Effects of solvents on electrospun polymeric fibers: preliminary study on polystyrene

Six solvents [acetic acid, acetonitrile, m‐cresol, toluene, tetrahydrofuran (THF) and dimethylformamide (DMF)] with different properties (eg density, boiling point, solubility parameter, dipole moment and dielectric constant) were used to prepare electrospun polystyrene (PS) fibers. Fiber diameters were found to decrease with increasing density and boiling point of the solvents. A large difference between the solubility parameters of PS and the solvent was responsible for the bead‐on‐string morphology observed. Productivity of the fibers (the numbers of fiber webs per unit area per unit time) increased with increasing dielectric constant and dipole moment of the solvents. Among the solvents studied, DMF was the best solvent that provided PS fibers with highest productivity and optimal morphological characteristics. The beadless, well‐aligned PS fibers with a diameter of ca 0.7 µm were produced from the solution of 10 % (w/v) of PS in DMF at an applied electrostatic field of 15 kV/10 cm, a nitrogen flow rate of 101 ml min^?1 and a rotational speed of the collector of 1500 rev min^?1. Copyright © 2004 Society of Chemical Industry     

Effect of processing parameters on the vulcanisation of natural rubber using glutaraldehyde

The process ability of vulcanising natural rubber using glutaraldehyde at low temperature has been studied. The main objective of this work is to improve the properties and stability of natural rubber (NR) using glutaraldehyde as a curing agent. In this study, the vulcanised samples were prepared systematically and compared with sulphur cured natural rubber vulcanisates. The influence of mole ratio of ammonia and glutaraldehyde, and the processing parameters (i.e. curing time and temperature) was investigated. The cured NR based on glutaraldehyde exhibited better hardness and thermal properties than that of the NR cured from conventional sulphur system. The experimental results reveal that the properties of glutaraldehyde cured NR can be developed with the proper additives combination and conditions adopted in the preparation. This cured system is very interesting due to it can be used for high temperature industrial applications. Moreover, it eases of processing at low temperature and cost.     

Influence of functional groups on properties of styrene grafted NR using glutaraldehyde as curing agent

Natural rubber grafted polystyrene (NR‐g‐PS) and natural rubber grafted polystyrene‐co‐methyl methacrylate (NR‐g‐P(S‐co‐MMA)) were prepared by emulsion polymerization technique using tert‐BuHP‐TEPA as a redox initiator to improve the thermal and mechanical stability of NR. Additional peaks appear in the Fourier‐transform infrared spectra at 695 and 1,732 cm^?1 confirms the formation of graft polymerization. The existence of functional groups on the grafted NR was also clearly confirmed from the morphology obtained from transmission electron microscopy analysis. The effect of curing on the mechanical and thermal properties of grafted NR has also been studied. Glutaraldehyde was used as the curing agent for the grafted and ungrafted NRs throughout the entire course of investigation. It was found that curing of grafted NR samples enhanced tensile strength, modulus, hardness, and thermal stability. Grafted NR showed the tensile strength values of 12 and 17 MPa for NR‐g‐PS and NR‐g‐P(S‐co‐MMA), respectively. Enhancement in thermal stability of NR was confirmend from the activation energy of degradation calculated based on thermogravimetric analyzer. The value of activation energy for NR (135.13 kJ/mol) was found to be increased to 147.89 kJ/mol (NR‐g‐PS) and 151.6 kJ/mol (NR‐g‐P(S‐co‐MMA)). The overall properties of NR have been strongly affected by the interaction and chain bundling between functional groups present in the grafted copolymer and the unsaturated chains in its structure. J. VINYL ADDIT. TECHNOL., 25:339–346, 2019. © 2019 Society of Plastics Engineers     

Telomere Shortening and Increased Oxidative Stress in Lumbar Disc Degeneration

Lumbar disc degeneration (LDD) contributes to low back pain. This study aimed to determine relative telomere length (RTL), oxidative stress status, and antioxidant levels and examine the relationships between RTL, oxidative stress, and the severity in LDD patients. A total of 100 subjects, 50 LDD patients and 50 healthy controls, were enrolled in the case–control study. Blood leukocyte RTL was analyzed using quantitative real-time polymerase chain reaction. Lipid peroxidation was determined by malondialdehyde (MDA) assay. Plasma 8-hydroxy 2′-deoxyguanosine (8-OHdG) values were determined using enzyme-linked immunosorbent assay. Total antioxidant capacity (TAC) and ferric reducing antioxidant power (FRAP) in plasma were also measured. The LDD patients had significantly shorter telomeres than the healthy controls (p = 0.04). Blood leukocyte RTL was inversely correlated with the LDD severity (r = −0.41, p = 0.005). Additionally, plasma MDA and 8-OHdG levels were markedly greater in LDD patients than in the controls (p = 0.01 and p = 0.002, respectively). Furthermore, the plasma MDA level showed a positive correlation with the radiographic severity (r = 0.49, p = 0.001). There was a positive correlation between plasma 8-OHdG and the severity (r = 0.60, p < 0.001). Moreover, plasma TAC and FRAP levels were significantly lower in LDD patients than in the controls (p = 0.04). No significant differences in plasma TAC and FRAP were observed among the three groups of LDD severity. We found that RTL was negatively correlated with the severity while plasma MDA and 8-OHdG levels were positively correlated with the severity. These findings suggest that blood leukocyte RTL, plasma MDA, and 8-OHdG may have potential as noninvasive biomarkers for the assessment of severity in LDD.     

Epigallocatechin-3-Gallate Protects Pro-Acinar Epithelia Against Salivary Gland Radiation Injury

Antioxidant agents are promising pharmaceuticals to prevent salivary gland (SG) epithelial injury from radiotherapy and their associated irreversible dry mouth symptoms. Epigallocatechin-3-gallate (EGCG) is a well-known antioxidant that can exert growth or inhibitory biological effects in normal or pathological tissues leading to disease prevention. The effects of EGCG in the various SG epithelial compartments are poorly understood during homeostasis and upon radiation (IR) injury. This study aims to: (1) determine whether EGCG can support epithelial proliferation during homeostasis; and (2) investigate what epithelial cells are protected by EGCG from IR injury. Ex vivo mouse SG were treated with EGCG from 7.5–30 µg/mL for up to 72 h. Next, SG epithelial branching morphogenesis was evaluated by bright-field microscopy, immunofluorescence, and gene expression arrays. To establish IR injury models, linear accelerator (LINAC) technologies were utilized, and radiation doses optimized. EGCG epithelial effects in these injury models were assessed using light, confocal and electron microscopy, the Griess assay, immunohistochemistry, and gene arrays. SG pretreated with EGCG 7.5 µg/mL promoted epithelial proliferation and the development of pro-acinar buds and ducts in regular homeostasis. Furthermore, EGCG increased the populations of epithelial progenitors in buds and ducts and pro-acinar cells, most probably due to its observed antioxidant activity after IR injury, which prevented epithelial apoptosis. Future studies will assess the potential for nanocarriers to increase the oral bioavailability of EGCG.