Extrapolation of fuzzy values from incomplete data bases

This paper presents different approaches which enable a data base management system to obtain a plausible fuzzy estimate for an attribute value of an item for which the information is not explicitly stored in the data base. This can be made either by a kind of analogical reasoning from information about particular items or by means of expert rules which specify the (fuzzy) sets of possible values of the attribute under consideration, for various classes of items. Another kind of expert rules enables the system to compute an estimate from the attribute value of another item provided that, in other respects, this latter item sufficiently resembles the item, the value of which we are interested in; then these expert rules are used either for controlling the analogical reasoning process or for enlarging the scope of application of the first kind of expert rules. The different approaches are discussed in the framework of possibility theory.     

Vinyl polymerization by metal complexes. XVIII. Kinetics of the polymerization of acrylonitrile initiated by imidazole-copper-(II) complexes

A study on the kinetics and mechanism of the polymerization of acrylonitrile initiated by imidazole and 2-substituted imidazole-copper-(II) complexes was made in dimethyl sulfoxide solution at 40–70°C. The rate of polymerization, Rp, could be expressed as follows: The overall activation energies of these polymerization processes are in a range from 14.2 to 69.1 KJ mole^-1. From the data of electronic spectra and electron paramagnetic resonance, it was confirmed that the polymerization in question could be initiated by free radicals which were formed by the reduction of copper-(II) complex to copper-(I) complex, and the latter formed a new complex with polyacrylonitrile resulted.     

Improvement in Thermoelectric Characteristics of n-type Iron Disilicide by Local Composition Modification

High thermoelectric figure of merit semiconducting ceramics of n -type iron disilicide with modified local compositions have been developed. Sintering and annealing of the composite powder composed of iron disilicide and precipitated cobalt (II) hydroxide resulted in the dissolution of excess Co and oxygen into the iron disilicide phase. Excess Co segregated to the grain boundary region, while interstitially incorporated oxygen was distributed homogeneously in the microstructure. The maximum figure of merit achieved was 5.2 × 10⁻⁴/K at 673 K.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.     

Physicochemical Study of Glycerol Hydrogenolysis Over a Ni–Cu/Al2O3 Catalyst Using Formic Acid as the Hydrogen Source

Glycerol hydrogenolysis to propanediols requires the use of hydrogen as reactant. One interesting option is to directly generate this hydrogen in active sites of the support using hydrogen donors, such as formic acid. The effect that the reacting pressure has on glycerol conversion and product selectivity over a Ni–Cu/Al₂O₃ catalyst was studied. The negative effect of decreasing the pressure was much more significant when the source of hydrogen was dissolved molecular hydrogen than when it was formic acid. X-ray photoelectron spectroscopy and temperature programmed reduction measurements were performed to understand the effect of Ni–Cu/Al₂O₃ reduction procedure on the catalytic activity. Semi-batch reactor studies with the Ni–Cu/Al₂O₃ catalyst were carried out with continuous addition of the hydrogen donor to obtain kinetic data. Langmuir–Hinshelwood type models were developed to describe the direct conversion of glycerol into propanediol, and propanediol further hydrogenolysis to 1-propanol. The model included the competitive adsorption between both glycols. These models were used to obtain valuable data for the optimization of the process.     

Effects of YSZ Additions on Thermoelectric Properties of Nb-Doped Strontium Titanate

The effect of yttria-stabilized zirconia (YSZ) with a low thermal conductivity on the thermoelectric properties of Nb-doped SrTiO₃ bulk materials, which were fabricated by the conventional normal pressure sintering method in an Ar atmosphere, was examined. YSZ additions reduced the thermal conductivity but significantly enhanced the electrical conductivity. However, the Seebeck coefficient was nearly independent of YSZ content. Thus, the ZT value was enhanced, and a sample with 3 wt.% YSZ displayed the maximum ZT value, 0.21, at 900 K. Additionally, the reason for the reduced thermal conductivity and enhanced electrical conductivity by YSZ additions was investigated in detail.