Laboratory Investigation of Stilling Basin Slope Effect on Bed Scour at Downstream of Stepped Spillway: Physical Modeling of Javeh RCC Dam

Stepped spillway and stilling basin are one of the most important energy dissipation structures. Eventhough, most of energy dissipated by these structures, but in skimming flow, the upstream flow motion is nonaerated and the residual energy capable to destroyed structures during floods. In this study, effect of stilling basin slope on bed scour, downstream of Javeh dam was investigating. Experiments performed in hydraulic structures laboratory of the University of Kerman with six different discharges (5, 7, 13, 17, 25 and 30 l/s.m) and five various stilling basin slope (0.02, 0.01, 0, ?0.01 and???0.02). The parameters such as maximum scour depth (d_s), flow velocity (in three point), water depth on upstream and downstream of stepped spillway and stilling basin, the distance of the maximum scour depth to sill (L_s) and the gheometery of scour hole measured. Result shown that when stilling basin slopes was 0.02, the average of maximum relative scour depth, 47% Increased and in ?0.02, 52.2% Decreased. In addition, the distance of maximum scour depth until stilling basin increased by increasing and decreased by decreasing the stilling basin slope.

     

A new hardening rule for metallic foam plasticity

Metallic foams are a class of porous materials widely used in the industry because of their advantages. In recent years, extensive studies on the behavior of these materials have been conducted. Several constitutive equations have also been presented and applied. This study proposes a new constitutive equation that predicts metallic foam behavior using the stress–strain curve in uniaxial compression. The proposed model offers a new functionality for work hardening and is evaluated for both isotropic and combined hardening. The constitutive equations are implemented in MATLAB and integrated using return mapping algorithm. The material parameters are identified using genetic algorithm and through a comparison of the experimental and numerical results. The aluminum foams discussed in this paper are the commercially available types, Foaminal and Alporas. The comparison of numerical and experimental results indicate that this new constitutive equation predicts foam behavior in a reasonable manner. Moreover, a good agreement is observed between the experimental and computational curves.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.     

Design and simulation of autonomous military vehicle control system based on machine vision and ensemble movement approach

The Journal of Supercomputing - On the battlefield, early detection of armored vehicles can have a positive effect. Because according to this issue, timely and appropriate reactions can be done....     

Calculation of maximum surface settlement induced by EPB shield tunnelling and introducing most effective parameter

This study aims to predict ground surface settlement due to shallow tunneling and introduce the most affecting parameters on this phenomenon.Based on data collected from Shanghai LRT Line 2 project undertaken by TBM-EPB method,this research has considered the tunnel's geometric,strength,and operational factors as the dependent variables.At first,multiple regression(MR) method was used to propose equations based on various parameters.The results indicated the dependency of surface settlement on many parameters so that the interactions among different parameters make it impossible to use MR method as it leads to equations of poor accuracy.As such,adaptive neuro-fuzzy inference system(ANFIS),was used to evaluate its capabilities in terms of predicting surface settlement.Among generated ANFIS models,the model with all input parameters considered produced the best prediction,so as its associated R~2 in the test phase was obtained to be 0.957.The equations and models in which operational factors were taken into consideration gave better prediction results indicating larger relative effect of such factors.For sensitivity analysis of ANFIS model,cosine amplitude method(CAM) was employed; among other dependent variables,fill factor of grouting(n) and grouting pressure(P) were identified as the most affecting parameters.     

Hand pose aware multimodal isolated sign language recognition

Multimedia Tools and Applications - Isolated hand sign language recognition from video is a challenging research area in computer vision. Some of the most important challenges in this area include...     

Dielectrophoretically assembled particles: feasibility for optofluidic systems

This work presents the dielectrophoretic manipulation of sub-micron particles suspended in water and the investigation of their optical responses using a microfluidic system. The particles are made of silica and have different diameters of 600, 450, and 250 nm. Experiments show a very interesting feature of the curved microelectrodes, in which the particles are pushed toward or away from the microchannel centerline depending on their levitation heights, which is further analyzed by numerical simulations. In doing so, applying an AC signal of 12 V_p–p and 5 MHz across the microelectrodes along with a flow rate of 1 μl/min within the microchannel leads to the formation of a tunable band of particles along the centerline. Experiments show that the 250 nm particles guide the longitudinal light along the microchannel due to their small scattering. This arrangement is employed to study the feasibility of developing an optofluidic system, which can be potentially used for the formation of particles-core/liquid-cladding optical waveguides.     

Using genetic programming for context-sensitive feature scoring in classification problems

Feature scoring is an avenue to feature selection that provides a measure of usefulness for the individual features of a classification task. Features are ranked based on their scores and selection is performed by choosing a small group of high-ranked features. Most existing feature scoring/ranking methods focus on the relevance of a single feature to the class labels regardless of the role of other features (context-insensitive). The paper proposes a genetic programming (GP)-based method to see how a set of features can contribute towards discriminating different classes. The features receive score in the context of other features participating in a GP program. The scoring mechanism is based on the frequency of appearance of each feature in a collection of GP programs and the fitness of those programs. Our results show that the proposed feature ranking method can detect important features of a problem. A variety of different classifiers restricted to just a few of these high-ranked features work well. The proposed scoring-ranking mechanism can also shrink the search space of size O(2 ⁿ ) of subsets of features to a search space of size O(n) in which there are points that are very likely to improve the classification performance.