Glass transition behavior of emulsion-polymerized polymer films containing a surface-active agent

The glass transition behavior of emulsion-polymerized poly(methyl methacrylate) and polystyrene films containing sodium laurylsulfate as emulsifier was studied by measurements of dynamic mechanical properties and thermal depolarization current. The film specimens of the emulsion-polymerized polymers were prepared by casting from their benzene solutions. The glass transition temperatures of the emulsion-polymerized films are higher than those of the bulk-polymerized films. The higher glass transition temperature of the emulsion-polymerized films is attributed to the colloidal properties of sodium laurylsulfate in the process of the film formation. The restriction of the molecular chains in the emulsion-polymerized films is attributed to the interaction between the hydrophobic groups of sodium laurylsulfate and the polymer molecules.     

A method to test whether a system is near failure

A method is presented for the identification of system states near system failure before its occurrence, from observations of component states. State vectors of components are classified into finite system states, based on two measures of the distance from system failure; the logical distance and the probabilistic distance. The method first obtains the Boolean function representing the structural relation between component states and system states classified by the logical distance and then computes the probabilistic distance of the current state vector from system failure.     

Effects of YSZ Additions on Thermoelectric Properties of Nb-Doped Strontium Titanate

The effect of yttria-stabilized zirconia (YSZ) with a low thermal conductivity on the thermoelectric properties of Nb-doped SrTiO₃ bulk materials, which were fabricated by the conventional normal pressure sintering method in an Ar atmosphere, was examined. YSZ additions reduced the thermal conductivity but significantly enhanced the electrical conductivity. However, the Seebeck coefficient was nearly independent of YSZ content. Thus, the ZT value was enhanced, and a sample with 3 wt.% YSZ displayed the maximum ZT value, 0.21, at 900 K. Additionally, the reason for the reduced thermal conductivity and enhanced electrical conductivity by YSZ additions was investigated in detail.     

Polyunsaturated fatty glyceride syntheses by microbial lipases

The degree of glyceride syntheses by lipase TOYO (Chromobacterium viscosum) and lipase OF (Candida cylindracea) using individual free fatty acids C_18∶1, C_18∶2, C_18∶3, C_18∶4, C_20∶4, C_20∶5 and C_22∶6 were compared. Lipase TOYO incorporated each of the fatty acids into glycerol at levels of greater than 89%. Lipase OF incorporated most of the fatty acids at levels above 70% (docosahexaenoic acid incorporation was 63%). It was concluded that these two lipases are feasible for producing glycerides from unsaturated fatty acids.     

Synthesis of terpene alcohols from isoprene oligomers

Various terpene alcohols were prepared from isoprene oligomers via two steps: epoxidation with peracetic acid and isomerisation with aluminium triisopropoxide. For example, 2-methylene-6-methyl-7-octene-1-o1 was prepared from 2,6-dimethyl-1,7-octadiene. From 2,6-dimethyl-2,7-octadiene, 3,3,6-trimethyl-1,5-heptadiene, 2,7-dimethyl-2,6-octadiene, 2,6-dimethyl-1,3,6-octatriene, 1-methyl-4-isopropenyl-1-cyclohexene, and 1,5-dimethyl-1,5-cyclooctadiene, the corresponding alcohols were obtained, respectively.     

High-sensitivity determination of graft ratio of maleic anhydride-grafted polyolefin by anhydride methylation in supercritical methanol followed by H NMR spectroscopy

A wide range of graft ratios in Maleic anhydride (MA)-grafted polyolefin (PO), MA-g-PO, was determined by the combination of the methylation of grafted MA in supercritical methanol with quantification by ¹H NMR spectroscopy. The combination enabled the determination of a graft ratio as low as 0.01 wt% (100 ppm) in MA-g-PO.     

Development of µGC (micro gas chromatography) with high performance micromachined chip column

A micro gas chromatography (µGC) instrument applying a high performance chip column fabricated on a silicon wafer was developed. Experimental results of the chip column and protyping of a µGC instrument are described. Approximately 35 000 theoretical plates were generated with the chip column coated liquid phase (5% phenyl-/95% dimethyl-polysiloxane). The theoretical plates of the chip column were close to those of the capillary column. Experimental minimum height equivalent to a theoretical plate (HETP, H_min) of the chip column was 1.2 times higher than the calculated H_min. A prototype µGC applying the chip column was developed. The µGC generated approximately 35 000 theoretical plates, similar to the theoretical plates obtained by a commercial GC instrument. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Density-Functional Theoretical Study on the Role of Lewis and Brønsted Acid Sites on CeO2(110) Surfaces for Nitrile Hydration

Hydration of cyanopyridine on CeO₂(110) surfaces was studied using periodic DFT+U calculations. One of two adsorption modes of 2-cyanopyridine occurs with two-point interaction which causes substrate specificity. A catalytic cycle for the hydration of 2-cyanopyridine was proposed. Cooperativity of Lewis and Brønsted acid sites was found to stabilize the intermediates for the hydration.