Kinetik der polykondensation von natriumsulfidhydrat und 1,4-dichlorbenzol zu poly(thio-1,4-phenylen)

The kinetics of the polycondensation of sodium sulfide hydrate and 1,4-dichlorobenzene to poly(thio-1,4-phenylene) in 1-methyl-2-pyrrolidone as solvent was studied in a differential scanning calorimeter at temperatures between 220 and 280°C. This polycondensation shows an autocatalytic behavior and the kinetics can be modelled by a first order reaction up to complete conversion. This is explained by the low solubility of sodium sulfide in l-methyl-2-pyrrolidone. The concentration of sodium sulfide is regarded as being constant during the whole course of the reaction. The autocatalytic effect can be explained by the increase of the condensation rate constant at the beginning of polycondensation due to the higher reactivity of the oligomers compared to the monomers. The number- and the weight-average molecular weight of the products formed during the course of the polycondensation can be modelled by means of stochastic methods. A simple model with only two different rate constants of the condensation process is assumed. The concentration of sodium sulfide in the reactive phase is found to be 2–5% of the value of dichlorobenzene at the beginning of the reaction and remains constant nearly until the end of polycondensation.     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Liquid chromatographic determination of five benzoylurea insecticides in fruit and vegetables

A liquid chromatographic (LC) method was developed to determine 5 benzoylureas--diflubenzuron, hexaflumuron, teflubenzuron, flufenozuron, and lufenuron--in peppers, tomatoes, eggplants, cucumbers, and oranges. Preparation of samples involve extraction with acetone and partitioning into dichloromethane-petroleum ether. A portion of this extract is cleaned up with a solid-phase extraction aminopropyl disposable column. With LC analysis using an RP-8-DB microbore column, acetonitrile-water (70 + 30, v/v) as mobile phase, and photodiode array detection at 254 nm, recovery and repeatability data were collected for the 5 benzoylureas on 4 vegetables and citrus in the range 0.04-2.0 mg/kg. Validated limits of detection and quantitation were 0.01 and 0.04 mg/kg, respectively. The method is reliable for routine analysis of vegetables and fruits.     

Fracture behavior of core‐shell rubber–modified clay‐epoxy nanocomposites

Morphology and fracture mechanisms in two nanoclay‐filled epoxy systems were investigated using both microscopy and spectroscopy tools. Clay exfoliation was achieved using a series of sample preparation steps, and confirmed using wide angle X‐ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. Significant improvement in modulus was obtained when clay exfoliation was achieved. Incorporation of core‐shell rubber (CSR) in both caly‐filled epoxy systems leads to greatly enhanced fracture toughness. Optical microscopy and TEM observations of the CSR‐modified nanocomposites suggest that CSR cavitation. shear yielding of the matrix, clay layer delamination. CSR bridging, crack bifurcation. and crack deflection are among the operative toughening mechanisms observed, depending on the nature of the epoxy matrix utilized.     

Note: flowing ion population from a resonance cavity source

The experimental low energy plasma for hemispherical analyzers nominal testing thermal plasma facility of Dartmouth College uses a microwave plasma source which generates an ionosphere-like plasma through a two-step process. The plasma is initially generated inside a cylindrical, insulated, resonance cavity. This initial plasma must pass through a sheath in order to enter the main experimental region. This process imparts a significant flow velocity to the ions which has been neglected in previous analysis of this plasma source. We predict the flow energy of the ions to be between 12-15 eV depending on conservation laws and show agreement with experimental results.     

Top-down vs bottom-up methodologies in multi-agent system design

Traditionally, two alternative design approaches have been available to engineers: top-down and bottom-up. In the top-down approach, the design process starts with specifying the global system state and assuming that each component has global knowledge of the system, as in a centralized approach. The solution is then decentralized by replacing global knowledge with communication. In the bottom-up approach, on the other hand, the design starts with specifying requirements and capabilities of individual components, and the global behavior is said to emerge out of interactions among constituent components and between components and the environment. In this paper we present a comparative study of both approaches with particular emphasis on applications to multi-agent system engineering and robotics. We outline the generic characteristics of both approaches from the MAS perspective, and identify three elements that we believe should serve as criteria for how and when to apply either of the approaches. We demonstrate our analysis on a specific example of load balancing problem in robotics. We also show that under certain assumptions on the communication and the external environment, both bottom-up and top-down methodologies produce very similar solutions.

Acetals as nucleating agents for polypropylene

Nucleating agents increase the impact strength, tensile strength, and tensile elasticity modulus of semicrystalline polymers. Nucleating agents also decrease product cycle times, resulting in a cost savings per product unit. We have synthesized and tested 15 compounds as nucleactors for polypropylene. Of these, trinapthylidene sorbitol, tri-(4-methyl-1-naphthylidene)sorbitol, tri-(4-methoxy-1-naphthylidene) sorbitol, and dibenzylidene xylitol are efficient nucleators of polypropylene. Trinaphthylidene sorbitol (tns) has two major diastereomers: The “S” diastereomer yields a faster crystallization rate for polypropylene than does the commercial nucleator dibenzylidene sorbitol (Millad 3905). Crystallization rates are 208 and 88, respectively (t min^?1 × 1000). The “R” diastereomer, however, is a poor nucleator and interferes with the nucleating activity of the “S” diastereomer. A 52/48 mixture of diastereomers does not nucleate polypropylene, even at twice the concentration. This is first time that the importance of stereochemistry has been demonstrated in the nucleating action. © 1994 John Wiley & Sons, Inc.     

Evaluating the relationship between chemical exposure and cryptorchidism

One method for the evaluation of complex environmental and health datasets is the discrete mathematical method Hasse diagram technique based on partial orders. The introduced software program package is named PyHasse. In this paper we evaluate a possible human association between maternal exposure to organochlorine compounds used as pesticides and cryptorchidism among male children in Finland and Denmark. We identified differences in comparable and incomparable objects and quantified these differences by the software tool Similarity Analysis in the program PyHasse. Furthermore we interpreted the corresponding Hasse diagrams concerning chosen “striking objects”. We found the position of the chemicals AHCH (alpha-Hexachlorohexane), CHCE (cis-Heptachloroepoxide), DIEL (Dieldrin), and MIRE (Mirex) has some influence on the differentiation of the Hasse diagrams and hence of each two datasets analyzed. The largest disparities can be observed when we compare the Finnish and Danish datasets concerning cryptorchidism. The disparities are demonstrated in the corresponding Hasse diagrams.