Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.     

Discrete modeling of sand–tire mixture considering grain-scale deformability

Mixing sand or soil with small pieces of tire is common practice in civil engineering applications. Although the properties of the soil are changed, it is environmentally friendly and sometimes economical. Nevertheless, the mechanical behavior of such mixtures is still not fully understood and more numerical investigations are required. This paper presents a novel approach for the modeling of sand–tire mixtures based on the discrete element method. The sand grains are represented by rigid agglomerates whereas the tire grains are represented by deformable agglomerates. The approach considers both grain shape and deformability. The micromechanical parameters of the contact law are calibrated based on experimental results from the literature. The effects of tire content and confining pressure on the stress–strain response are investigated in detail by performing numerical triaxial compression tests. The main results indicate that both strength and stiffness of the samples decrease with increasing tire content. A tire contact of 40% is identified as the boundary between rubber-like and sand-like behavior.     

Spectral characterization and ASTER-based lithological mapping of an ophiolite complex: A case study from Neyriz ophiolite, SW Iran

The Neyriz ophiolite occurs along the Zagros suture zone in SW Iran, and is part of a 3000-km obduction belt thrusting over the edge of the Arabian continent during the late Cretaceous. This complex typically consists of altered dunites and peridotites, layered and massive gabbros, sheeted dykes and pillow lavas, and a thick sequence of radiolarites. Reflectance and emittance spectra of Neyriz ophiolite rock samples were measured in the laboratory and their spectra were used as endmembers in a spectral feature fitting (SFF) algorithm. Laboratory spectral reflectance measurements of field samples showed that in the visible through shortwave infrared (VNIR-SWIR) wavelength region the ultramafic and gabbroic rocks are characterized by ferrous-iron and Fe, MgOH spectral features, and the pillow lavas and radiolarites are characterized by spectral features of ferric-iron and AlOH. The laboratory spectral emittance spectra also revealed a wide wavelength range of SiO spectral features for the ophiolite rock units. After continuum removal of the spectra, the SFF classification method was applied to the VNIR + SWIR 9-band stack, and to the 11-band data set of SWIR and TIR data sets of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor, using field spectra as training sets for evaluating the potential of these data sets in discriminating ophiolite rock units. Output results were compared with the geological map of the area and field observations, and were assessed by the use of confusion matrices. The assessment showed, in terms of kappa coefficient, that the SFF classification method with continuum removal applied to the SWIR data achieved excellent results, which were distinctively better than those obtained using VNIR + SWIR data and TIR data alone.     

Effect of Mentha spicata L. and Mentha aquatica L. essential oils on the microbiological properties of fermented dairy product,kashk

The antibacterial activity of Mentha spicata and Mentha aquatica essential oils (EO) was tested against Staphylococcus aureus, Lactobacillus reuteri, Bifidobacterium animalis and Clostridium perfringens using agar well and disc diffusion techniques. Results showed that M. spicata EO had the highest inhibition activity against the studied microorganisms. Then, the antibacterial activity of both EO at 1500 and 2500 ppm was examined in industrial liquid kashk during the storage at 4 °C for 20 days. Both EO reduced the S. aureus viable count below 5 log CFU g^?1 after 4 days; however, the population of C. perfringens, L. reuteri and B. animalis decreased <1 log CFU g^?1 during the storage time. The least deteriorative effect on the lactic acid bacteria was related to M. aquatica. As revealed by organoleptic studies, kashk samples containing M. aquatica EO at 1500 and 2500 ppm were the most preferred samples.     

CEDAR: Modeling impact of component error derating and read frequency on system-level vulnerability in high-performance processors

Reliability of the current microprocessor technology is seriously challenged by radiation-induced soft errors. Accurate Vulnerability Factor (VF) modeling of system components is crucial in designing cost-effective protection schemes in high-performance processors. Although Statistical Fault Injection (SFI) techniques can be used to provide relatively accurate VF estimations, they are often very time-consuming. Unlike SFI techniques, recently proposed analytical models can be used to compute VF in a timely fashion. However, VFs computed by such models are inaccurate as the system-level impact of soft errors is overlooked.     

Attitude of Iranian physicians and nurses toward a clinical decision support system for pulmonary embolism and deep vein thrombosis

This research project sought to design and implement a computerized clinical decision support system (CDSS) that was able to identify patients who were at risk of pulmonary embolism (PE) and deep vein thrombosis (DVT), as well as produce reminders for prophylactic action for these diseases. The main purpose of the CDSS was to attempt to reduce the morbidity and mortality caused by embolism and thrombosis in patients admitted to hospitals. After implementation of this system in one of the large educational hospitals of Iran, a standard questionnaire was used, and interviews were conducted with physicians and nurses to evaluate the performance of the designed system for reducing the incidence of pulmonary embolism and thrombosis. From physicians and nurses’ point of view, a system which assists the medical staff in making better decisions regarding patient care, and also reminds pulmonary embolism and thrombosis preventive procedures with timely warnings, can influence patient care quality improvement and lead to the improved performance of the medical staff in preventing the incidence of pulmonary embolism and thrombosis.     

Maximum dry density test to quantify pumice content in natural soils

Crushable volcanic soils are well-known for their distinctive texture, vesicular nature and grain fragility. These features of volcanic soils lead to difficulty in interpreting the results of laboratory and field testing because of the occurrence of particle crushing. Sands containing pumice particles are commonly found in the Hamilton Basin in the North Island of New Zealand. The pumice particles originated from a series of volcanic eruptions centered in the Taupo and Rotorua regions. As a result of flooding and erosion along the Waikato River, the pumice particles have become mixed with other materials and have been distributed over the Hamilton Basin; these mixtures are referred to herein as natural pumiceous (NP) sands. This paper initially investigates an appropriate technique for measuring the maximum dry density (MDD) of NP sands; then a modified MDD test is proposed for estimating the pumice contents of these sands. In order to examine the applicability of different standard methods for determining MDD, New Zealand and Japanese standards are employed. The results using the Japanese standard show consistent MDD values when repeating the tests due to negligible particle crushing. On the other hand, the results of MDD tests according to the New Zealand standard indicate that a significant amount of particle crushing occurs after each repeated test and, consequently, it is not possible to get the same result when the test is repeated. NP sands reach their ultimate potential breakage during the modified MDD tests (at least, for the level of loading applied) and they experience different levels of particle crushing which may be a function of their pumice content. As a way forward, the relative breakages of the materials tested are used to estimate the pumice contents of the NP sands.     

Lighting preferences in office spaces concerning the indoor thermal environment

The accurate prediction of the visual comfort zone in an indoor environment is difficult as it depends on many parameters. This is especially the case for large compact urban areas in which the density and shadow from neighboring buildings can limit the accessible daylighting in indoor spaces. This paper investigates the satisfaction range for illuminance regarding indoor air temperature in office buildings and the significant parameters affecting this range in six office buildings in Tehran, Iran. Lighting comfort has been evaluated by a subjective survey (509 total responses) and field measurement. The questionnaires were filled out in 146 and 109 rooms in summer and winter, respectively. The results show that the illuminance should not be less than 550 lx, while illuminance between 600 and 650 lx provides the highest satisfaction level. The satisfaction with lighting level is affected by individual parameters such as age, type of activity, and environmental parameters such as window orientation, external obscurations, and season. A relationship was observed between lighting level satisfaction and thermal condition acceptance, and the overall comfort depends more on thermal conditions than the lighting level.     

The release rate and antimicrobial activity of calcium-alginate films containing self-microemulsifying Thymus vulgaris essential oil against Escherichia coli and Staphylococcus aureus

The aim of this study was to fabricate antimicrobial calcium-alginate-based films containing the self-microemulsifying thyme essential oil (TEO) formulations using Tween 80 as the surfactant, and acetic (AA) or propionic (PA) acids as the cosurfactants. A Ca-alginate film containing nano-emulsified TEO as well as a neat Ca-alginate film were considered as the controls. The scanning electron microscopy micrographs showed a highly porous texture for SME films, which resulted in an increase in water vapor permeability and water absorption capacity of these films. The SME films released the TEO completely within 155 min and inhibited the growth of S. aureus and E. coli in in vitro antimicrobial tests. The population of S. aureus and E. coli reduced significantly in ground beef covered with SME films. The results of this study showed that self-microemulsifying TEO films could effectively increase the shelf life of ground beef by controlling its microbial population.