy

We present a patient with continuous melena, diagnosed as rectal varices bleeding. She had a history of esophageal varices, which was treated by endoscopic ligation therapy. Eight years after the treatment of esophageal varices, the continuous melena began. Colonoscopic examination showed that the melena was caused by rectal varices, which were so severe that they could not be treated by either endoscopic sclerotherapy or surgical devascularization. Taking into considering the overall risk of treating rectal varices, we chose the approach of double balloon-occluded embolotherapy (DBOE) with 5% ethanolamine oleate with iopamodol as a liquid embolic material. DBOE is one of the interventional radiology techniques (Morita et al., Acta Hepatol Jpn 1994;35:109-120), but in this case was a completely new and novel clinical procedure for rectal varices. After the DBOE therapy, the condition of rectal varices was markedly improved. Thus, DBOE might be a new tool for treating inoperable rectal varices.     

Superplastic behaviour of Ti-48at.%Al two-phase titanium aluminide compacts made from mechanically alloyed powder

An HIP compact of MA-processed powder having a nominal composition of Ti-48at.% Al was produced. The compact consisted of a large amount of TiAl(λ) and a small amount of Ti₃Al (₂), in a completely ultra-fine equiaxed grain structure. This two-phase compact showed typical superplastic deformation behaviour. A maximum elongation of 550% was obtained. A strain exponent, n = 2, and grain size exponent, p = 2, were determined from the results of a strain-rate-change test and a creep test at constant initial stress using samples having various grain sizes, respectively. The activation energy for creep, Q_c at constant stress was calculated to be 350 kJ/mole. It is concluded that the superplastic deformation mechanism of the material under study is grain boundary sliding controlled by lattice diffusion in the TiAl phase.     

GBLT-VG for High User Densities by User Group Behavior and Hot Point in MMO Virtual Environment

Massively Multiplayer Online (MMO) games have large-scale virtual environments. Here, we propose a load distribution technique called the Group Based Load-distribution Technique with Virtual Group (GBLT-VG) that utilizes Peer-to-Peer (P2P) communication to maintain scalability under high user density conditions in MMO virtual environments. A common problem of P2P virtual environments is that user group behavior frequently generates high user density conditions. Existing techniques to manage the virtual environment cannot maintain performance in such high user density situations. The proposed technique, GBLT-VG, reduces area management loads of manager peers by introducing a new manager who manages a user neighbor group. GBLT-VG forms the user neighbor group efficiently by using party function under high user density conditions caused by users?? cooperative behaviors. In addition, GBLT-VG reduce the management load by using a virtual group when a number of parties is small, thereby decreasing the existing managers?? loads dynamically. This paper also presents simulation results demonstrating how GBLT-VG can reduce the average number of users managed by the server.