Fracture toughness of PAN-based carbon fibers estimated from strength-mirror size relation

Fracture toughness (K_IC) of representative high-strength type PAN (polyacrylonitrile)-based carbon fibers, Torayca™ T300 and T800H, with or without artificial surface defects, were estimated to be ca. 1 MPam^1/2 from the tensile strength vs. fracture mirror size relation, assuming a constant crack-to-mirror size ratio. The corresponding critical energy release rate (Γ) was ca. 7.4 J m⁻², which was close to the value derived from the reported surface energies for a graphite crystal. Similar K_IC values were obtained for the old-type PAN-based carbon fibers from the reported data by the use of the present estimation procedure.     

Permeation and separation of organic liquid mixtures through liquid-crystalline polymer networks

A side-chain liquid-crystalline polymer (LCP) was synthesized by the addition of the mesogenic monomer to poly(methyl siloxane) in presence of a Pt-catalyst. When an aqueous solution of 10wt% ethanol was permeated through a LCP membrane by pervaporation at various temperatures, the permeation rate increased with increasing temperature and drastically changed at glass-nematic (Tg) and nematic-isotropic (TNI) transition temperatures of the LCP membrane. The LCP membrane exhibited the waterpermselectivity in the glassy and liquid-crystalline states. The ethanol concentration in the permeate increased with increasing permeation temperature and the LCP membrane changed from the waterpermselectivity to the ethanol-permselectivity around TNI. These results suggested that the permselectivity was influenced by the change of the LCP membrane structure, that is, its state transformation. It was found that a balance of the orientation of mesogenic groups and flexibility of siloxane chains is very important for the permeability and selectivity.     

Septic cholangitis occurring 11 years after inadvertent ligation of the right hepatic duct during cholecystectomy: a case report

We report a case of acute cholangitis caused by the inadvertent ligation of the right hepatic duct during a cholecystectomy performed 11 years before. When the condition of the right hepatic duct or accessory bile duct ligation persists for more than several years, resulting in atrophy of the relevant part of the liver, bile duct ligation will rarely cause severe clinical problems. However, acute cholangitis may occur, as in our patient, so long-term follow-up of the patient is warranted.     

Hybrid negative example selection using visual and conceptual features

An application of Query-By-Example (QBE) is presented where shots that are visually similar to provided example shots are retrieved. To implement QBE, counter-example shots are required to accurately distinguish shots that are relevant to the query from those that are not (Li and Snoek (2009), Yu et al. (2004)). However, there are usually a huge number of shots, not relevant to a particular query, which can serve as counter-example shots. It is difficult for a user to provide counter-example shots that would aid retrieval. Thus, we developed a QBE method based on partially supervised learning where a retrieval model is constructed by selecting counter-example shots from shots without user supervision. To ensure the speed and accuracy of the QBE method, we select a small number of counter-example shots that are visually similar to given example shots but irrelevant to the query. Such shots are useful for characterizing the boundary between relevant and irrelevant shots. For our method, we first filter shots that are visually dissimilar to example shots based on SVMs on a visual feature. Then we filter shots relevant to the query based on concept detection results from pre-constructed classifiers. Shots that pass the above two tests are considered as counter-example shots. Experimental results obtained using TRECVID 2009 video data validate the effectiveness of our method.     

Voltammetric study of electrocatalysis for dioxygen reduction by trinuclear rutheniumammine complex confined in a polymer membrane

Electrocatalytic O₂ reduction was studied using a modified electrode coated with a Nafion membrane (Nf) dispersing a trinuclear ruthenium ammine complex ([(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]Cl₆, Ru-red). When measuring cyclic voltammogram under O₂ atmosphere (at 0.5 mV s⁻¹), catalytic currents due to O₂ reduction were found to develop below −0.2 V (vs. Ag/AgCl). Since Ru-red undergoes irreversible decomposition into the mononuclear complexes via the reduced state (Ru^III-Ru^III-Ru^III) (∼−0.1 V), it is suggested that the electrocatalysis originates from the decomposed species (initial active species: Ru^II(NH₃)₅(OH₂) and Ru^II(NH₃)₄(OH₂)₂) rather than from the Ru-red. Although the present electrocatalyst was also applied to H₂O₂ reduction system, the catalytic activity was found to be poor from the voltammetric behavior. It appeared that the kinetics of the electrocatalysis is much faster in the O₂ reduction than in the H₂O₂ one. A selective and direct catalysis for O₂ reduction into H₂O was suggested from a ring-disk voltammogram to take place by an aggregate of the mononuclear ruthenium complexes in the polymer matrix. In addition, it was found that electrocatalytic O₂ reduction involves a slow kinetic process, so that factors affecting the overall kinetics were discussed in terms of the catalysis mechanism.     

Cerebral Hyperperfusion after Revascularization Inhibits Development of Cerebral Ischemic Lesions Due to Artery-to-Artery Emboli during Carotid Exposure in Endarterectomy for Patients with Preoperative Cerebral Hemodynamic Insufficiency: Revisiting the “Impaired Clearance of Emboli” Concept

The purpose of the present study was to determine whether cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during exposure of the carotid arteries in carotid endarterectomy (CEA). In patients undergoing CEA for internal carotid artery stenosis (≥70%), cerebral blood flow (CBF) was measured using single-photon emission computed tomography (SPECT) before and immediately after CEA. Microembolic signals (MES) were identified using transcranial Doppler during carotid exposure. Diffusion-weighted magnetic resonance imaging (DWI) was performed within 24 h after surgery. Of 32 patients with a combination of reduced cerebrovascular reactivity to acetazolamide on preoperative brain perfusion SPECT and MES during carotid exposure, 14 (44%) showed cerebral hyperperfusion (defined as postoperative CBF increase ≥100% compared with preoperative values), and 16 (50%) developed DWI-characterized postoperative cerebral ischemic lesions. Postoperative cerebral hyperperfusion was significantly associated with the absence of DWI-characterized postoperative cerebral ischemic lesions (95% confidence interval, 0.001–0.179; p = 0.0009). These data suggest that cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during carotid exposure in CEA, supporting the “impaired clearance of emboli” concept. Blood pressure elevation following carotid declamping would be effective when embolism not accompanied by cerebral hyperperfusion occurs during CEA.     

Practical factors affecting the performance of a thin-film phase plate for transmission electron microscopy

A number of practical issues must be addressed when using thin carbon films as quarter-wave plates for Zernike phase-contrast electron microscopy. We describe, for example, how we meet the more stringent requirements that must be satisfied for beam alignment in this imaging mode. In addition we address the concern that one might have regarding the loss of some of the scattered electrons as they pass through such a phase plate. We show that two easily measured parameters, (1) the low-resolution image contrast produced in cryo-EM images of tobacco mosaic virus particles and (2) the fall-off of the envelope function at high resolution, can be used to quantitatively compare the data quality for Zernike phase-contrast images and for defocused bright-field images. We describe how we prepare carbon-film phase plates that are initially free of charging or other effects that degrade image quality. We emphasize, however, that even though the buildup of hydrocarbon contamination can be avoided by heating the phase plates during use, their performance nevertheless deteriorates over the time scale of days to weeks, thus requiring their frequent replacement in order to maintain optimal performance.     

An improved EZ-GCD algorithm for multivariate polynomials

The EZ-GCD algorithm often has the bad-zero problem, which has a remarkable influence on polynomials with higher-degree terms. In this paper, by applying special ideals, the EZ-GCD algorithm for sparse polynomials is improved. This improved algorithm greatly reduces computational complexity because of the sparseness of polynomials. The author expects that the use of these ideals will be useful as a resolution for obtaining a GCD of sparse multivariate polynomials with higher-degree terms.     

Evaluation of crystallinity in TiO2 films with mixed structures grown on MgO (001) substrates by argon-ion beam sputtering based on infrared reflection-absorption spectra

TiO2 films with thicknesses (d) above 15 nm were grown on optically polished surfaces of MgO (001) substrates held at 400 degrees C by sputtering a Ti target with an argon-ion beam when the partial pressure of O2 was kept at 1.1 x 10(-2) Pa. X-ray diffraction patterns show that TiO2 films with d < 56 nm are composed of an a-axis anatase-type structure, whereas those with d > 56 nm are composed of a mixture of phases with the c-axis parallel to the film surface. The thickness dependence of the infrared reflection-absorption spectra shows that TiO2 films with d < 56 nm are composed of both anatase and amorphous phases, whereas those with d > 56 nm are composed of anatase, rutile, and amorphous phases. The crystallinity in TiO2 films is also evaluated from the infrared reflection-absorption spectra by comparison of the observed and the calculated results determined from the dielectric function of anisotropic TiO2 bulk single crystal.