Gas absorption accompanied by an instantaneous irreversible reaction in laminar falling films of pseudoplastic liquids

Gas absorption accompanied by an instantaneous irreversible chemical reaction into laminar falling films of power-law liquids was studied theoretically. The convective-diffusion equations for a solute gas and a liquid-phase reactant were solved numerically and the numerical solution for the reaction factor was obtained as a function of the Graetz number, the concentration ratio, the diffusivity ratio and the power-law index of the liquid.     

Preparation of SiC particles coated with alumina hydrate: Effect of reaction condition on particle coalescence

Alumina-hydrate-coated SiC particles were prepared via a homogeneous precipitation method using urea, and the conditions for uniform coating and less coalescence of the particles were investigated. Coalescence of coated particles could be said to occur by collision and agglomeration followed by deposition of alumina hydrate on the agglomerated particles. Coalescence of coated particles was suppressed by use of low reaction temperature, low concentration of aluminium sulfate, high concentration of urea, intensive stirring, and a flow reactor.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Evaluation of advanced fuzzy logic PSS on analog network simulatorand actual installation on hydro generators

This paper presents the experimental evaluation of an advanced fuzzy logic PSS on the analog network simulator at the Research Laboratory of Kyushu Electric Power Co., Inc. The proposed power system stabilizer (PSS) is set up by using a personal computer with A/D and D/A conversion interfaces. The personal computer based PSS was set on the analog network simulator to evaluate the effectiveness of the advanced fuzzy logic control scheme, and to provide sufficient data for the actual installation of the proposed PSS on hydro-units in the Kyushu Electric Power System. This paper also describes the actual installation of the proposed PSS on hydro-units in the Kyushu Electric Power System for the long term evaluation of the proposed PSS using its prototypes     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Experimental study on a quasi-optical mode converter for transforming the whispering-gallery mode into a circularly polarized hollow radiation beam

An experiment was carried out for transforming the 120 GHz-TE_12.2 whispering-gallery mode (WGM) into a circularly polarized hollow radiation beam. A hollow beam was formed by reflecting the WGM, which was radiated from a 16 mm radius circular waveguide cut, with an annular mirror having suitable local normal vectors. The experimentally observed field intensity profiles of the reflected wave were in good agreement with calculated results.     

Measurement of the thermal diffusivity of thin films on substrate by the photoacoustic method

Measurements of the thermal diffusivity of thin films on substrate have been performed by the photoacoustic method. In order to examine the method we have built a new apparatus and proposed (1) a system calibration procedure using optically and thermally thick reference samples and (2) a data analysis procedure based on the RG (Rosencwaig and Gersho) theory. As a result of using a transparent photoacoustic cell, the systematic errors which are caused by stray light have been reduced. With this apparatus, measurements have been performed on platinum, titanium, and stainless steel (SUS304) thin foils (thickness form 50 to 100 µm) with three different liquid backing materials (water, glycerol, and ethyl alcohol). The reproducibility was within ±7% regardless of film thickness and substrate materials.     

Interferon therapy after ablation of Kent bundle for a patient with chronic hepatitis type B complicated with WPW syndrome

Cardiotoxicity of interferon-alpha or gamma, such as fatal arrhythmia and myocardial infarction, has been reported. Therefore cardiotoxicity of interferon should be seriously considered before administration for patients with a pre-existing heart disease. We treated a patient with chronic active hepatitis type B, coexisted with Wolff-Parkinson-White syndrome, who has had frequent attacks of paroxysmal atrial fibrillation. To prevent the occurrence of fatal arrhythmia with an interferon therapy in this patient, we performed radiofrequency catheter ablation of the Kent bundle. After the successful ablation, we could safely administered recombinant interferon alpha-2b for chronic hepatitis type B.     

Direct growth of CdTe on (100), (211), and (111) Si by metalorganic chemical vapor deposition

CdTe epilayers were grown directly on (100), (211), and (111) silicon substrates by metalorganic chemical vapor deposition (MOCVD). The crystallinity and the growth orientation of the CdTe film were dependent on the surface treatment of the Si substrate. The surface treatment consisted of exposure of the Si surface to diethyltelluride (DETe) at temperatures over 600°C prior to CdTe growth. Direct growth of CdTe on (100) Si produced polycrystalline films whereas (lll)B single crystals grew when Si was exposed to DETe prior to CdTe growth. On (211) Si, single crystal films with (133)A orientation was obtained when grown directly; but produced films with (211)A orientation when the Si surface was exposed to DETe. On the other hand, only (lll)A CdTe films were possible on (111) Si, both with and without Te source exposure, although twinning was increased after exposure. The results indicate that the exposure to a Te-source changes the initial growth stage significantly, except for the growth on (111) Si. We propose a model in which a Te atom replaces a Si atom that is bound to two Si atoms.