Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

Differential modes of nuclear localization signal (NLS) recognition by three distinct classes of NLS receptors

The targeting of karyophilic proteins to nuclear pores is mediated via the formation of a nuclear pore-targeting complex, through the interaction of nuclear localization signal (NLS) with its NLS receptor. Recently, a novel human protein, Qip1, was identified from a yeast two-hybrid system with DNA helicase Q1. This study demonstrates that Qip1 is a novel third class of NLS receptor that efficiently recognizes the NLS of the helicase Q1. Moreover, the data obtained in this study show that the specific interaction between Qip1 and the NLS of the helicase Q1 requires its upstream sequence of the minimal essential NLS. By using purified recombinant proteins alone in the digitonin-permeabilized cell-free transport system, it was demonstrated that the two known human NLS receptors, Rch1 and NPI-1, are able to transport all the tested NLS substrates into the nucleus, while Qip1 most efficiently transports the helicase Q1-NLS substrates, which contain its upstream sequence in so far as we have examined the system. Furthermore, in HeLa cell crude cytosol, it was found that endogenous Rch1 binds to all the tested NLS substrates, while the binding of endogenous NPI-1 is restricted to only some NLSs, despite the fact that NPI-1 itself shows binding activity to a variety of NLSs. These results indicate that at least three structurally and functionally distinct NLS receptors exist in the human single cell population, and suggest that the nuclear import of karyophilic proteins may be controlled in a complex manner at the NLS recognition step by the existence of a variety of NLS receptors with various specificities to each NLS.     

An equation of state for 1,1-difluroethane (HFC 152a)

An equation of state for 1,1-difluoroethane (HFC 152a, CH₃CHF₂) has been developed on the basis of reliable experimental data including PVT, liquid C_p, and saturated-liquid-density data measured by our group. It is a non-dimensionalized virial equation whose functional form is the same as that originally developed for 1,1,1,2-tetrafluoroethane (HFC 134a) in our group. The effective range is for pressures up to 15 MPa, temperatures from 230 to 450 K, and densities to 1000 kg m⁻³. The equation represents reliable PVT measurements within ± 1% in pressure for the superheated vapour and supercritical fluid, while within ±0.5% in density for the compressed liquid. In addition, it should be noted that the equation represents the other essential thermodynamic properties including vapour pressures, saturated-liquid/ vapour densities, isobaric/isochoric specific heats and sound velocity in both the liquid and gaseous phase of HFC 152a.     

Impulse breakdown voltages of triggered multistage vacuum gap

Several sealed-off triggered vacuum gaps are connected in series to improve hold-off voltage. The characteristics of impulse breakdown voltage of these series-connected gaps are investigated experimentally. The sum hold-off voltage of series-connected gaps decreases to a unit hold-off voltage when the maximum value of voltage division ratio across the gaps increases to unity. Self-breakdown probability of the series-connected gaps is always higher than that of a single gap under the same conditions. Hence, stage efficiency of the multistage gap decreases with increasing number of stages. Its value is 90 percent with 2-stage gap and 75 percent with 5-stage gap, respectively, under the same voltage division ratio and the same gap length (2.0 mm) in each stage. Triggered breakdown voltage of 2- or 3- stage gap is several hundred volts when all gaps are triggered simultaneously at the peak of the main impulse wave and a working voltage range is nearly 100 percent in this case. The working voltage range decreases with number of stages. Its value is 45 percent with 3-stage gap and 15 percent with 5-stage gap, respectively, when one triggered gap is fired for switching.     

Silica removal from Mokai, New Zealand, geothermal brine by treatment with lime and a cationic precipitant

Preliminary experiments using two chemicals (CaO, a quicklime, and a cationic nitrogen-bearing precipitant, EC-004) to remove silica from geothermal brine were undertaken at the Mokai geothermal plant, New Zealand. The brine was mixed with the reagent (CaO or EC-004). The reaction was studied from the start of the experiment (NRT, 0 min, no retaining time) and after 15 min (15RT) at 90 °C. The concentration of silica in the brine was initially 954 mg/l, and decreased linearly with increasing reagent concentration. When CaO is added, the silica concentration at 15RT was 200 mg/l lower than at NRT and became almost zero on addition of 1.5 g/l. In contrast, when EC-004 is added, the total silica concentration nearly reaches the solubility of amorphous silica at 90 °C. In order to prevent silica scaling in Mokai brines cooled to 90 °C, the CaO and EC-004 added should be individually adjusted to 0.5 g/l and 80 mg/l, respectively.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

Far-Infrared Reflection Spectra of Dielectric Ceramics for Microwave Applications

Far-infrared reflection spectra of dielectric ceramics, BaSm₂Ti₅O₁₄, BaTi₄O₉, and some pcrovskites such as Ba(Zn_1/3Nb_2/3)O₃, have been measured at room temperature using a Fourier transform infrared spectrometer in order to investigate the effect of the crystal structure on the dielectric properties. As for perovskites, Sr(Zn_1/3Nb_2/3)O₃ and Sr(Mg_1/3Nb_2/3)O₃, in which B site ions are ordered, were also measured. Reflectance data were analyzed by means of a factorized form of dielectric functions instead of the classical dispersion theory, and all of the spectra were well fitted. The values of dielectric constants and tan δ calculated from the reflectance data were in good agreement with resonant cavity measurements at 5 GHz. Furthermore, results of this study have shown that the main contribution to the microwave dielectric properties is caused by low-frequency optically active modes located at 50 to about 300 cm⁻¹, and for perovskite structures it is suggested that the ordering of B site ions is significant in obtaining low dielectric losses.     

OA&M framework for multiwavelength photonic transport networks

Photonic networks based on wavelength division multiplexing (WDM) and optical path technologies are expected to realize flexible, transparent, and cost-effective transport networks with a large transmission capacity. This paper explores the design framework of photonic transport networks taking into consideration the operation administration and maintenance (OA&M) functions required for the successful introduction of WDM systems based on the optical path concept. From the view point of network maintenance, clear distinction is made between the optical path layer and the optical section layer to facilitate accurate and smooth failure localization. The digital multiplexing span between physical multiplexing interfaces at the end-to-end digital nodes should have the same maintenance span as the corresponding optical path. We argue that cooperative maintenance by OA&M functions at both the digital and optical layers can be a practical way of network supervision. A supervisory (SV) signal transfer method and a configuration that is suitable for the terrestrial trunk network are also indicated. As an example, a practical SV system design methodology and an actual procedure developed for a single channel optical transmission system based on optical in-line amplifiers are introduced. Furthermore, application of the developed SV system and network restoration schemes is discussed for future WDM-based photonic networks. The OA&M aspects introduced will be valuable for creating future photonic network systems     

Septic cholangitis occurring 11 years after inadvertent ligation of the right hepatic duct during cholecystectomy: a case report

We report a case of acute cholangitis caused by the inadvertent ligation of the right hepatic duct during a cholecystectomy performed 11 years before. When the condition of the right hepatic duct or accessory bile duct ligation persists for more than several years, resulting in atrophy of the relevant part of the liver, bile duct ligation will rarely cause severe clinical problems. However, acute cholangitis may occur, as in our patient, so long-term follow-up of the patient is warranted.     

Stability of protective oxide films in waste incineration environment—solubility measurement of oxides in molten chlorides

Solubility measurements of several oxides in molten NaCl-KCl and NaCl-KCl-Na₂SO₄-K₂SO₄ were conducted in three different levels of basicity. The dissolution behavior of the oxides showed almost the same tendency as that shown by the dissolution behavior of the oxides in molten Na₂SO₄ in literature. In a waste incineration environment, a protective Cr₂O₃ film easily dissolves in molten chlorides as CrO₄²⁻ because pO²⁻ of the molten chlorides tends to have a small value due to the effect of water vapor contained in the combustion gas. From the result of the solubility measurement, the addition of molybdenum and/or silicon was expected to improve the corrosion resistance of alloys. Laboratory corrosion tests confirmed this expectation. However, the scale analysis suggested that the effect of molybdenum could not be explained completely by only the mechanism derived from the result of the solubility measurement.