Parathion degradation and toxicity reduction in solar photocatalysis and photolysis.

The solar photocatalytic degradation of methyl parathion was investigated using a circulating TiO2/solar light reactor. Under solar photocatalysis condition, parathion was more effectively degraded than solar photolysis and TiO2-only conditions. With solar photocatalysis, 20 mg/L of parathion was completely degraded within 60 min with a TOC decrease of 63% after 150 min. The main ionic byproducts during photocatalysis recovered from parathion degradation were mainly as NO3-, NO2- and NH4+, 80% of the sulphur as SO4(2-), and 5% of phosphorus as PO4(3-). The organic intermediates 4-nitrophenol and methyl paraoxon were also identified, and these were further degraded in solar photocatalytic condition. Two different bioassays (Vibrio fischeri and Daphnia magna) were used to test the acute toxicity of solutions treated by solar photocatalysis and photolysis. The Microtox test using V. fischeri showed that the toxicity expressed as EC50 (%) value increased from 5.5% to >82% in solar photocatalysis, indicating that the treated solution is non-toxic, but only increased from 4.9 to 20.5% after 150 min in solar photolysis. The acute toxicity test using D. magna showed that EC50 (%) increased from 0.05 to 1.08% under solar photocatalysis, but only increased to 0.12% after 150 min with solar photolysis, indicating the solution is still toxic. The pattern of toxicity reduction parallels the decrease in TOC and the parathion concentrations.     

Service-oriented smart home applications: composition, code generation, deployment, and execution

A smart home usually has a variety of devices or home appliance, instead of designing software for a specific home, this paper proposes a service-oriented framework with a set of ontology systems to support service and device publishing, discovery of devices and their services, composition of control software using existing control services that wrap devices, deployment, and execution of the composed service in an computing environment, monitoring the execution, and recovery from device failure. The ontology systems specify semantic information about devices, services, and workflows used in various smart home, and users can compose and recompose services for their specific needs. New devices, workflows, and services can be added into ontology. Most of the steps in this process can be automated including code generation. For example, service composition will be carried out in three steps: abstract workflow design, function construction, and device discovery, and different codes can be generated for different computing platforms such as Java and Open Services Gateway initiative environments. In this way, a variety of smart home can be constructed rapidly using the framework by discovery and composition using existing services and workflows. This paper illustrates this framework using a media control example to illustrate the ontology, discovery, composition, deployment, execution, monitoring, and recovery.     

Direct equivalence between geometric conditions and algebraic conditions for discrete-time nonlinear observer

Unlike the continuous-time case, algebraic necessary and sufficient conditions for a single output discrete-time system to be state equivalent to a nonlinear observer canonical form have been found and are easier to verify for those who are not accustomed to differential geometry. The geometric conditions look very different from the algebraic conditions. In this paper, we show direct equivalence of the geometric conditions and the algebraic conditions in order to enhance the understanding of the geometric conditions.     

Application of a microbial toxicity assay for monitoring treatment effectiveness of pentachlorophenol in water using UV photolysis and TiO2 photocatalysis

Conventional approaches for monitoring the effectiveness of wastewater treatment processes include evaluating the degradation of the target compound and/or generation of its nontoxic byproducts. These approaches are, however, limited because routine chemical analyses alone are neither able to fully address potential hazard to biological receptors nor characterize potential synergistic interactions. This study was carried out to investigate the degradation effectiveness of pentachlorophenol (PCP) by treatment with UV-A, UV-B photolysis, sunlight, TiO(2) photocatalysis, and/or their combinations. Chemical analyses of the parent compound and its selected byproducts, as well as acute toxicity assessment using the luminescent bacteria Vibrio fischeri (Microtox), were conducted during and after the various photolytic and photocatalytic treatments. In general, the toxicity reduction pattern observed after treatment corresponded well with the chemical degradation data. However, it should be noted that there were occasions that acute microbial toxicity was observed even from the treated water samples, some of which showed complete removal of the parent compound. This post-treatment toxicity might be due to toxic PCP byproducts, which may include polychlorinated dibenzodioxins/furans, tetrachloro-p-benzoquinone, and other intermediates. The TiO(2) photocatalysis with UV-B photolysis was the most effective method to remove both PCP and its toxic derivatives in the water. The Microtox assay is an easy to use and promising approach for evaluating the effectiveness of wastewater treatment processes.     

Optimization of carbamazepine removal in O3/UV/H2O2 system using a response surface methodology with central composite design

This study used an ozone/ultraviolet/hydrogen peroxide (O₃/UV/H₂O₂) system to remove carbamazepine (CBZ) from water using a second-order response surface methodology (RSM) experiment with a five-level full-factorial central composite design (CCD) for optimization. The effects of both the primary and secondary interactions of the photocatalytic reaction variables, including O₃ concentration (X₁), H₂O₂ concentration (X₂), and UV intensity (X₃), were examined. The O₃ concentration significantly influenced CBZ and total organic carbon (TOC) removal as well as total inorganic nitrogen ion production (T-N) (p < 0.001). However, CBZ, TOC removal, and T-N production were enhanced with increasing O₃ and H₂O₂ concentrations up to certain levels, and further increases in O₃ and H₂O₂ resulted in adverse effects due to hydroxyl radical scavenging by higher oxidant and catalyst concentrations. UV intensity had the most significant effect on T-N production (p < 0.001). Complete removal of CBZ was achieved after 5 min. However, only 34.04% of the TOC and 36.99% of T-N were removed under optimal concentrations, indicating formation of intermediate products during CBZ degradation. The optimal ratio of O₃ (mg L^? 1): H₂O₂ (mg L^? 1): UV (mW cm^? 2) were 0.91:5.52:2.98 for CBZ removal, 0.7:18.93:12.67 for TOC removal, and 0.94: 4.85:9.03 for T-N production, respectively.     

Deburring of burrs in spring collets by abrasive flow machining

Micro burrs occurring inside the small and large diameters adversely affect the properties of products. Manual deburring of micro burrs in particular damages the processed surface and reduces production efficiency. In this study, spring collets made of chrome-molybdenum are used to test the deburring of the surface of collets including crossed micro grooves by abrasive flow machining. This revised version was published online in October 2004 with a correction to the issue number.     

Estimating Pollutant Mass Accumulation on Highways during Dry Periods

For determining the accumulated pollutant mass on highways, two years of monitoring data were used from eight highway sites in southern California. Buildup over antecedent dry days was calculated from mass washed off from the following storm and retained pollutant mass. Mass accumulation rates were determined for total suspended solids (TSS), chemical oxygen demand (COD), oil and grease, total Kjeldahl nitrogen, and total phosphorus, and are reported in g/m2-day. A revised buildup model is proposed using an alternative modeling approach to describe buildup during dry days between storms. The result shows that, between 1 and 10 antecedent dry days, the pollutant mass buildup rates are determined to be 0.544?g/m2-day for TSS, 0.114?g/m2-day for COD, and 0.0113?g/m2-day for oil and grease. Buildup rates decline in subsequent periods rates decreased by 79% for TSS, 78% for COD, and 61% less for oil and grease in the following 10–70?day period.     

Removal of 1,4-dioxane from water using sonication: effect of adding oxidants on the degradation kinetics

This research investigates the effect of adding oxidants such as Fe0, Fe2+ and S2O8(2-) in the sonication of 1,4-dioxane (1,4-D). The results indicate that the degradation pattern of 1,4-D kinetically could be divided into three steps (initiation, acceleration, and stabilization), with the first two steps predominating. The initiation step agreed with zero order rate model, while the acceleration step was the pseudo-first order. In the presence of HCO3- as a radical scavenger, the degradations of 1,4-D and TOC were suppressed, indicating that OH radical is an important factor in the sonolysis, especially at the acceleration step. The overall degradation efficiency of 79.0% in the sonolysis of 1,4-D was achieved within 200 min. While Fe0, Fe2+ and S2O8(2-) were individually combined with sonication, the total degradation efficiency of 1,4-D increased 18.6%, 19.1% and 16.5% after 200 min, respectively. The addition of oxidants not only increased the rate constant in the acceleration step, but also changed the kinetic model from zero to pseudo-first order at the initiation step. The addition of oxidants such as Fe2+, Fe0 and S2O8(2-) in the sonication of 1,4-D also improved the mineralization of 1,4-D. However, the degradation efficiencies of 1,4-D and TOC were not statistically different (p = 0.709, ANOVA) with different oxidants such as Fe2+, Fe0 and S2O8(2-).     

Characteristics of litter waste in highway storm runoff.

Litter characterization is an integrated part of the Caltrans First Flush Characterization Study. These data will provide a basis to develop potential treatment technologies and best management practices to control pollutants in runoff from freeways. During monitoring periods in Southern California areas, the first flush phenomenon was evaluated and the impacts of various parameters such as rain intensity, drainage area, peak flow rate, and antecedent dry period on litter volume and loading rates were evaluated. First flush phenomenon was generally observed for litter concentrations, but was not apparent with litter mass loading rates. Total captured gross pollutants, defined as larger than 0.5 cm, was 90% vegetation with only 10% being litter. The normalized cumulative litter loadings were determined from 1.25 to 13.39 kg/ha for dry litter weight and 0.40 to 8.99 kg/ha for dry biodegradable litter weight. The portions of biodegradable litter to non-biodegradable litter were roughly the same across the entire event. Event mean concentrations were ranged 0.0021 to 0.259 g/L for wet gross pollutants, 0.0001 to 0.027 g/L for wet litters and 0.00007 to 0.018 g/L for dry litters. The mass emission rates should be useful to estimate total litter production for developing total maximum daily loads.     

Effects of ultraviolet intensity and wavelength on the photolysis of triclosan.

The effects of ultraviolet (UV) intensity and wavelength on triclosan (TCS) photodegradation kinetic, efficiency, mechanisms and pathway were studied. The TCS photodegradation followed the pseudo-first order kinetic model at all UV intensities examined at the wavelengths of 254 and 365 nm and the photodegradation rate increased with increasing UV intensity. TCS photodegradation efficiencies of 90 to 98% and 79 to 90% were obtained at the wavelengths of 254 and 365 nm, respectively. TCS was degraded mainly by photon induced hydroxyl radicals while the direct photon reaction with TCS played a subordinate role. Chlorophenol, dichlorophenol and phenol were the intermediates detected in all experiments conducted. Dibenzodichloro-p-dioxin and dibenzo-p-dioxin were observed as the intermediates only at lower UV intensities investigated at the wavelength of 365 nm. Based on these intermediates, a complete TCS photolysis pathway was proposed for the first time.