Apoptosis occurs in granulosa cells but not cumulus cells in the atretic antral follicles in pig ovaries

The porcine antral follicles, 3-6 mm in diameter, were dissected from the ovaries of mature pigs, and then granulosa and cumulus cells were isolated from each follicle. In atretic follicles, high activity of neutral Ca2+/Mg2+-dependent endonuclease and DNA ladder formation, estimated by electrophoresis, were noted in granulosa cells but not in cumulus cells. Extremely low activity of the endonuclease and no DNA ladder formation were observed in both types of cells obtained from healthy follicles. Moreover, apoptotic cells were observed histochemically among granulosa cells only. A good correlation (r = 0.987) between the endonuclease activity of granulosa cells and the progesterone/estradiol ratio of follicular fluid in each follicle was found. These results suggest that apoptosis occurs in granulosa cells but not cumulus cells in the atretic antral follicles in pigs.     

Breakdown of oil films and formation of residual films

The breakdown processes of oil films under quasi-static loading have been investigated by using a newly developed steel-oil-mercury system. The relationship between the thickness and breakdown ratio of a hexadecane film is represented by a single master curve independently of the indentation speed, indentation load, and temperature. The master curve shows that the breakdown process of hexadecane includes two stages; one is the decrement of the thickness without breakdown and the other is the decrement of the thickness with a drastic progress of breakdown. By solving a small amount of fatty acid in hexadecane, the thickness increases and the breakdown ratio decreases noticeably; a multilayer residual film supporting normal load is formed between two metal surfaces. Experiments at different temperatures reveal a negative relationship between the temperature and thickness of residual film, which indicates that the residual film is organized by physical interaction rather than chemical interaction. At least under a lower concentration, the residual film appears to consist of not only fatty acid molecules but also hexadecane molecules.     

Oxyphilic cell variant of endometrioid adenocarcinoma

A case of oxyphilic cell variant of endometrioid adenocarcinoma is presented. To the best of our knowledge, there have been only three such cases reported in the English literature. The patient was a 35-year-old Japanese female (gravida 0, para 0). She was slightly obese with profuse vaginal bleeding. Histological examination of the resected uterus revealed endometrioid adenocarcinoma with an exclusive oxyphilic cell component. There was no evidence of myometrial invasion nor lymph node metastases. Reported cases of oxyphilic cell variant of endometrioid adenocarcinoma, including the present case, were stages 0-1 and grades 1-2. Although further study is necessary to evaluate this variant, oxyphilic cell variant seems to be an early stage of adenocarcinoma and should be differentiated from eosinophilic metaplasia and other types of adenocarcinoma of the endometrium.     

Gas permeation property of polyaniline films

We examined the influence of polyaniline (PAn)'s unit sequence and doping with low molecular weight dopants or polymer dopants on permeation property. It was found that CO₂ permeability was increased by the formation of a quinonediimine unit in PAn with the oxidation. CO₂ sorption amount of PAn was decreased by oxidation. The increase of CO₂ permeability with oxidation, therefore, resulted from the increase of diffusivity, which was attributable to morphological variation by the increase of a quinonediimine unit. The permselectivity of PAn films was found to be remarkably improved by doping. In particular, the selectivity value of the PAn film doped with polyvinyl sulphonic acid as a polymer dopant went up to over 2,000. This remarkable increase of selectivity was found to result in the increase of selectivity, depending on diffusivity. It was also found that the permselectivity of the PAn film doped by polymer dopants was surpassed, as compared with that doped by low molecular dopants. © 1995 John Wiley & Sons, Inc.     

Sorption and permeation of iodine in water-swollen poly(vinyl alcohol) membranes and iodine complex formation

The sorption and the permeation of iodine in water-swollen poly(vinyl alcohol) (PVA) membranes and the formation of PVA–iodine complexes were studied. The logarithms of the permeability and the diffusion coefficient decreased approximately linearly with the increase in polymer volume fraction. When the membrane was soaked in an aqueous I₂–KI solution, it contracted and Young's modulus increased. These findings were explained in terms of the formation of extra junction points due to the PVA–iodine complexes. These changes were reversible and could be recovered by replacing the solution with water. The length of the polyiodine chain increased with the increase in the degree of hydration of the membrane. At a fixed degree of hydration, Young's modulus of an iodine-sorbed membrane was much greater than that of a membrane soaked in pure water. This finding was explained on the basis of a double-network structure. The extension of the membrane promoted the complex formation, and the complex disappeared when the tension was released. The critical strain necessary for the complex formation was independent of the degree of hydration. The length of polyiodine chain increased with strain and became constant at higher strains.     

Studies on relationship between activity and electron density on carbonyl oxygen in sex pheromone mimics of the American cockroach,part XI

From the relationship between structures of the 2-substituents of verbanyl analogs and their sex pheromone activities to the American cockroach, electron density of the carbonyl oxygen atom in the substituent, as estimated by the [¹⁷O]NMR chemical shift, was estimated to be an important factor which influenced the activity, in addition to length of the substituent and the position of the carbonyl group. (+)-Verbanyl methylcarbonate (XX), possessing the highest electron density on the carbonyl oxygen atom, showed the strongest activity among the analogs.For Part X, see Manabe et al., 1983. J. Chem. Ecol. 9:533–549.     

Preparation of Silicon Carbide and Aluminum Silicon Carbide from a Montmorillonite–Polyacrylonitrile Intercalation Compound by Carbothermal Reduction

Both silicon carbide and aluminum silicon carbide have simultaneously been obtained directly from naturally occurring aluminosilicate by carbothermal reduction for the first time. A precursor of a montmorillonite–polyacrylonitrile (PAN) intercalation compound was heated at 1700°C in Ar. For comparison, montmorillonite–carbon mixtures were similarly heated. α-SiC, β-SiC, and Al₄Si₂C₅ formed from the montmorillonite–PAN intercalation compound. Mainly α-Al₄SiC₄ was obtained with ternary carbides from the montmorillonite–carbon mixtures in addition to a large amount of β-SiC. Hence, aluminum silicon carbide formation was affected by the mixing condition of the starting materials.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

A model for the complex permittivity of water at frequencies below 1 THz

Experimental permittivity data of liquid water, compiled from the open literature, were selectively applied to support a modeling strategy. Frequencies up to 1 THz and atmospheric temperatures are covered with an expression made up by two relaxation (Debye) terms. The double-Debye model reduces to one term when the high frequency limit is set at 100 GHz, and the model can be extended to 30 THz by adding two resonance (Lorentzian) terms. The scheme was carried out by employing nonlinear least-squares fitting routines to data we considered reliable.     

Interdiffusion in Co-Mn alloys

Interdiffusion coefficient in cobalt-manganese alloys has been determined by Matano's method in the temperature range between 1133 and 1423 K on (pure Co)-(Co-30.28 at. pct Mn alloy) and (pure Co)-(Co-51.76 at. pct Mn alloy) couples. This, ∼D, has been found to increase with the increase of manganese content. However, the activation energy (∼Q) and frequency factor ( ₀) show a maximum at about 10 at. pct Mn. The concentration dependence of and has been discussed taking into account the thermodynamic properties of the alloy. The difference in between the ferro- and paramagnetic phases in Co-5 at. pct Mn alloy has been found to be 24 kJ/mol, which is larger, than that for the diffusion of Mn⁵⁴ in this alloy. Further it has been found that the Kirkendall marker moves toward manganese-rich side, showing that manganese atoms diffuse faster than cobalt atoms. From the marker shift, the intrinsic diffusion coefficients,D _Co andD _Mn, at 33 at. pct Mn have been determined as follows:D _Co=0.22×10⁻⁴ exp(−263 kJ mol⁻¹/RT) m²/s, andD _Mn=0.98×10⁻⁴ exp(−229 kJ mol⁻¹/RT) m²/s.