Kinetik der polykondensation von natriumsulfidhydrat und 1,4-dichlorbenzol zu poly(thio-1,4-phenylen)

The kinetics of the polycondensation of sodium sulfide hydrate and 1,4-dichlorobenzene to poly(thio-1,4-phenylene) in 1-methyl-2-pyrrolidone as solvent was studied in a differential scanning calorimeter at temperatures between 220 and 280°C. This polycondensation shows an autocatalytic behavior and the kinetics can be modelled by a first order reaction up to complete conversion. This is explained by the low solubility of sodium sulfide in l-methyl-2-pyrrolidone. The concentration of sodium sulfide is regarded as being constant during the whole course of the reaction. The autocatalytic effect can be explained by the increase of the condensation rate constant at the beginning of polycondensation due to the higher reactivity of the oligomers compared to the monomers. The number- and the weight-average molecular weight of the products formed during the course of the polycondensation can be modelled by means of stochastic methods. A simple model with only two different rate constants of the condensation process is assumed. The concentration of sodium sulfide in the reactive phase is found to be 2–5% of the value of dichlorobenzene at the beginning of the reaction and remains constant nearly until the end of polycondensation.     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Granulocyte colony-stimulating factor worsens the outcome of experimental Klebsiella pneumoniae pneumonia through direct interaction with the bacteria

Besides its well-established effects on granulocytopoiesis, granulocyte colony-stimulating factor (G-CSF) has been shown to have direct effects on the recruitment and bactericidal ability of neutrophils, resulting in improved survival of experimentally infected animals. We studied the effect of G-CSF on the course of experimental pneumonia induced by Klebsiella pneumoniae, an important gram-negative bacillary pulmonary pathogen. Using a highly reproducible murine model, we here show the paradoxical finding that mortality from infection was significantly increased when animals received G-CSF before induction of pneumonia. Administration of G-CSF promoted replication of bacteria in the liver and spleen, thus indicating an impairment rather than an enhancement of antibacterial mechanisms. By contrast, a monoclonal antibody against Klebsiella K2 capsule significantly reduced bacterial multiplication in the lung, liver, and spleen, and abrogated the increased mortality caused by G-CSF. In vitro studies showed a direct effect of G-CSF on K pneumoniae resulting in increased capsular polysaccharide (CPS) production. When bacteria were coincubated with therapeutically achievable concentrations of G-CSF, phagocytic uptake and killing by neutrophils was impaired. Western blot analysis showed three binding sites of G-CSF to K pneumoniae. Binding of 125I-G-CSF to K pneumoniae was displaced by an excess of unlabeled G-CSF, whereas an unrelated cytokine, interleukin-1alpha, did not compete with G-CSF binding to the bacteria. Thus, in this model, the direct effect of G-CSF on a bacterial virulence factor, CPS production, outweighed any beneficial effect of G-CSF on recruitment and stimulation of leukocytes.     

Note: flowing ion population from a resonance cavity source

The experimental low energy plasma for hemispherical analyzers nominal testing thermal plasma facility of Dartmouth College uses a microwave plasma source which generates an ionosphere-like plasma through a two-step process. The plasma is initially generated inside a cylindrical, insulated, resonance cavity. This initial plasma must pass through a sheath in order to enter the main experimental region. This process imparts a significant flow velocity to the ions which has been neglected in previous analysis of this plasma source. We predict the flow energy of the ions to be between 12-15 eV depending on conservation laws and show agreement with experimental results.     

Top-down vs bottom-up methodologies in multi-agent system design

Traditionally, two alternative design approaches have been available to engineers: top-down and bottom-up. In the top-down approach, the design process starts with specifying the global system state and assuming that each component has global knowledge of the system, as in a centralized approach. The solution is then decentralized by replacing global knowledge with communication. In the bottom-up approach, on the other hand, the design starts with specifying requirements and capabilities of individual components, and the global behavior is said to emerge out of interactions among constituent components and between components and the environment. In this paper we present a comparative study of both approaches with particular emphasis on applications to multi-agent system engineering and robotics. We outline the generic characteristics of both approaches from the MAS perspective, and identify three elements that we believe should serve as criteria for how and when to apply either of the approaches. We demonstrate our analysis on a specific example of load balancing problem in robotics. We also show that under certain assumptions on the communication and the external environment, both bottom-up and top-down methodologies produce very similar solutions.

Acetals as nucleating agents for polypropylene

Nucleating agents increase the impact strength, tensile strength, and tensile elasticity modulus of semicrystalline polymers. Nucleating agents also decrease product cycle times, resulting in a cost savings per product unit. We have synthesized and tested 15 compounds as nucleactors for polypropylene. Of these, trinapthylidene sorbitol, tri-(4-methyl-1-naphthylidene)sorbitol, tri-(4-methoxy-1-naphthylidene) sorbitol, and dibenzylidene xylitol are efficient nucleators of polypropylene. Trinaphthylidene sorbitol (tns) has two major diastereomers: The “S” diastereomer yields a faster crystallization rate for polypropylene than does the commercial nucleator dibenzylidene sorbitol (Millad 3905). Crystallization rates are 208 and 88, respectively (t min^?1 × 1000). The “R” diastereomer, however, is a poor nucleator and interferes with the nucleating activity of the “S” diastereomer. A 52/48 mixture of diastereomers does not nucleate polypropylene, even at twice the concentration. This is first time that the importance of stereochemistry has been demonstrated in the nucleating action. © 1994 John Wiley & Sons, Inc.     

Simulation and analysis of pollen coronas

By numerical simulation of light scattering by birch and pine pollen grains, we create color plates of coronas with vertical elliptical shapes and strong brightenings, respectively. The shape of the pollen is modeled by the union of n ellipsoids. The Fraunhofer integral is solved by the use of the fast Hartley transform. The sensitivity of the patterns to pollen orientation, Sun elevation, and pollen shape and size is discussed. Good agreement is obtained with amazing photographs made by a Finnish network of amateur astonomers, in the case of strong vertical orientation of the pollen axis.     

Evaluating the relationship between chemical exposure and cryptorchidism

One method for the evaluation of complex environmental and health datasets is the discrete mathematical method Hasse diagram technique based on partial orders. The introduced software program package is named PyHasse. In this paper we evaluate a possible human association between maternal exposure to organochlorine compounds used as pesticides and cryptorchidism among male children in Finland and Denmark. We identified differences in comparable and incomparable objects and quantified these differences by the software tool Similarity Analysis in the program PyHasse. Furthermore we interpreted the corresponding Hasse diagrams concerning chosen “striking objects”. We found the position of the chemicals AHCH (alpha-Hexachlorohexane), CHCE (cis-Heptachloroepoxide), DIEL (Dieldrin), and MIRE (Mirex) has some influence on the differentiation of the Hasse diagrams and hence of each two datasets analyzed. The largest disparities can be observed when we compare the Finnish and Danish datasets concerning cryptorchidism. The disparities are demonstrated in the corresponding Hasse diagrams.