Photocatalytic oxidation of low concentration 2,4-D solution with new TiO2 fiber catalyst in a continuous flow reactor.

Environmental pollution by low concentrations of 2,4-Dichlorophenoxyacetic acid (2,4-D) is a concern these days due to ever increasingly stringent regulations. Photocatalysis with immobilized TiO2 fiber is a promising oxidation method. Laboratory experiments on photocatalytic degradation of 0.045 mmol l(-1) 2,4-D with the world's first high-strength TiO2 fiber catalyst were carried out in a continuous flow reactor in which the degradations were, in general, similar to those with high 2,4-D concentrations investigated elsewhere. Degradation and mineralization of 2,4-D were significantly enhanced with no initial pH adjustments. The rate constants for total organic carbon (TOC) without pH adjustment were about two-fold bigger than the pH adjustment cases. CO2 gas measurement and carbon mass-balance were carried out for the first time, where about 34% organic carbon converted into CO2 gas during four-hour oxidation. 2,4-Dichlorophenol (2,4-DCP), phenol, benzyl alcohol and two unknowns (RT = 2.65 and 3.78 min.) were detected as aromatic intermediates while Phenol was the new aromatic in HPLC analysis. Dechlorination efficiencies were high (> 70%) in all the cases, and more than 90% efficiencies were observed in chloride mass balance. Bigger flow rates and solution temperature fixed at 20 degrees C without pH adjustment greatly enhanced 2,4-D mineralization. These results can be an important basis in applying the treatment method for dioxin-contaminated water and wastewater.     

Structure and Nonlinear Optical Properties of Lanthanide Borate Glasses

The third–order nonlinear optical susceptibility, χ⁽³⁾, of lanthanide (lanthanum, praseodymium, neodymium, and samarium) borate glasses has been measured by the third harmonic generation method. The structure of the present glass system has been studied by infrared and Raman spectroscopic methods. The network structures of the present Ln₂O₃–B₂O₃ glasses have been confirmed to be basically similar to each other. Praseodymium, neodymium, and samarium borate glasses exhibit χ⁽³⁾ values that are larger than lanthanum borate glasses, because of the optical resonance effect, in accordance with the f – f transition. Especially, the χ⁽³⁾ value for 30Pr₂O₃·70B₂O₃ glass is 1.8 × 10⁻¹² esu, which is a factor of ∼60 larger than that of SiO₂ glass. This striking enhancement of χ⁽³⁾ is mainly attributed to the large transition moment to the first excitation state.     

Alternative Economics and Sustainable Future: Diverse Cultures/Beliefs/Values as Indispensable Factors

This article argues for a theoretical framework of alternative economics pertinent to Sustainable Development. The alternative economics requires an appropriate belief/value system based on a dynamic, sound and holistic society-specific culture (abbreviated as “Culture”). To represent the Culture-based belief/value system, a general framework for overarching Integral Harmony is introduced as an appropriate social value system for a paradigm shift toward sustainability. Such a social value system is now related to the value premises of the alternative economics. Then, the framework of alternative economics is explained in terms of basic theoretical construct that is simplified as a summary equation comprising value and real aspects. Finally, a typical working of the alternative economics is demonstrated diagrammatically as constant interactions of the value aspect and the real aspect (abbreviated as “Value-Real Interactions”).     

Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.     

Logichart — Intelligible Program Diagram for Prolog and its Processing System

An intelligible program diagram called Logichart has been developed for Prolog visualization. Its syntax rules and layout rules are formalized in terms of an attribute graph grammar. This grammar is underlain by a context–free graph grammar whose productions are defined to formalize the graph–syntax rules of Logichart diagrams. Semantic rules attached to the productions are defined in such a way that they can extract the layout information needed to display a Logichart diagram as attributes. Our Prolog visualization system, which has been implemented based on the attribute graph grammar, can draw a Logichart diagram for any correct Prolog program (completeness), and any Logichart diagram displayed by the system is always valid for the grammar (soundness). The system can also display the execution of a Prolog program in real time; that is, the Logichart diagram is dynamically updated as the program runs.     

Electrochemical oxidation of chlorophenols at a boron-doped diamond electrode and their determination by high-performance liquid chromatography with amperometric detection

Anodically pretreated diamond electrodes have been used for the detection of chlorophenols (CPs) in environmental water samples after high-performance liquid chromatographic (HPLC) separation. The anodization of as-deposited boron-doped polycrystalline diamond thin-film electrodes has enabled the stable determination of phenols over a wide concentration range. Prior to the HPLC analysis, a comparative study with ordinary glassy carbon, as-deposited diamond, and anodized diamond was made to examine the oxidative behavior of phenols by cyclic voltammety and flow injection analysis with amperometric detection. At anodized diamond electrodes, reproducible, well-defined cyclic voltammograms were obtained even at high CP concentration (5 mM), due to a low proclivity for adsorption of the oxidation products on the surface. In addition, after prolonged use, the partially deactivated diamond could be reactivated on line by applying a highly anodic potential (2.64 Vvs SCE) for 4 min, which enabled the destruction of the electrodeposited polymer deposits. Hydroxyl radicals produced by the high applied potential, in which oxygen evolution occurs, are believed to be responsible for the oxidation of the passivating layer on the surface. When coupled with flow injection analysis (FIA), anodized diamond exhibited excellent stability, with a response variability of 2.3% (n = 100), for the oxidation of a high concentration (5 mM) of chlorophenol. In contrast, glassy carbon exhibited a response variability of 39.1%. After 100 injections, the relative peak intensity, for diamond decreased by 10%, while a drastic decrease of 70% was observed for glassy carbon. The detection limit obtained in the FIA mode for 2,4-dichlorophenol was found to be 20 nM (S/N = 3), with a linear dynamic range up to 100 microM. By coupling with the column-switching technique, which enabled on-line preconcentration (50 times), the detection limit was lowered to 0.4 nM (S/N = 3). By use of this technique, anodized diamond electrodes were demonstrated for the analysis of CPs in drainwater that was condensed from the flue gas of waste incinerators.     

An experimental study of energy dips for speech and music

Speech signals generally have many intervals with low energy “energy dips”. For music signals, energy dips are not always remarkable. We studied stochastic features of energy dips for speech and music signals. A certain difference was found between the signals in the length of energy dips. Also, the number of energy dips in a time window and their distribution were investigated. From this distribution, a threshold number of energy dips was estimated which provided a scheme for the discrimination of speech from music.     

Size reduction in crystal grains in LiNb0.5Ta0.5O3 thin films by controlling nucleation density during thermal plasma spray chemical vapor deposition

Two approaches were applied to thermal plasma spray chemical vapor deposition (TPS CVD) in order to reduce crystal grain size or/and surface roughness of LiNb_0.5Ta_0.5O₃ thin films while retaining the advantages of this method, such as high deposition rate. The first method consists of a two-step deposition, where the nucleation density is controlled in the first step and the film with high crystallinity is deposited in the second step. The surface roughness and grain size could be reduced from 1 nm to 7.7 nm, and from 200-350 nm to 120-180 nm, respectively. In the second approach, employing a one-step TPS CVD process, the conventional precursor was substituted by a double-alkoxide precursor and grain size in the deposited films could be reduced to 50-80 nm. Both approaches adopted in this work permitted to reduce the optical propagation loss.     

Size Measurement of Polystyrene Latex Particles Larger than 1 Micrometer using a Long Differential Mobility Analyzer

We describe a newly constructed annular-type differential mobility analyzer (DMA) with an effective electrode length of 60 cm, which is longer than that of our original DMA (40 cm length). This long DMA was developed to extend the classification size of particles measuring up to 1.5 μm. As an application of this DMA, the mean diameters and standard deviations were determined for six samples of monodisperse polystyrene latex (PSL) particles ranging from 0.94 to 1.27 μm in nominal diameter. These PSL particles suspended in double-distilled water were aerosolized by a glass nebulizer and then introduced into the DMA. The mean diameters and standard deviations of these PSL particles were calculated by Ehara's method and compared with the nominal diameters and uncertainties. There was good correlation between the nominal diameters of these samples—particularly for recently certified samples—and the measured diameters. Classification of aerosol particles more than 1 micrometer in diameter using this DMA will be useful for many purposes.