Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

A personal computer based system used in electromyography for interpretation and reporting

Programs for rule based electromyography (EMG) interpretation and reporting are described. A number of parameters are obtained during an EMG investigation. The combination of these data leads to a neurophysiological conclusion. Knowledge from the literature, research and experience is the basis for rule development. Rules have been developed for 14 of the most commonly used classifications of an EMG. The syntax is relatively easy and the user may change the rules, add rules or apply the system for other types of data. The results are displayed in a new graphical way. The system presented here is part of an integrated EMG laboratory with administrative routines, distributed databases for storage of results and routines for automatic report generation.     

Boron removal by titanium addition in solidification refining of silicon with Si-Al melt

In order to effectively remove B from Si for its use in solar cells, a process involving B removal by solidification refining of Si using a Si-Al melt with Ti addition was investigated. For clarifying the effect of Ti addition on B removal from the Si-Al melt, TiB₂ solubilities in Si-64.6 at. pct Al melt at 1173 K and Si-60.0 at. pct Al melt at 1273 K were determined by measuring the equilibrium concentrations of B and Ti in the presence of TiB₂ precipitates. The small solubilities of TiB₂ in the Si-Al melt indicate the effective removal of B from the Si-Al melt by Ti addition. Further, solidification experiments of Si-Al alloys containing B by Ti addition were performed, and the effect of Ti addition on the solidification refining of Si with the Si-Al melt was successfully confirmed.     

Genetically engineered brain drug delivery vectors: cloning, expression and in vivo application of an anti-transferrin receptor single chain antibodystreptavidin fusion gene and protein

A single chain Fv antibody–streptavidin fusion proteinwas expressed and purified from bacterial inclusion bodies followingcloning of the genes encoding the variable region of the heavychain and light chain of the murine OX26 monoclonal antibodyto the rat transferrin receptor. The latter undergoes receptormediated transcytosis through the brain capillary endothelialwall in vivo, which makes up the blood–brain barrier (BBB);therefore, the OX26 monoclonal antibody and its single chainFv analog may act as brain drug delivery vectors in vivo. Attachmentof biotinylated drugs to the antibody vector is facilitatedby production of the streptavidin fusion protein. The bi-functionalityof the OX26 single chain Fv antibody–streptavidin fusionprotein was retained, as the product both bound biotin and therat transferrin receptor in vitro and in vivo, based on pharmacokineticand brain uptake analyses in anesthetized rats. The attachmentof biotin–polyethyleneglycol–fluorescein to theOX26 single chain Fv antibody–streptavidin fusion proteinresulted in illumination of isolated rat brain capillaries inconfocal fluorescent microscopy. In conclusion, these studiesdemonstrate that genetically engineered single chain Fv antibody–streptavidinfusion proteins may be used for non-invasive neurotherapeuticdelivery to the brain using endogenous BBB transport systemssuch as the transferrin receptor.     

Effect of Ultrasonication on the Microstructure and Tensile Elongation of Zirconia-Dispersed Alumina Ceramics Prepared by Colloidal Processing

To obtain dense, fine-grained ceramics, fine particles and advanced powder processing, such as colloidal processing, are needed. Al₂O₃ and ZrO₂ particles are dispersed in colloidal suspensions by electrosteric repulsion because of polyelectrolyte absorbed on their surfaces. However, additional redispersion treatment such as ultrasonication is required to obtain dispersed suspensions because fine particles tend to agglomerate. The results demonstrate that ultrasonication is effective in improving particle dispersion in suspensions and producing a homogeneous fine microstructure of sintered materials. Superplastic tensile ductility is improved by ultrasonication in preparing suspensions because of the dense and homogeneous fine microstructure.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Effect of stress wave shape on the crack propagation velocity in cyclic delayed failure

Crack propagation velocity in delayed failure under superposed repeating load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{R}}$, was compared with that under static load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$Two peaks appear on the relation between decreasing rate of crack propagation velocity, $\text{1-β = 1 ? (}\text{d}\text{a/}\text{d}\text{t))}{}_{\mathrm{R}}\text{/(}\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$ and frequency, ?, both under sinusoidal and square load. By changing the ratio of holding time at maximum stress intensity factor to that at minimum stress intensity factor in square load, it was deduced that the existence of two peaks on the 1 ? β vs $\text{f}$ curve was caused by an asymmetric interaction between hydrogen atoms and cyclic moving of the position with triaxial tensile stress at crack tip. Moreover, the relation between 1 ? β and $\text{f}$ under the positive or negative saw tooth load could be well explained by the interaction model.     

Promotive effect of isopentane on cyclohexane isomerization catalyzed by sulfated zirconia

Cyclohexane isomerization to methylcyclopentane over sulfated zirconia is markedly enhanced in the presence of isopentane which acts as a hydride transfer agent to facilitate the slow step of hydride transfer from cyclohexane to isopropyl cation. This was revealed by deuterium tracer studies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effects of heating rate on microstructure and transparency of spark-plasma-sintered alumina

Commercial alumina powder was densified by spark plasma sintering (SPS) at 1150 °C. During SPS processing, the effects of the heating rate were examined on microstructure and transparency. With decreasing heating rate, the grain size and the residual porosity decreased, while the transparency increased. At a heating rate of 2 °C/min, the grain size was 0.29 μm, and the in-line transmission was 46% for a wavelength of 640 nm. The mechanisms for the fine microstructure and low porosity at slow heating, which are conflicting with some existing results, were explained by considering the role of defect concentration and grain-boundary diffusion during densification.     

Coating of TiB2 dispersed Ti50Ni50 superelastic alloy layer onto Ti-6Al-4V alloy by spark and resistance sintering

The spark and resistance sintering (SRS) of a mixture of Ti, Ni, and TiB₂ powders was carried out to form a TiB₂ dispersed TiNi alloy layer onto a Ti-6Al-4V alloy substrate. The strength and delamination resistance of the surface layer were evaluated by three-point bending tests. The results showed that the bending strength of the specimen with the TiNi alloy surface layer without TiB₂ particles sintered at 1273 K was low because the crack initiation occurred at an early stage of loading in a thick interface layer containing brittle Ti-Ti₂Ni eutectic. By decreasing the sintering temperature to 1200 K, the bending strength increased and the crack initiation occurred from the surface because the interface layer was thin and did not contain the brittle Ti-Ti₂Ni eutectic. For the specimens with TiB₂ dispersed TiNi surface layer that was sintered at 1273 K, the bending strength was larger than that of the specimens with TiNi surface layer because the interface layer does not contain the Ti-Ti₂Ni eutectic and compressive residual stress generated in the surface layer during cooling process after SRS suppresses the crack initiation on the surface. The coating of TiB₂ dispersed TiNi alloy onto titanium alloys by SRS provides strong interface to prevent delamination of the surface layer, strong surface due to residual compressive stress, and wear-resistant surface due to the existence of hard TiB₂ particles and superelastic deformation of TiNi matrix.