Ionic requirements for the active ileal bile salt transport system

A new system of surface-induced profound hypothermia for infant cardiac operations has been developed in order to overcome problems inherent in the current techniques using crushed ice, water baths, and similar methods. The hypothermic chamber consists of two parts: a lower part, containing a refrigeration unit and a blower fan capable of lowering the air temperature in the chamber to -6 degrees C, and an upper part made of Plexiglas that has a completely detachable end to allow easy access to cannulas, the anesthesia hose, and the infant. A temperature panel recorder to monitor the infant's esophageal and rectal temperatures and the ambient chamber temperature is incorporated into the unit. Following evaluation in the animal laboratory, the hypothermic chamber has been successfully used in 10 infants without any complications attributable to the technique. This method provides a rapid and uniform drop of the body temperature and even skin cooling, eliminates the possibility of contact skin lesions, saves medical and paramedical personnel time in preparation of the infant and equipment, and allows observation of the child during the cooling phase. This hypothermic chamber has facilitated infant hypothermic operations.     

Synthesis of conjugated bile acids by means of a peptide coupling reagent

The conditions for the preparation of conjugated bile acids by means of N-ethoxycarbonyl-2-ethoxy-1,2-dihydroquinoline are described. Conjugation is obtained in one step via the intermediary formation of mixed carbonic-carboxylic acid anhydrides.     

Urinary 6-sulfatoxymelatonin cycle-to-cycle variability

For either clinical or research purposes, the timing of the nocturnal onset in production of the urinary melatonin metabolite 6-sulfatoxymelatonin (UaMT6s-onset), has been proposed as a reliable and robust marker of circadian phase. However, given that most circadian rhythms show cycle-to-cycle variability, the statistical reliability of phase estimates obtained from a single study using UaMT6s-onset remains to be determined. Following 2 weeks of sleep diary and wrist actigraphy, 15 young, healthy good sleepers participated in four UaMT6s sampling sessions spaced 1 day apart. During the sampling sessions subjects remained indoors under low light conditions and hourly urine samples were collected from 19:00 to 02:00 h. Samples were subsequently assayed for UaMT6s using standard radioimmunographic techniques. UaMT6s-onset was determined by the time at which melatonin production exceeded the average of three proceeding trials by 100%. Sleep onset times were derived from sleep diary and actigraphic measures taken before the melatonin collection nights. We found that there was no significant variation between nights in group mean UaMT6s-onset times, and intraindividual variability was small. In addition, UaMT6s-onset times were highly and significantly correlated between nights (grand mean r = 0.804). Our results suggest that within 95% confidence interval limits, individual UaMT6s-onset estimates obtained from a single night UaMT6s-onset study can be used to predict subsequent UaMT6s-onset times within +/- 97 min. A close temporal relationship was also found between the timing of UaMT6s-onset and sleep onset. Overall, our results suggest that under entrained conditions single-session UaMT6s-onset studies can provide reliable individual UaMT6s-onset phase estimates and that the protocol described in this study is a practical and noninvasive methodology.     

Numerical simulation of reactive injection molding in a radial flow geometry

The radial flow of a chemically reactive fluid between two parallel circular disks during the process of Reactive Injection Molding (RIM) has been simulated in a decelerative, non-isothermal, transient flow environment. The effects of key operating and system parameters (feed temperature, volumetric flow rate, reaction rate, and cavity thickness) on velocity, conversion, and temperature profiles which occur in this decelerative flow environment were determined. A catalyzed, unfilled polyurethane RIM system was modeled by a linear step polymerization scheme using average literature values for the reaction rate, and thermodynamic and constitutive parameters. The numerical solution was achieved using the method of lines and upwind approximations of the spatial derivatives. The geometry studied (two parallel, center gated circular disks) models flow patterns in commercial RIM processes more realistically than the rectangular flow between two parallel surfaces (studied by previous workers) in which the average velocity is constant along the length of the mold. This simulation predicts the accumulation of high polymer near the entrance to the mold and near the outer edge of the cavity in fast reactive systems. The accumulation of material near the gate results in viscous heat generation and a maximum in temperature in the region immediately downstream from the restriction.     

Absorption Enhancement of Coated Absorbing Aerosols: Validation of the Photo-Acoustic Technique for Measuring the Enhancement

A photo-acoustic absorption spectrometer (PAS) and a cavity ring down aerosol extinction spectrometer (CRD-AES) were used, in conjunction with Mie Theory, to measure the refractive index (RI) of absorbing polystyrene spheres (APSS). The PAS and CRD-AES were also used to measure the absorption and extinction enhancement after these APSS were coated in oleic acid. The experimental enhancements were then compared to predictions from coated-sphere Mie Theory. The measured absorption and extinction enhancements both agreed with modeled enhancements to within an average of 5%. A filter-based absorption technique (particle soot absorption photometer, PSAP) was also used to measure the absorption by the APSS and showed a significant size-dependent bias, as evidenced by the filter-based method measuring significantly lower absorption for both uncoated and coated APSS compared to the PAS. These results suggest the validity of applying photo-acoustics to measure the absorption enhancement created by semi-volatile atmospheric species coating absorbing particles.     

Restriction categories I: categories of partial maps

Given a category with a stable system of monics, one can form the corresponding category of partial maps. To each map in this category there is, on the domain of the map, an associated idempotent, which measures the degree of partiality. This structure is captured abstractly by the notion of a restriction category, in which every arrow is required to have such an associated idempotent. Categories with a stable system of monics, functors preserving this structure, and natural transformations which are cartesian with respect to the chosen monics, form a 2-category which we call . The construction of categories of partial maps provides a 2-functor . We show that can be made into an equivalence of 2-categories between and a 2-category of restriction categories. The underlying ordinary functor of the above 2-functor turns out to be monadic, and, from this, we deduce the completeness and cocompleteness of the 2-categories of -categories and of restriction categories. We also consider the problem of how to turn a formal system of subobjects into an actual system of subobjects. A formal system of subobjects is given by a functor into the category of semilattices. This structure gives rise to a restriction category which, via the above equivalence of 2-categories, gives an -category. This -category contains the universal realization of the given formal subobjects as actual subobjects.