Behaviour of sand–clay mixtures for road pavement subgrade

Materials forming sand grains and colluvial soil deposits have a distinct structure, consisting of a composite matrix of coarse and fine soil grains. The influence of sand grains content on the behaviour of sand–clay mixtures was investigated by a series of intensive laboratory experiments. The California bearing ratio (CBR), unconfined compression strength (UCS) and compaction tests were carried out on various contents of sand and clay mixtures. The sand–clay mixtures were prepared with sand contents of 0, 10, 20, 30, 40, and 50% by weight. The laboratory tests on these mixtures have indicated that their behaviour will depend on the relative concentration of the sand and clay samples. The results of the tests showed a decrease in the UCS, and an increase the CBR values with an increase in the amount of sand. An increase in dry unit weight and a decrease in respective moisture content by an increase in the amount of sand were observed in the compaction tests.     

Eco‐friendly synthesis of silver nanoparticles and its larvicidal property against fourth instar larvae of Aedes aegypti

In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC₅₀  = 15.76 ppm and LC₉₀  = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X‐ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50–120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco‐friendly and clean synthesis route to Ag.Inspec keywords: silver, nanofabrication, X‐ray diffraction, zoology, particle size, nanoparticles, biomedical materials, nanomedicineOther keywords: time 2.5 h, size 50 nm to 120 nm, silver nanoparticle, larvicidal property, instar larvae, Aedes aegypti, larvicidal effect, larvicidal activity performance, X‐ray diffraction, nanoparticle particle size distribution, absorption maxima, silver surface plasmon resonance peak     

Contrast enhancement in atherosclerosis development in a mouse model: in vivo results at 2 Tesla

To develop an MRI method for the evaluation of contrast enhancement in early atherosclerotic plaque development in the abdominal aorta of a mouse model. Male apoE^–/– mice from three groups, respectively 4 (n = 6), 8 (n = 11) and 16 (n = 4) weeks were included. Axial T1 spin echo images of the abdominal aorta were obtained above and below the renal arteries (90 m spatial resolution) before and over 1 h after the injection of a macromolecular contrast agent. Signal enhancement was measured in the vessel wall and compared to histological features. Maximal arterial wall signal enhancement was obtained from 16 to 32 min post injection. During this time, the signal-to-noise ratio increased by a factor up to 1.7 in 16 week mice and 2.7 and 2.4 in 8 and 4 weeks mice, respectively. The enhancement of the arterial wall appeared less pronounced in the oldest mice, 16 weeks old, exhibiting more advanced lesions. Using a macromolecular gadolinium agent, contrast uptake in atherogenesis varies with lesion stage and may be related to vessel-wall permeability. Dynamic contrast-enhanced MRI may be useful to evaluate the atherosclerotic plaque activity in mice.     

The influence of lateral forces on the cell stiffness measurement by optical tweezers vertical indentation

We studied the lateral forces arising during the vertical indentation of the cell membrane by an optically trapped microbead, using back focal plane interferometry to determine force components in all directions. We analyzed the cell-microbead interaction and showed that indeed the force had also lateral components. Using the Hertz model, we calculated and compared the elastic moduli resulting from the total and vertical forces, showing that the differences are important and the total force should be considered. To confirm our results we analyzed cells from two breast cancer cell lines: MDA-MB-231 and HBL-100, known to have different cancer aggressiveness and hence stiffness.     

Graphene‐based ternary composites for supercapacitors

The research on electrode materials for supercapacitor application continues to evolve as the request of high‐energy storage system has increased globally due to the demand for energy consumption. Over the past decades, various types of carbon‐based materials have been employed as electrode materials for high‐performance supercapacitor application. Among them, graphene is 1 of the most widely used carbon‐based materials due to its excellent properties including high surface area and excellent conductivity. To exploit more of its interesting properties, graphene is tailored to produce graphene oxide and reduced graphene oxide to improve the dispersibility in water and easy to be incorporated with other materials to form binary composites or even ternary composites. Nowadays, ternary composites have attracted enormous interest as 2 materials (binary composites) cannot satisfy the requirement of the high‐performance supercapacitor. Thus, many approaches have been employed to fabricate ternary composites by combining 3 different types of electroactive materials for high‐performance supercapacitor application. This review focuses on the supercapacitive performance of graphene‐based ternary composites with different types of active materials, ie, conducting polymers, metal oxide, and other carbon‐based materials.     

The status of e‐commerce applications in Malaysia

Abstract

The main focus of this study is the status of e‐commerce usage in Malaysia, specifically five main business processes and activities, namely, marketing, advertising, customer support and service, order and delivery and payment. A total of twenty applications categorized under the five processes and activities were identified and analysed. From the twenty applications studied, communications via e‐mail was found to be the most widely used (70%). On the other hand, applications categorized under the payment category such as the smart card and prepaid card was used by only seven percent of the organisations. This demonstrated that Malaysian organisations were using e‐commerce applications. However the usage was limited. The results of the survey indicated that security issues seemed to be the main barrier to the implementation of e‐commerce. Organizations were reluctant to use e‐commerce as they felt that the transactions conducted electronically were open to hackers and viruses, which are beyond their control. They were also skeptical about the security measures that were implemented to safeguard on‐line payment transactions.     

Iron oxide supported sulfated TiO2 nanotube catalysts for NO reduction with propane

Sulfated TiO₂ nanotubes and a series of iron oxide loaded sulfated TiO₂ nanotubes catalysts with different iron oxide loadings (1 wt%, 3 wt%, 5 wt% and 7 wt%) were prepared and calcined at 400 °C. The physico-chemical properties of the catalysts were studied by using XRD, N₂-physisorption, Raman spectroscopy, SEM-EDX, TEM, XPS, and pyridine adsorption using FTIR and H₂-TPR techniques. It was observed that iron oxide was highly dispersed on the sulfated TiO₂ nanotube support due to its strong interaction. The activity of these catalysts in the catalytic removal of NO with propane was also studied in the temperature range of 300–500 °C. Highest activity (90% NO conversion) was observed with 5 wt% iron oxide supported on sulfated TiO₂ catalyst at 450 °C. Selective catalytic reduction of NO activity of the catalysts was correlated with iron oxide loading, reducibility, and the Brönsted and Lewis acid sites of the catalysts. The catalyst also showed good stability under studied reaction conditions that no deactivation was observed during the 50 h of reaction.     

Synthesis of Graphene Sheets and Characterization of Poly(3-hexylthiophene):Graphene Blends

Graphite is a bulk-layered material that can be separated into sheets which exhibit folds and pleat-like structures. Graphene sheets are easily obtained via an exfoliation process using graphite in organic solvent. Spin-coated graphene:poly(3-hexylthiophene) (P3HT) blend films are characterized by absorption and photoluminescence spectroscopy measurements. Doping of 2.5% graphene into P3HT induces better light absorption and photoluminescence quenching in the blend film. This finding indicates that graphene is a potential alternative material in various applications such as an acceptor material in organic solar cells.     

Monitoring of acrylamide carcinogen in selected heat-treated foods from Saudi Arabia

Food Science and Biotechnology - The present study reports the outcomes of assessment on acrylamide levels in selected heat-treated foods of diverse brands and origins from Saudi Arabia. In chips,...