Physical model of drain conductance, gd, degradation ofNMOSFET's due to interface state generation by hot carrierinjection

Degradation of analog device parameters such as drain conductance, g_d, due to hot carrier injection has been modeled for NMOSFET's. In this modeling, mobility reduction caused by interface state generation by hot carrier injection and the gradual channel approximation were employed. It has been found that g_d degradation can be calculated from linear region transconductance, g_m, degradation which is usually monitored for hot carrier degradation of MOSFET's. The values of g_d degradation calculated from g_m degradation fit well to the measured values of g_d degradation The dependence of the g_d degradation lifetime on L_eff has been also studied, this model also provides an explanation of the dependence on L_eff. The model is then useful for lifetime predictions of analog circuits in which g_d degradation is usually more important than g_m degradation     

Simultaneous fabrication of a composite with low thermal expansion and high strength in the eucryptite — yttria-stabilized PSZ system

Low thermal expansion coefficient and high mechanical strength have been attained simultaneously in a composite with microstructures in which the low thermal expansion grains are surrounded by a continuous texture of the grains with high strength. Alloying eucryptite with yttria-stabilized PSZ (partially stabilized zirconia) simultaneously achieved the low thermal expansion coefficient, 1.45 × 10^–6, and the high bending strength, 220 MPa, by adjusting the composition and controlling the microstructures by changing the starting powders and the milling durations. Grain size and reactions between the coupled materials determined the critical processing conditions.     

Advanced endocrine cell carcinoma of the gallbladder: a patient with 12-year survival

Gallbladder carcinoid is a rare disease. In previous reports, classical carcinoid, an entity with a good prognosis, has not been distinguished from endocrine cell carcinoma, a tumor associated with marked cell atypia and mitosis, and a poor prognosis. The patient was a 66 year old woman who presented to our hospital with a chief complaint of jaundice. Pre-operatively, she was diagnosed as having advanced gallbladder carcinoma invading the liver and the hepatic hilus. The patient underwent right hepatic trisegmentectomy with en bloc resection of the caudate lobe and extrahepatic bile ducts, extended lymph node clearance and left hepaticojejunostomy. Histopathological examination showed positive Grimelius staining, marked mitosis, and intense atypism, hence, the tumor was diagnosed as an endocrine cell carcinoma. Twelve years after surgery, the patient is healthy, without any sign of recurrence. We present this novel case of long-term survival and review the literature.     

Physicochemical properties of rare earth perovskite oxides used as gas sensor material

The change of the conductivity in the rare earth perovskite oxide took place after the chemisorption of flammable gases. The sensitivity for methanol was highest. From the conductivity change of these perovskite oxides after the injection of methanol, the energy needed to promote an electron from a conducting to a nonconducting state, E=E _c-E _t, could be derived from the equation=A ₀ exp (–E/kT). LnCoO₃ had the smallest E and H (metal-O), which is the binding energy of oxygen coordinating to the metal ions, but exhibited the highest activity for gas sensing. The gas sensing mechanism was also considered.     

Efficient material design for diesel particulate filters

This paper will give an overview about the filter development for diesel particulate emission control in automotive applications. The material development for passenger car diesel particulate filters led to new materials like silicon carbide while for heavy duty applications still Cordierite plays a major role. But in the future other materials might also be used for passenger cars. This paper will show the basic difference between both applications and describe the material design in terms of filter properties (base material, back pressure aspects, filtration efficiency, coating impact). Current application on vehicles with catalysed soot filters (CSF) with and without oxidation catalyst will be presented. Furthermore an outlook will be given on materials for catalysed soot filters for the future.     

Synthesis and properties of poly (organophosphazenes) ionomers [NP(HNC6H5)2−(x+y)(HNC6H4SO3H) x (HNC6H4SO3Li) y ] n

Poly(anilino sulphamicphosphazenes) such as [NP(HNC₆H₅)_2–x (HNC₆H₄SO₃H) _x ] _n for polymer (I) x=0.3 and for polymer (II) x=0.8 were prepared by the reaction of poly(anilinophosphazene) [NP(HNC₆H₅)₂] _n and sulphonic chloride HSO₃Cl in tetrachloroethane solvent several timeS. Also, H protons in the polymer (I) and (II) were prepared from lithum hydroxide in aqueous solution. It was found, by chemical analysis, that the product prepared with (I) and (II) had compositions such as [NP(HNC₆H₅)_1.7 (HNC₆H₄SO₃H)_0.1(HNC₆H₄SO₃Li)_0.2] _n (III) and [NP(HNC₆H₅)_1.2(HN-C₆H₄SO₃Li)_0.8] _n (IV). Also, the resistivity of products (III) and (IV) were determined and found to be 3.3×10⁷ and 1.5×10⁷ cm^–1, respectively.     

Sieving of aerosol particles with metal screens

Metal screens with uniform micrometer-sized opening were employed to sieve aerosol particles by suppressing the adhesion of particles smaller than the openings. The collection efficiencies of monodispersed polystyrene latex (PSL) particles were experimentally determined using the metal screens with 1.2, 1.8, 2.5, and 4.2 μm openings at various filtration velocities. The particles smaller than the mesh opening adhered on the metal screen at a low filtration velocity, but the bounce-off of particles on the mesh surface suppressed the adhesion at a high velocity. As a result, we found that the adhesion of PSL particles larger than 0.3 μm mostly suppressed at a filtration velocity higher than 10 m s^?1 and therefore we can sieve aerosol particles according to the opening size of metal screens. We also found that the particle number concentration could be determined by measuring the increase in pressure drop since the clogging of metal screen openings takes place by the individual particles.

© 2016 American Association for Aerosol Research     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.     

Present Trends in High-Speed and Broad-Band Communications Services in Japan

This paper describes present trends in high-speed and broad-band communications services in Japan. It gives an overview of video, high-speed digital leased circuit and satellite digital communications services, and gives examples of their applications. Recent trends in telecommunication services and technology are described, including video conferencing services presently available in more than ten cities throughout Japan, as well as a video response system which is about to be put into service. It also describes the present status of Japan's cable television (CATV) system and discusses its future development. Finally, NTT's plans for high-speed and broad-band communications service in the future are previewed.     

Preoperative staging of endometrial carcinoma: diagnostic effect of T2-weighted fast spin-echo MR imaging

PURPOSE: To evaluate the usefulness of T2-weighted fast spin-echo magnetic resonance (MR) imaging with a 512 x 256 matrix for assessment of the preoperative stage of endometrial carcinoma. MATERIALS AND METHODS: Twenty-eight women with histopathologically proved endometrial carcinoma underwent preoperative T2-weighted fast spin-echo, dynamic T1-weighted fast spin-echo, and postcontrast T1-weighted spin-echo MR imaging with a phased-array surface coil. The uterine long-axis planes in each sequence were reviewed at separate sessions by three radiologists blinded to the histopathologic data. RESULTS: For the diagnosis of myometrial invasion, no statistically significant differences were found among T2-weighted imaging, dynamic imaging, and postcontrast T1-weighted imaging. For the diagnosis of deep myometrial invasion, T2-weighted and dynamic images showed higher specificity than postcontrast T1-weighted images (T2-weighted, 89%; dynamic, 88%; and postcontrast T1-weighted, 80%). For cervical invasion, T2-weighted and dynamic images showed larger areas under receiver operating characteristic curves than did postcontrast T1-weighted images (T2-weighted, 0.78; dynamic, 0.71; and postcontrast T1-weighted, 0.67). CONCLUSION: T2-weighted imaging is useful for identifying the stage of endometrial carcinoma.