Electrotunable Non‐reciprocal Laser Emission from a Liquid‐Crystal Photonic Device

A liquid crystal (LC) photonic device with an anisotropic optical heterojunction structure has been fabricated. The device has a phase‐retarding nematic LC (NLC) layer sandwiched between two polymer cholesteric LC films with right‐handed helices of different pitches. Electrotunable non‐reciprocal light transmittance and unidirectional circularly polarized (CP) lasing emission have been successfully demonstrated for this device structure. Two left CP (LCP) lasing emission peaks are observed at the edges of the overlapping region between the two photonic bands in the structure and are shifted upon the application of a voltage. In contrast, a non‐reciprocal right CP (RCP) lasing emission peak emerges at one of the band edges and diminishes upon the application of a voltage. These phenomena are interpreted based on the selective reflection of RCP light and the reorientation of the NLC molecules by the application of a voltage.     

The characteristics and measuring technique of refractory dissolved organic substances in urban runoff.

It is considered that refractory dissolved organic substances have caused an increase in the COD concentration in Lake Biwa in recent years. We investigated the organic matter in the first flush of stormwater runoff from a road in the watershed area of the lake, and studied the possibility of improvement in the water environment from that aspect. After percolating the stormwater through soil, we analyzed organic substances fractionated by using GPC-TC. And we examined the effect of removal of organic substances by comparing the peak height before and after percolation. In the result of the experiments, we found that soil infiltration reduced the refractory dissolved organic substance and we successfully designed a system for a simple and easy experimental facility to treat urban runoff.     

A Generic Implementation of Tree Skeletons

In data-parallel skeleton libraries, the implementation of skeletons is usually tightly-coupled with that of data structures. However, loose coupling between them like C++ STL will improve modularity and flexibility of skeletons and data structures. This flexibility is particularly valuable for tree skeletons. To achieve such loose coupling, we present an iterator-based interface of trees for tree skeletons. We have implemented tree skeletons on the basis of our interface; we present their design and implementation. This paper also reports the results of preliminary experiments.     

The result of a wall failure in-pile experiment under the EAGLE project

The WF (wall failure) test of the EAGLE program, in which 2 kg of uranium dioxide fuel-pins were melted by nuclear heating, was successfully conducted in the IGR (Impulse Graphite Reactor) of NNC/Kazakhstan. In this test, a 3 mm-thick stainless steel (SS) wall structure was placed between fuel pins and a 10 mm-thick sodium-filled channel (sodium gap). During the transient, fuel pins were heated, which led to the formation of a fuel-steel mixture pool. Under the transient nuclear heating condition, the SS wall was strongly heated by the molten pool, leading to wall failure. The time needed for fuel penetration into the sodium-filled gap was very short (less than 1 s after the pool formation). The result suggests that molten core materials formed in hypothetical LMFBR core disruptive accidents have a certain potential to destroy SS-wall boundaries early in the accident phase, thereby providing fuel escape paths from the core region. The early establishment of such fuel escape paths is regarded as a favorable characteristic in eliminating the possibility of severe re-criticality events. A preliminary interpretation on the WF test results is presented in this paper.     

Illumination control system for adaptive dynamic range control

Abstract— We have developed an illumination control system for adaptive dynamic range control. This system satisfies several performance requirements for image quality and reliability. A projection system using the illumination control system can reproduce images with optimum brightness for each image.     

Statistical interferometry based on a fully developed speckle field: an experimental demonstration with noise analysis

A novel interferometric method named statistical interferometry is proposed and studied. In the method, in contrast to the conventional deterministic interferometry, the complete randomness of the two interfering light fields, i.e., the random interference of the fully developed speckle fields, plays an essential role and is used as a standard of phase in a statistical sense. Preliminary experiments were conducted to verify the validity of the method, followed by a computer simulation. As an experimental result, the accuracy of the measurements of an out-of-plane displacement was confirmed up to lambda/800 by comparison with the heterodyne interferometer. The method has the advantage of simplicity of the optical system required, while at the same time providing high accuracy.     

Viewing angle performance of TN-LCD with hybrid aligned nematic film

We developed a novel hybrid aligned nematic film that improves viewing angle performance of twisted nematic liquid crystal display (TN-LCD). The viewing angle performance of the normally white (NW) TN-LCD with the compensation film was evaluated by both computer simulation and experiment. The compensated NW-TN-LCD exhibits wide viewing angle performance including good gray scale stability and low color shift.