Quantitative risk assessment using a Japanese hydrogen refueling station model

Although hydrogen refueling stations (HRSs) are becoming widespread across Japan and are essential for the operation of fuel cell vehicles, they present potential hazards. A large number of accidents such as explosions or fires have been reported, rendering it necessary to conduct a number of qualitative and quantitative risk assessments for HRSs. Current safety codes and technical standards related to Japanese HRSs have been established based on the results of a qualitative risk assessment and quantitative effectiveness validation of safety measures over ten years ago. In the last decade, there has been much development in the technologies of the components or facilities used in domestic HRSs and much operational experience as well as knowledge to use hydrogen in HRSs safely have been gained through years of commercial operation. The purpose of the present study is to conduct a quantitative risk assessment (QRA) of the latest HRS model representing Japanese HRSs with the most current information and to identify the most significant scenarios that pose the greatest risks to the physical surroundings in the HRS model. The results of the QRA show that the risk contours of 10^?3 and 10^?4 per year were confined within the HRS boundaries, whereas the risk contours of 10^?5 and 10^?6 per year are still present outside the HRS. Comparing the breakdown of the individual risks (IRs) at the risk ranking points, we conclude that the risk of jet fire demonstrates the highest contribution to the risks at all of the risk ranking points and outside the station. To reduce these risks and confine the risk contour of 10^?6 per year within the HRS boundaries, it is necessary to consider risk mitigation measures for jet fires.     

Wideband and compact folded loop antenna

A simple and successful design method that yields a wideband and compact antenna without a ground plane is proposed. The antenna, referred to as the folded loop antenna, can, with the right parameters, achieve wideband characteristics. Calculated and measured results agree well and more than 50% bandwidth (return loss /spl les/-10 dB) is obtained.     

Predicting the Life Span of Dies Used for Soft Magnetic Core Motors

This paper describes a method of predicting the life span of the dies used in motor manufacture from soft magnetic composites (SMCs). In the present study, a clawtooth motor was used. The method involves performing a stress analysis of a die followed by fatigue testing of test pieces. In the analysis, the SMC was assumed to be in powder form and its yield function was derived by a simple method. In addition to the analysis, we describe a simpler and more effective method in which the properties of the SMC are treated as boundary conditions. In the fatigue tests, we used test pieces that simulated the shape and construction material of the die. To predict the life span of the die, we evaluate the SN diagram, which represents the relationship between the maximum stress and fatigue life with respect to the stress generated in the die. The life expectancy of a new die, which is about 100 cycles of use, is found to agree substantially with its actual life. Furthermore, we explain how to extend the life span of a die to the targeted life span, namely, more than 200,000 cycles of use, by changing its shape to reduce stress.     

Spontaneous hydrolytic degradability of copolyesters having tetrahydropyran rings in their backbones

Homo- and copolyesters, containing 2,5-linked tetrahydropyran rings in their backbones, were prepared by cationic ring-opening polymerization of bicyclic lactones, 2,6-dioxabicyclo [2.2.2] octan-3-one ( 1 ), and its 4-methoxy-carbonyl and 4-methoxy-carbonyl and 4-benzyloxycarbonyl derivatives ( 3 and 4 ). Copolyesters, having pendant carboxyl groups, were derived from the copolymers containing 4 as one of the comonomers by the catalytic hydrogenolysis of the pendant benzyloxy–carbonyl groups. Copolyesters, containing both 2,5-linked and 2,6-linked tetrahydropyran rings in the main chains, were obtained by the copolymerization of 1 with 6,8-dioxabicyclo [3.2.1] octan-7-one ( 13 ), which is a structural isomer of 1 . Spontaneous hydrolytic degradability of these polyesters was investigated in a phosphate buffer solution (pH 7.5) at 27°C. The degradability of the polyesters markedly depended on the molecular structure: hydrophobic pendant groups retarded the hydrolytic degradation, whereas hydrophilic pendant groups accelerated it. In particular, a small amount of pendant carboxyl groups significantly enhanced the hydrolytic degradability of the copolyesters from 1 . Polyesters, containing 2,6-linked tetrahydropyran rings in their backbones, underwent hydrolytic degradation more readily than those entirely consisting of 2,5-linked tetrahydropyran rings. © 1994 John Wiley & Sons, Inc.     

Development of new‐type outdoor termination using composite insulator with SF6 gas: Commercial use for 77‐kV transmission lines and development for 154‐kV XLPE cable

Recently, composite insulators have been increasingly employed mainly for economic reasons. We have developed a new type of outdoor termination using a composite insulator, which can be installed horizontally on a steel tower in order to reduce the construction cost. In this outdoor termination, SF₆ gas is filled in the composite insulator and a cold shrinkable premolded rubber unit is applied instead of the combined use of a rubber‐molded stress relief cone, epoxy resin insulator and spring unit. The application of the composite insulator, SF₆ gas and cold shrinkable premolded rubber unit reduces the total weight and makes it possible to install the termination horizontally on the tower. The new‐type outdoor termination for 77‐kV XLPE cable has already been applied in commercial use and enabled a reduction of the construction costs for power transmission lines. A 154‐kV new‐type outdoor termination has been developed and its initial electrical tests were successfully completed. This paper describes the design and performance of both 77‐kV and 154‐kV new‐type outdoor termination, and a follow‐up survey of the 77‐kV new termination in a commercial use. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 18– 26, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20511     

Wordline voltage generating system for low-power low-voltage flashmemories

A low-power wordline voltage generating system is developed for low-voltage flash memories. The limit for the stand-by current including the operation current for the band-gap reference and the stand-by wordline voltage generator is discussed. The system was implemented on a 1.8-V 32-Mb flash memory fabricated with a 0.25-μm flash memory process and achieved with very low stand-by current of 2 μA typically, and high operating frequency of 25 MHz in read operation at 1.8 V. A low-voltage level shifter with high-speed switching is also proposed     

Fischer–Tropsch synthesis in slurry-phase reactors over Mn- and Zr-modified Co/SiO2 catalysts

Fischer–Tropsch (F–T) synthesis was carried out in a gas-flowed slurry-phase reaction system over Mn- and Zr-modified Co/SiO₂ catalysts. A 0.5 L stirred tank slurry reactor (STSR) was used for catalyst screening and a 12.5 L slurry bubble column reactor (SBCR) was used for trial pilot operation. While using the 0.5 L reactor for catalyst screening, Co supported on the SiO₂ with an average pore size of 10 nm showed a high catalytic performance for the F–T synthesis due to the suitable Co particle size in the catalyst. Zr promoter improved the activity and Mn promoter improved the stability of Co/SiO₂ catalyst for the F–T synthesis. H₂-TPR profiles indicated that Zr and Mn promoters improved the reduction degree of Co₃O₄ particles (on SiO₂ surface) to Co⁰ active species in H₂ flow at low temperature. While using the 12.5 L reactor for trial pilot operation over Mn–Zr–Co/SiO₂ catalyst, the space-time yield (STY) of C₅₊ hydrocarbons (liquid fuel) showed almost the same values when various solvents (n-C₁₆H₃₄, n-C₁₄H₃₀, diesel from petrol station, F–T crude oil) were used. Diesel and F–T crude oil are suitable for using in a large-scaled F–T synthesis plant owing to the low prices. Mn–Zr–Co/SiO₂ catalyst achieved a STY of C₅₊ hydrocarbons larger than 1000 g-C₅₊ kg-cat^? 1 h^? 1 in the 12.5 L reactor. The production capacity of liquid fuel from the 12.5 L reactor reached to 15.6 L per day (assumed for 24 h continuous operation). The stirring was very important for the F–T synthesis both reaction in the 0.5 L reactor and reaction in the 12.5 L reactor. The shape of slurry reactor also influenced the CO conversion for the F–T synthesis: reaction in the 12.5 L SBCR gave a higher CO conversion than that of reaction in the 0.5 L STSR (at the same W/F value under the same stirring speed) because the slender column reactor (SBCR) extended the residue time of reaction gas in the slurry-phase containing catalyst.     

Fcgamma receptor IIA H/R131 polymorphism in patients with antiphospholipid antibodies

A role for Fcgamma receptor in the pathophysiology of thrombosis in APS has been hypothesized. The polymorphism of this receptor, FcgammaRIIA H/R131, is associated with the binding affinity for human IgG2 (i.e. FcgammaRIIA-H131 isoform has a higher affinity than FcgammaRIIA-R131). Since anti-beta2 glycoprotein I antibodies (anti beta2GPI), which play a major pathogenic role in APS, show IgG2 dominant distribution, we investigated the prevalence of receptor isoforms in patients with antiphospholipid antibodies (aPL) by a PCR-RFLP method. We studied 100 Caucasian patients with aPL (57 primary APS, 32 secondary APS to SLE and 11 other diseases with aPL) and 41 healthy controls. H131/H131, H131/R131 and R131/R131 genotypes were found in 21 (21%), 50 (50%) and 29 (29%) in the patient group, and 9 (22%), 23 (56%) and 9 (22%) in control group, respectively. Thus there was no statistically significant difference in the prevalence of each genotype in these groups. None of the clinical manifestations of primary APS (arterial/venous thrombosis, recurrent pregnancy loss and thrombocytopenia) was significantly correlated with any FcgammaRIIA genotype. In conclusion, FcgammaRIIA polymorphism did not correlate with the manifestations of APS, and FcgammaRIIA genotype is not a genetic marker of APS.