Dependence of the efficiency-bandwidth product on electrical volumeof small dielectric loaded antennas

The efficiency fractional efficiency bandwidth product (EB) that is expressed as a ratio of the radiation resistance to the absolute value of an input reactance of an antenna is used as a performance measure for small dielectric-loaded monopole antennas (DLMAs). The dependence of the efficiency bandwidth (EB) on the permittivity of the dielectric loading (i.e., the electrical volume) is experimentally investigated for the first time after we succeeded in measuring the small radiation resistance of the DLMAs precisely on the basis of the Wheeler cap method. As a result, it was found that the EBs of some DLMAs were enhanced over a bare monopole antenna and an EB characteristic curve has a maximum point. This result suggests the presence of the optimum electrical volume for the dielectric loading in order to obtain the best EB performance. A calculation by the finite-difference time-domain (FDTD) method was also conducted to confirm the presence of the maximum EB value under a certain condition. A general reason for the existence of the peak value is also explained using a mathematical deduction     

Restoration of the red colour of photo-bleached carthamine in calcium-alginate gel membranes

The restoration of the red colour of carthamine (photo-bleached in polymeric heterosaccharide gels) was investigated using sodium salts, potassium salts, and alkali. Ca-alginate gel was stained with carthamine, and the red-dish membranes were exposed to fluorescent light for 2·5, 4·0 and 20 h (at 28°C). The resulting orange-yellow gel membranes were treated with Na- or K-citrate solution and the restoration of the red colouration was followed spectrophoto-metrically. The results indicate that the red colour of carthamine can be retained within the gel membranes, while yellow-coloured compounds were removed and/or transformed by the alkaline salt solutions.     

Prenatal diagnosis of Duchenne muscular dystrophy using single fetal cell in maternal blood

We developed a method that allows prenatal diagnosis of Duchenne muscular dystrophy using a single nucleated erythrocyte (NRBC) isolated from maternal blood. Maternal blood was obtained at 8 to 20 weeks of gestation. NRBCs were separated with Percoll using a discontinuous density gradient method and then collected by micromanipulator under microscopic observation. The entire genome of a single cell amplified by primer extension preamplification (PEP). Sex was determined from a small aliquot of the PEP reaction. After an NRBC was determined to be male and confirmed to be of fetal origin, dystrophin exons 4, 8, 12, 45, 48, 50, and 51 were determined from the same PEP reaction. This diagnostic method using maternal blood is safer than amniocentesis or cordocentesis and can be applied to other X-linked disease.     

New strategies for aspiration pneumonia

Aspiration pneumonia is associated with decreases in both swallowing and cough reflexes and is the most common cause of death in the elderly. Basal ganglia strokes might predispose these patients to develop pneumonia owing to reductions of both reflexes, resulting in frequent aspiration during sleep. An impairment of dopamine metabolism in the basal ganglia is observed in these patients and levodopa administration improves the impaired swallowing reflex. Both swallowing and cough reflexes are mediated by endogenous substance P (SP) released from vagal sensory nerves in the pharynx and upper airways. The addition of a low dose of capsaicin to liquid or food, which stimulates the release of SP, may help prevent aspiration pneumonia. Angiotensin-converting enzyme inhibitor decreases SP catabolism resulting in improvements in both reflexes. Oral care and the sitting position after meals may decrease aspiration pneumonia in the elderly.     

Photocatalytic H2 evolution under visible light irradiation on Zn1-x Cu x S solid solution

The H₂ evolution reaction from an aqueous Na₂SO₃ solution proceeded with 3.7% quantum yield under visible light irradiation (λ > 420 nm) on a Zn_0.957Cu_0.043S solid solution photocatalyst without co‐catalysts such as Pt. This revised version was published online in July 2006 with corrections to the Cover Date.     

Note: Accuracy of velocity correction for impact of a laser-accelerated miniature flyer with lithium fluoride shock-compressed along the [100] axis

We performed miniature flyer impact experiments to investigate the relationship between the apparent (u(a)) and actual (u(A)) particle velocities measured by a velocity interferometer in single-crystal lithium fluoride (LiF) that was shock-compressed along the [100] axis. The miniature flyer was accelerated to velocities in the range 652.5-1937.6 m/s by a tabletop pulsed laser. An empirical relationship of u(a) = (1.2749 ± 0.0102)u(A) was obtained. The obtained relationship agreed well with the results of a previous study within the experimental errors and its uncertainty was less than ±1%. This result indicates that the present experimental technique is effective for measuring the relationship between u(a) and u(A) of shocked transparent materials with a comparable accuracy to conventional methods.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.     

Magnetovolume effects in manganese nitrides with antiperovskite structure

Magnetostructural correlations in antiperovskite manganese nitrides were investigated systematically for stoichiometric and solid solution Mn₃Cu_1?xA_xN (A = Co, Ni, Zn, Ga, Ge, Rh, Pd, Ag, In, Sn or Sb). This class of nitrides is attracting great attention because of their giant negative thermal expansion, which is achieved by doping Ge or Sn into the A site as a relaxant of the sharp volume contraction on heating (spontaneous volume magnetostriction ω_s) because of the magnetovolume effects. The physical background of large ω_s and mechanism of how the volume contraction becomes gradual with temperature are central concerns for the physics and applications of these nitrides. An entire dataset of thermal expansion, crystal structure and magnetization demonstrates that the cubic triangular antiferromagnetic state is crucial for large ω_s. The intimate relationship between ω_s and the magnetic structure is discussed in terms of geometrical frustration related to the Mn₆N octahedron and magnetic stress concept. The results presented herein also show that ω_s depends on the number of d electrons in the A atom, suggesting the important role of the d orbitals of the A atom. Not all the dopants in the A site, but the elements that disturb the cubic triangular antiferromagnetic state, are effective in broadening the volume change. This fact suggests that instability neighboring the phase boundary is related to the broadening. The relation between the gradual volume change and the local structure anomaly is suggested by recent microprobe studies.     

Stable and super‐low friction of amorphous carbon nitride coatings in nitrogen gas by using two‐step ball‐on‐disk friction test

Effect of running‐in process on friction behaviour of carbon nitride (CNx) coating in N₂ gas stream was investigated with a newly introduced two‐step ball‐on‐disk friction test, where the rubbed Si₃N₄ ball in the pre‐sliding (step 1) was replaced by a new CNx‐coated Si₃N₄ ball in the subsequent sliding stage under N₂ gas (step 2). The two‐step friction test is clarified to be a simple but effective technique for obtaining contact material combination of self‐mated CNx coatings and for achieving stable and low frictions of CNx coatings. Friction coefficients of CNx/CNx in N₂ gas stream decrease greatly from 0.07 without pre‐sliding to less than 0.025 in two‐step friction tests. The minimum friction coefficient of 0.004 was obtained by introducing 500 cycles of pre‐sliding in ambient air. These stable and low frictions are attributed to the generation of self‐mated CNx coatings and the formation of a lubricious layer on the disk surface. Copyright © 2014 John Wiley & Sons, Ltd.