1.3 μm InAsyP1-y-InPstrained-layer quantum-well laser diodes grown by metalorganic chemicalvapor deposition

The authors have fabricated 1.3-μm InAsP-InP separate-confinement-heterostructure (SCH) strained-layer double-quantum-well (SL-DQW) laser diodes (LDs) by metalorganic chemical vapor deposition (MOCVD). A low threshold current density of 410 A/cm ² was obtained. The CW threshold current was as low as 1.8 mA at 20°C, and maximum CW operating temperature of 120°C was obtained. These characteristics are almost the same as those of well-designed GaInAsP-InP SL-QW LDs. Further improvement of the characteristics of InAsP-InP LDs is expected by optimizing the device structure     

Effect of Mixing Time on the Lubricating Properties of Magnesium Stearate and the Final Characteristics of the Compressed Tablets

The effect of mixing time on hardness, disintegration time and ejection force in tablettlng of magnesium stearate and lactose granules was studied. The hardness of the tablets decreased with an increase in mixing time of the blends, as previously reported. A semilogarithmic plot of the hardness versus mixing time gave a straight line having a turning point. At the early phase of mixing the hardness was decreasing with a large first-order rate and then continued to decrease with another small first-order rate. The change in disintegration time or ejection force versus mixing time was basically the same as that in the hardness. This type of plot was applicable to the mixing magnesium stearate with not only granular but also powdered materials.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Peroxiredoxin 2 as a chemotherapy responsiveness biomarker candidate in osteosarcoma revealed by proteomics

Purpose : We aimed to identify novel chemotherapy responsiveness biomarkers for osteosarcoma (OS) by investigating the global protein expression profile of 12 biopsy samples from OS patients. Experimental design : Six patients were classified as good responders and six as poor responders, according to the Huvos grading system. The protein expression profiles obtained by 2‐D DIGE consisted of 2250 protein spots. Results : Among them, we identified 55 protein spots whose intensity was significantly different (Bonferroni adjusted p‐value<0.01) between the two patient groups. Mass spectrometric protein identification demonstrated that the 55 spots corresponded to 38 distinct gene products including peroxiredoxin 2 (PRDX 2). Use of a specific antibody against PRDX 2 confirmed the differential expression of PRDX 2 between good and poor responders, while PRDX 2 levels as measured by Western blotting correlated highly with their corresponding 2‐D DIGE values. The predictive value of PRDX 2 expression was further confirmed by examining an additional four OS cases using Western blotting. Conclusions and clinical relevance : These results establish PRDX 2 as a candidate for chemotherapy responsiveness marker in OS. Measuring PRDX 2 in biopsy samples before treatment may contribute to more effective management of OS.     

Thermoreversible behavior of κ-carrageenan and its apatite-forming ability in simulated body fluid

Osteoconductive materials with self-setting ability have received much attention because their properties allow developing injectable materials for bone defects. Thermosensitive hydrogel with ability of bone-like apatite formation in a body environment is a candidate of injectable bone fillers with osteoconductivity because the apatite formation on materials is an essential to show osteoconduction. The present study focused on the development of a thermosensitive hydrogel through modifications of the sulphonic groups of the polysaccharide, κ-carrageenan, with potassium chloride (KCl) and calcium chloride (CaCl₂). We found that the gelation temperature of κ-carrageenan solutions increased with increasing amounts of K⁺ ions. Apatite formation was observed on the gel after exposure to simulated body fluid for 0.5 day when the gel was prepared with a molar ratio of Ca²⁺/sulfonic groups = 1.5. These results indicate that a thermosensitive κ-carrageenan hydrogel with apatite-forming ability was obtained through the incorporation of K⁺ and Ca²⁺ ions into the solution.     

Guided-mode resonant grating filter with an antireflection structured surface

We describe a new structure of guided-mode resonant grating (GMRG) filters with low sideband reflectance. This GMRG filter consists of a high-index thin film on an antireflective structured surface called "moth-eye structure." Since the high-index film undulates along the surface structure, the film acts as a modulated optical waveguide. An incident light wave satisfying a resonant condition is reflected by the GMRG filter, and nonresonant light waves pass through the filter. This GMRG filter is valid for reducing reflection of nonresonant light waves in a wide spectral range. The resonant reflection of this new filter was investigated by numerical calculation based on an electromagnetic grating analysis. In the case of a triangular antireflective surface structure whose thickness is 2x greater than its period, the sideband reflectance for nonresonant light waves was lower than 0.5% for TM-polarized light in a wide range of wavelengths.     

Analysis of mumps vaccine failure by means of avidity testing for mumps virus-specific immunoglobulin G

Rapid ventricular pacing (RVP) in dogs creates a well characterized model of dilated cardiomyopathy. Standard pacing protocols use RVP at 240-260 beats/min for 2-4 weeks, and result in high mortality rates if continued longer. The authors describe a modification of RVP that results in significant heart failure by 4 weeks, but can be continued for up to 10 weeks with low mortality. Nineteen mongrels underwent RVP at 215 beats/min for 10 weeks. Serial pressure-volume analysis and echocardiography were performed in this model to assess longitudinally changes in left ventricular (LV) function and volumes. The mortality rate was 10%. Significant progressive LV dysfunction with concomitant LV enlargement was observed throughout the pacing period. Finally, norepinephrine levels were elevated at the end of pacing, consistent with an activated sympathetic system. This modified RVP protocol permits long-term pacing with a low mortality rate and results in progressive heart failure throughout the pacing period. This model would be useful in the long-term evaluation of newer surgical and medical therapies of the failing heart.     

Preparation and Properties of Bi4 − x Nd x Ti3O12 Thin Films by Chemical Solution Deposition

Neodymium-modified Bi₄Ti₃O₁₂, (Bi, Nd)₄Ti₃O₁₂ (BNT) ferroelectric thin films have been prepared on Pt/TiO_x/SiO₂/Si substrates using metal-organic precursor solutions by the chemical solution deposition method. The BNT precursor films crystallized into the Bi layered perovskite Bi₄Ti₃O₁₂ (BIT) as a single-phase above 600C. The synthesized BNT films revealed a random orientation having a strong 117 reflection, whereas non-substituted BIT thin films exhibited a random orientation with strong 00l diffractions. Among Bi_{4 – x}Nd_xTi₃O₁₂ [x = 0.0, 0.5, 0.75, 1.0] thin films, Bi_3.25Nd_0.75Ti₃O₁₂ thin films showed a well-saturated P-E hysteresis loop with the highest P_r (22 C/cm²) and a low E_c (69 kV/cm) at an applied voltage of 5 V. The Nd-substitution with the optimum amount for the Bi site in the BIT structure was effective not only for promoting the 117 preferred orientation but also for improving the microstructure and ferroelectric properties of the resultant films.     

Lipase production in two-step fed-batch culture of organic solvent-tolerant Pseudomonas aeruginosa LST-03

Efficient lipase production by two-step fed-batch culture of an organic solvent-tolerant bacterium, Pseudomonas aeruginosa LST-03, was investigated. When FB synthetic medium was used in flask culture, no lipase activity was detected, whereas lipase was produced at 2.3 I.U./ml in C2 complex medium. However, lipase production was induced in FB medium when a fatty acid was added to the culture broth in the stationary phase. Among fatty acids tested, long chain saturated fatty acids, such as C18 (stearic acid) and C20 (arachidic acid), were found to function as effective inducers for the production of lipase, giving an activity level almost the same as that obtained in C2 medium in flask culture. Two-step lipase production, comprised of a growth phase in fed-batch mode and a production phase in which lipase was induced by the addition of 5% (v/v) stearic acid, was carried out in a jar-fermentor. In the growth phase, the maximum cell concentration at 16 h was only 20 in terms of the optical density at 660 nm (OD660), and a low level of lipase production (8 I.U./ml) was obtained after 167 h. This was considered to be due to the exhaustion of several medium components brought about by the use of an unsuitable medium or feeding solution. After analyzing the contents of the compounds in the culture broth by inductively coupled plasma spectrometry for metal ions and HPLC for anions, a modified FB medium was designed. When this modified FB medium was used in two-step fed-batch culture, the maximum cell concentration reached an OD660 of 55 (30.2 g-dry cells/l) at 16.5 h, and lipase was produced at 96 I.U./ml after 35 h, which is approximately 40 times higher than the production level obtained in flask culture using C2 medium.     

Physiological role of Ca2+-permeable nonselective cation channel in endothelin-1-induced contraction of rabbit aorta

The alpha-amylase of Streptomyces sp. IMD 2679 was subject to catabolite repression. Four different growth rates were achieved when the organism was grown at 40 degrees C and 55 degrees C in the presence and absence of cobalt, with an inverse relationship between alpha-amylase production and growth rate. Highest alpha-amylase yields (520 units/ml) were obtained at the lowest growth rate (0.062 h-1), at 40 degrees C in the absence of cobalt, while at the highest growth rate (0.35 h-1), at 55 degrees C in the presence of cobalt, alpha-amylase production was decreased to 150 units/ml. As growth rate increased, the rate of specific utilisation of the carbon source maltose also increased, from 46 to 123 micrograms maltose (mg biomass)-1 h-1. The pattern and levels of alpha-glucosidase (the enzyme degrading maltose) detected intracellularly in each case, indicate that growth rate effectively controls the rate of feeding of glucose to the cell, and thus catabolite repression.