Polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters

The polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters was investigated. The binary systems of tri-n-butylborane and amino esters were found to be more effective for initiating the polymerization than tri-n-butylborane alone. Co-catalytic effects of amino acid esters were in the order: tyrosinate > glutamate > aspartate ? phenyl alaninate > serinate > glycinate. The rate of polymerization in a mixture of dimethylsulphoxide and toluene was proportional to the square root of the concentration of the initiator system, to the monomer concentration, and to the concentration of dimethylsulphoxide in the solvent. The overall energy of activation was estimated to be 4.6 kcal/mol for the tri-n-butylborane/methyl tyrosinate system. Copolymerization curves gave a typical free-radical character.     

Development of a specimen heating holder with an evaporator and gas injector and its application for catalyst

A specimen heating holder equipped with a gas injector and an evaporator has been developed for use with conventional transmission electron microscopes (TEMs). The developed specimen holder allows both synthesis of metal oxide support and deposition of catalyst nano-particles in situ. Since the holder is designed to be used in small gapped high-resolution objective lens pole-piece, all the procedure from the synthesis of support material to the deposition of catalyst as well as the behavior of the catalyst nano-particles on the support can be observed at near atomic resolution. The developed specimen holder was applied to the study of AuPd catalyst. First, air was injected onto heated aluminum particles via a gas injector to synthesize Al(2)O(3) support. Then, nano-particles of AuPd were deposited on the Al(2)O(3) support. After the deposition, the synthesized Al(2)O(3) support was heated and air was injected again to observe behaviors of the deposited AuPd nano-particles at elevated temperatures in the aerial environment. Behaviors of the AuPd nano-particles such as coalescence, segmentation and diffusion to the Al(2)O(3) support were dynamically observed at atomic level high resolution.     

Development of a high temperature-atmospheric pressure environmental cell for high-resolution TEM

An environmental cell for high-temperature, high-resolution transmission electron microscopy of nanomaterials in near atmospheric pressures is developed. The developed environmental cell is a side-entry type with built-in specimen-heating element and micropressure gauge. The relationship between the cell condition and the quality of the transmission electron microscopic (TEM) image and the diffraction pattern was examined experimentally and theoretically. By using the cell consisting of two electron-transparent silicon nitride thin films as the window material, the gas pressure inside the environmental cell is continuously controlled from 10(-5)?Pa to the atmospheric pressure in a high-vacuum TEM specimen chamber. TEM image resolutions of 0.23 and 0.31?nm were obtained using 15-nm-thick silicon nitride film windows with the pressure inside the cell being around 5?×?10(-5) and 1?×?10(4)?Pa, respectively.     

Relationship between grade and stage of renal pelvic and/or ureteral tumor and associated bladder tumor

The use of proxy respondents in surveys designed to provide population estimates of smoking prevalence offers an inexpensive way to obtain these data. The accuracy of this information is examined in analyzing data from tobacco use surveys of adults conducted in 22 North American communities as part of the National Cancer Institute's Community Intervention Trial for Smoking Cessation. Proxy-reported smoking status was obtained in a cross-sectional telephone survey conducted from August 1993 to January 1994 (n = 99,682). Self-reported smoking status was obtained from an in-depth interview of a sample of the respondents aged 25-64 years enumerated from the telephone survey (n = 31,417). Discrepancy rates were calculated by comparing the proxy-reported and self-reported smoking statuses of a given individual (n = 10,226). In both surveys, respondents were categorized as current smokers (those who currently smoke and have smoked at least 100 cigarettes in their lifetime), recent quitters (< or = 8 years since cessation), long-term quitters (> 8 years since cessation), and never smokers. The overall discrepancy rate between the self-report and the proxy report was 5.4%. Self-respondents who were black, Hispanic, Asian, recent quitters, or aged 25-34 years were more likely to have inconsistent proxy reports. The authors estimate that the screener interview underestimated the true smoking prevalence by 0.1% when they corrected for smoking status discrepancies. These results confirm that proxy-reported smoking status is an accurate and effective means to monitor populationwide smoking prevalence of adults.     

Study on Heat Transfer and Flow Characteristic Under Phase-Change Process of an Acoustically Levitated Droplet

Acoustic levitation is one of the levitation technique which is expected to be used for analytical chemistry and manufacturing new materials. Thus, it is important to gather the knowledge about acoustically levitated droplet. The purpose of this study is to investigate the heat transfer and flow behavior under phase change process of an acoustically levitated droplet. The following results were obtained from experiments. Evaporation process and external flow structure of the levitated droplet is visualized by a high speed camera and it is found that they differ by the type of fluid. Toroidal vortices are observed near the surface of the ethanol solution droplet. Heat transfer coefficient is estimated from the volume change and temperature gradient. It is substantially higher than that estimated by the existing experimental correlation.     

Nanoscale InGaSb heterostructure membranes on Si substrates for high hole mobility transistors

As of yet, III-V p-type field-effect transistors (p-FETs) on Si have not been reported, due partly to materials and processing challenges, presenting an important bottleneck in the development of complementary III-V electronics. Here, we report the first high-mobility III-V p-FET on Si, enabled by the epitaxial layer transfer of InGaSb heterostructures with nanoscale thicknesses. Importantly, the use of ultrathin (thickness, ~2.5 nm) InAs cladding layers results in drastic performance enhancements arising from (i) surface passivation of the InGaSb channel, (ii) mobility enhancement due to the confinement of holes in InGaSb, and (iii) low-resistance, dopant-free contacts due to the type III band alignment of the heterojunction. The fabricated p-FETs display a peak effective mobility of ~820 cm(2)/(V s) for holes with a subthreshold swing of ~130 mV/decade. The results present an important advance in the field of III-V electronics.     

Optically- and thermally-responsive programmable materials based on carbon nanotube-hydrogel polymer composites

A simple approach is described to fabricate reversible, thermally- and optically responsive actuators utilizing composites of poly(N-isopropylacrylamide) (pNIPAM) loaded with single-walled carbon nanotubes. With nanotube loading at concentrations of 0.75 mg/mL, we demonstrate up to 5 times enhancement to the thermal response time of the nanotube-pNIPAM hydrogel actuators caused by the enhanced mass transport of water molecules. Additionally, we demonstrate the ability to obtain ultrafast near-infrared optical response in nanotube-pNIPAM hydrogels under laser excitation enabled by the strong absorption properties of nanotubes. The work opens the framework to design complex and programmable self-folding materials, such as cubes and flowers, with advanced built-in features, including tunable response time as determined by the nanotube loading.