Laboratory Investigation of Stilling Basin Slope Effect on Bed Scour at Downstream of Stepped Spillway: Physical Modeling of Javeh RCC Dam

Stepped spillway and stilling basin are one of the most important energy dissipation structures. Eventhough, most of energy dissipated by these structures, but in skimming flow, the upstream flow motion is nonaerated and the residual energy capable to destroyed structures during floods. In this study, effect of stilling basin slope on bed scour, downstream of Javeh dam was investigating. Experiments performed in hydraulic structures laboratory of the University of Kerman with six different discharges (5, 7, 13, 17, 25 and 30 l/s.m) and five various stilling basin slope (0.02, 0.01, 0, ?0.01 and???0.02). The parameters such as maximum scour depth (d_s), flow velocity (in three point), water depth on upstream and downstream of stepped spillway and stilling basin, the distance of the maximum scour depth to sill (L_s) and the gheometery of scour hole measured. Result shown that when stilling basin slopes was 0.02, the average of maximum relative scour depth, 47% Increased and in ?0.02, 52.2% Decreased. In addition, the distance of maximum scour depth until stilling basin increased by increasing and decreased by decreasing the stilling basin slope.

     

A new hardening rule for metallic foam plasticity

Metallic foams are a class of porous materials widely used in the industry because of their advantages. In recent years, extensive studies on the behavior of these materials have been conducted. Several constitutive equations have also been presented and applied. This study proposes a new constitutive equation that predicts metallic foam behavior using the stress–strain curve in uniaxial compression. The proposed model offers a new functionality for work hardening and is evaluated for both isotropic and combined hardening. The constitutive equations are implemented in MATLAB and integrated using return mapping algorithm. The material parameters are identified using genetic algorithm and through a comparison of the experimental and numerical results. The aluminum foams discussed in this paper are the commercially available types, Foaminal and Alporas. The comparison of numerical and experimental results indicate that this new constitutive equation predicts foam behavior in a reasonable manner. Moreover, a good agreement is observed between the experimental and computational curves.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.     

Design and simulation of autonomous military vehicle control system based on machine vision and ensemble movement approach

The Journal of Supercomputing - On the battlefield, early detection of armored vehicles can have a positive effect. Because according to this issue, timely and appropriate reactions can be done....     

Central electron temperature estimations of TJ-II neutral beam injection heated plasmas based on the soft x ray multi-foil technique

The core electron temperature (T(e0)) of neutral beam heated plasmas is determined in TJ-II stellarator by using soft x ray detectors with beryllium filters of different thickness, based on the method known as the foil absorption technique. T(e0) estimations are done with the impurity code IONEQ, making use of complementary information from the TJ-II soft x ray tomography and the VUV survey diagnostics. When considering the actual electron density and temperature profile shapes, an acceptable agreement is found with Thomson scattering measurements for 8 different magnetic configurations. The impact of the use of both neutral beam injectors on the T(e0) measurements is addressed. Also, the behaviour of T(e0) during spontaneous profile transitions is presented.     

A Complete Experimental Investigation on The Rheological Behavior of Silver Oil Based Nanofluid

In this study, thermo‐physical properties including thermal conductivity, viscosity, density and specific heat capacity of an oil based nanofluid including silver as to be nanoparticles have been experimentally studied. The results indicate an enhancement in thermal conductivity which was depended on bulk temperature and volume fraction of utilized nanofluids. Viscosity data show a significant increment through volume fraction increasing. In addition, the specific heat capacity and density of nanofluids were studied experimentally and it was found that, all measured rheological properties of these nanofluids, were not in agreement to published correlations.     

A Real-Time Power Controller for Grid-Connected Inverters in LV Smart Microgrids

This paper presents a real-time power flow controller for VSIs （voltage source inverters） interfaced to low voltage microgrids. The proposed controller is modular, flexible, intelligent, inexpensive, portable, adaptive and designed to positively contribute in low voltage microgrids in which the lines R/X ratio is greater than the transmission lines. Therefore, the proposed control strategy is developed for operation in distribution lines. The controller strategy is different from the conventional grid-connected inverters which are designed based on transmission line characteristics. This controller, using a Texas Instrument general purpose DSP （digital signal processor）, is programmed and tuned using MATLAB/SIMULINK in order to enhance self-healing, reliability and stability of the grid. This general purpose controller makes proper decisions using its local measurements as the primary source of data. The controller has the capability of communicating with the adjacent controllers and sharing the information if/when needed. The power flow output of the inverter is tested for both islanded and grid-connected modes of operation. The inverter positively contributes to active and reactive power supply while operating in grid-connected mode. The proposed control method has been implemented on a Texas Instrument DSC （digital signal controller） chip and tested on a hardware test bench at the Alternative Energy Laboratory at WVU1T （West Virginia University Institute of Technology）. The system＇s experimental results veri~ the validity and efficiency of the proposed controller.     

The Effect of Pre-oxidation Treatment on Corrosion Behavior of Ni–Cu–Fe–Al Anode in Molten CaCl<Subscript>2</Subscript> Salt

This article presents Ni–Cu–Fe–Al alloy as a novel inert anode used in FFC process (the Fray Farthing Chen) in molten calcium chloride salts for producing titanium. The alloy was prepared by vacuum induction melting; then utilized as anode material in molten CaCl₂ for 16 h at 900 °C. Morphology and the corrosion behavior of the samples were analyzed using scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The product on the cathode was analyzed using X-ray diffraction (XRD). After 16 h electrolysis of anodes, EDS and SEM analysis of the samples showed that the corrosion depth of the non-oxidized sample was shorter. Corrosion attacks more severe for the pre-oxidized sample than the non-oxidized sample, which indicated that the corrosion resistance of outer layer is higher on the non-oxidized sample. The XRD results show that the TiO₂ pellets were successfully reduced to the lower oxides using the Ni–Cu–Fe–Al inert anode.