Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

Ratcheting limit of flat end cylindrical shell connections under internal pressure

Progressive plastic deformation, or ratcheting, is a failure mechanism in ductile structures usually associated with non-proportional actions. In the case of cylindrical shell flat end connections, with or without opening, ratcheting may occur under the action of cyclically varying pressure from zero to a maximum value, i.e. for single action and, therefore, proportional loading. In this paper the ratcheting limits for this connection under this loading and for two different models are given, for an ideal-elastic ideal-plastic constitutive law, Mises' yield condition and associated flow law. The results are compared with each other and with the limits for global plastic deformation given in the literature.     

Reliability of local area networks with bus and ring topologies

The reliability of local area networks with bus and ring topologies with a simple transfer medium are critically analysed. A double transfer medium is used to increase reliability. The efficiencies of these approaches are compared.     

Modeling time criticality of information

In this paper, we continue the research on formal treatment of attributes of information, based on the computational approach. In this scenario, the usefulness of advisory information is measured by the decrease in complexity of a problem we need to solve. We propose to model the time criticality via usefulness of a piece of information which is received during the computation. As a modeling tool, we use deterministic finite automata.     

Strukturaufklärung cyclischer Fettsäuremethylester V: Massenspektrometrie isomerer Phenylundecansäure-methylester

Elucidation of Structure of the Methyl Esters of Cyclic Fatty Acids V: Mass-Spectrometry of Isomeric Methyl Esters of Phenyl Undecanoic Acid Isomeric phenyl undecanoic acids obtained by the Friedel-Crafts reaction of benzene with 10-undecenoic acid were investigated as methyl esters using capillary gas-chromatography – mass spectrometry (GC-MS). The isomers could be identified as methyl esters of (5-), 6-, 7-, 8-, 9- and 10 phenyl undecanoic acids. The fragmentation due to electron bombardment is discussed.     

Die massenspektrometrische Fragmentierung von Neopentylpolyolestern III Neopentylglycoldifettsäureester

Mass Spectrometric Fragmentation of Neopentylpolyolesters, Part III: Fatty Acid Diesters of Neopentylglycole The fragmentation of the homologous fatty acid diesters of neopentylglycole (C₂ to C₁₈) upon electron impact was investigated. Main fragments arise by M-RCOO and M-RCOOH. Cyclic acetal structures for these ions are postulated. Subsequent fragmentation was elucidated by DADI-measurements and high resolution measurements. The influence of the length of the fatty acid chain upon the fragmentation is discussed. Esters of branched fatty acids can be distinguished from esters of n-fatty acids by characteristic ions.     

Massenspektrometrische Untersuchung von dimeren Fettsäuren aus einem thermisch und oxydativ belasteten Bratfett

Mass Spectrometric Investigation of Dimeric Fatty Acids from Frying Fats Subjected to Thermal and Oxidative Action Methyl esters of dimers from peanut oil subjected to thermal and oxidative action in an industrial frying plant were isolated by column chromatography and investigated by mass spectrometry. Di-unsaturated bicyclic and tetra-unsaturated acyclic structures were found to be the main components of the dimers. Dimers of very similar composition were synthesized. The mechanism of dimer formation is discussed.     

Analysis of Alkylbenzenes by Capillary Gas Chromatography

Suitable operating conditions are shown for GC separation of linear alkylbenzene (AB) samples on capillary columns. Retention data on SE-30 of n-phenylalkanes C₉-C₁₆ were measured and separation factors for n-phenylalkanes isomers were calculated. For quantitative evaluation from peaks areas of n-phenylalkanes, correction coefficients were calculated. By statistical evaluation of errors, standard deviations and further statistical parameters were calculated, showing GC method as sufficiently accurate and reliable. From results of collaborative testing of the GC procedure for quantitative AB analysis, some recommendations followed, esp. for application of capillary columns with apolar thermostable stationary phase only, with advantage under temperature programming, applying reduced sample volume at limited FID attenuation. It must be pointed out, this method is strictly limited for linear AB.     

Grinding induced effects in plasma sprayed zirconia coatings

The effect of grinding on the surface layer properties of ceria and yttria partially stabilized zirconia plasma-sprayed coatings (CePSZ, YPSZ, respectively) has been studied by X-ray diffraction methods. For this purpose, the modified model of line broadening analysis has been derived. The model considers elastic anisotropic properties along with more random paracrystal imperfections, both affecting X-ray line broadening. Grinding-induced microstructural changes were also studied using an estimation from the quantitative Orientation Distribution Function (ODF) texture. It was concluded, based on this work, that CePSZ ceramic is less mechanically stable compared to YPSZ. Consequently, more beneficial mechanical properties of a ground surface layer can be expected for CePSZ plasma-sprayed coatings.     

Hydrophilic polycarbonate chips for generation of oil-in-water (O/W) and water-in-oil-in-water (W/O/W) emulsions

Modification of the surfaces of polycarbonate (PC) with the use of a solution of tin (II) chloride renders them hydrophilic. The surface draping is stable against exposure to water and to alcohols. Exposure to alkanes reduces but does not diminish the effect. The method is compatible—in using the same solvent and temperature—with the hydrophobic modification of PC Jankowski et al. ( Lab Chip 11:748–752, 2011). The combination of these methods makes it possible to generate single and multiple monodisperse emulsions with the use of flow-focusing junctions in systems made in PC—material that is suitable for fabrication of multilayer, high throughput microfluidic devices.