Numerical analysis of short-circuit safe operating area forp-channel and n-channel IGBTs

The mechanisms of destructive failure of an insulated gate bipolar transistor (IGBT) at short-circuit state are discussed. Results from two-dimensional numerical simulation of p-channel and n-channel IGBTs are presented. It is found that there are two types of destructive failure mechanisms: a secondary breakdown and a latchup. Which type is dominant in p-channel and n-channel IGBTs depends on an absolute value of forward voltage |V_CE|. At moderately low |V _CE|, the p-channel IGBT is destroyed by secondary breakdown, and the n-channel IGBT, by latchup. This is due to the difference of a type of flowing carrier crossing a base-collector junction of wide base transistor and ionization rates of electrons and holes     

An application of rapid freezing,freeze substitution–fixation for scanning electron microscopy

A combined technique of the rapid freezing, freeze substitution–fixation method and the osmium–DMSO-osmium method was devised. By this combined method we clearly observed the architecture of intracellular components in three dimensions. Morphological characteristics were generally similar to those of tissue prepared by the osmium–DMSO-osmium method but different in some respects. Mucigen droplets in intestinal goblet cells, for example, appeared as separated spheres, while in specimens prepared by chemical fixation they were observed as a mass of fused droplets. In the Golgi complex, all cisternae were extremely flat, although they usually dilated on the cis side after chemical fixation. Particles on the mitochondrial tubules of liver cells were well distinguished. They were mushroom shaped, as are those observed by negative staining. The combined method, that is, the rapid freezing, osmium–DMSO-osmium method, is thought to be effective for studying the true structure of intracellular components by scanning electron microscopy.     

Improving Software Development through Three Stages

In three stages covering 12 years and 16 projects, a software development group worked on attaining visible schedule control and usable software design documentation. The first stage identified two major problems: unstable code and schedule delays. The group used code inspection to address the immediate issue of code construction. In the second stage, the group formulated and implemented a software development process that addressed the entire software development life cycle. The third stage improved that process. The major factor in process improvement was the group's willingness to identify its mistakes and problems.     

Factors regulating SCC antigen expression in squamous cell carcinoma of the uterine cervix

Expression of squamous cell carcinoma (SCC) antigen emerged concurrently with squamous formation of the uterine cervix and increased during the neoplastic transformation of the cervical squamous epithelium. SCC antigen expression differed considerably among the histomorphologic cell types of cervical carcinoma. Large cell nonkeratinizing carcinoma contained high levels of the antigen. In contrast, no appreciable expression of SCC antigen was observed in small cell nonkeratinizing carcinoma. The pattern of SCC antigen expression closely coincided with EGF receptor (EGF-R) expression in cervical squamous neoplasia. This suggests that the expression of SCC and EGF-R in cervical carcinoma is related to the differentiation or dedifferentiation processes of the tumor cells. SCC production by CaSki cervical epidermoid carcinoma cells was stimulated by EGF. It seems likely that an autocrine system, in which EGF serves as the signal, may exist in cervical squamous carcinoma. 17beta-estradiol and L-triiodothyronine were found to upregulate EGF-R expression, proliferative potential and SCC production in the CaSki cervical carcinoma cells.     

Preparation of fine particles of carnegieite by a mist decomposition method

A mist of a hydrosol consisting of silica, alumina/NaAlO₂ and sodium hydroxide was produced by a supersonic atomization, and treated successively in three furnaces of different temperatures. The temperatures of the furnaces were adjusted for the evaporation of water, the dehydration and the crystallization of the mixed oxide, respectively. The spherical particles ( 0.5m) of carnegieite were found to be formed in a narrow composition range of the raw materials at temperatures of 650 to 900° C. The factors affecting the properties of the particles were investigated.     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

Syngas production from methane reforming with CO2/H2O and O2 over NiO–MgO solid solution catalyst in fluidized bed reactors

Catalyst performance of NiO–MgO solid solution catalysts for methane reforming with CO₂ and H₂O in the presence of oxygen using fluidized and fixed bed reactors under atmospheric and pressurized conditions was investigated. Especially, methane and CO₂ conversion in the fluidized bed reactor in methane reforming with CO₂ and O₂ was higher than those in the fixed bed reactor over Ni_0.15Mg_0.85O catalyst under 1.0 MPa. In contrast, conversion levels in the fluidized and fixed bed reactor were almost the same over MgO-supported Ni and Pt catalysts. It is suggested that the promoting effect of catalyst fluidization on the activity is related to the catalyst reducibility. On a catalyst with suitable reducibility, the oxidized and deactivated catalyst can be reduced with the produced syngas and the reforming activity regenerates in the fluidized bed reactor during the catalyst fluidization. In addition, the catalyst fluidization inhibited the carbon deposition.     

Syngas production by biomass gasification using Rh/CeO2/SiO2 catalysts and fluidized bed reactor

We have been developed novel catalysts for gasification of biomass with much higher energy efficiency than conventional methods (non-catalyst, dolomite, commercial steam reforming Ni catalyst). From the result of the gasification of cellulose over novel Rh/CeO₂/SiO₂ catalysts, it is found that the gasification process consists of the reforming of tar and the combustion of solid carbon. We also tested novel Rh/CeO₂/SiO₂ in the gasification with air, pyrogasification, and steam reforming of cedar wood. As a result, Rh/CeO₂/SiO₂ gave higher yield of syngas than the conventional steam reforming Ni catalyst. Furthermore, we compared the performance between single and dual bed reactors. Single bed reactor was effective in the gasification of cedar, however, it was not suitable for the gasification of rice straw since a rapid deactivation was observed. Gasification of rice straw, jute stick, baggase using the fluidized dual-bed reactor and Rh/CeO₂/SiO₂ was also investigated. Especially, the catalyst stability in the gasification of rice straw clearly was enhanced by using the fluidized dual bed reactor.     

Capacitance behavior of activated carbon fibers with oxygen-plasma treatment

Modified activated carbon fibers (ACFs) were used as the electrodes of an electric double-layer capacitor and showed an enhanced capacitance effect after a RF-plasma treatment. The capacitance and the surface functional groups of the ACFs were studied. For the plasma-treated ACFs having a specific surface area of 1500 m² g⁻¹, the capacitance increased by 28% compared to the untreated sample and the highest electric capacitance value of 142 F g⁻¹ was achieved with an oxygen feed concentration of 10 vol.%. The Brunauer-Emmett-Teller (BET) surface area was 2103 m² g⁻¹, which was 34% higher than that of the untreated sample. The pore volume was similarly increased to 483.1 cm³ g⁻¹ STP, and from the pore distribution plot, quantities of mesopores of 10 nm or less and micropores also increased. However, in order to enhance the capacitance, the quinone functional group had a significant influence in addition to the BET surface area. The correlation between the capacitance and the number of quinone functional groups was confirmed because quinone is an electron acceptor.