Effects of breed and age at slaughter on degradation of muscle lipids during processing of dry‐cured hams

Hams from Landrace, Duroc and Hampshire pigs slaughtered at ages 6, 7.5 and 9 months were processed to generate Norwegian Parma‐style hams. Lipid contents and the compositions of fatty acid classes (ΣSFA, ΣMUFA, ΣPUFA) within neutral lipids, phospholipids and free fatty acids were determined. Small differences in lipid degradation and composition of the classes were revealed. However, significant sensory differences related to lipids were observed. Breed was more important than age. Dry‐cured Hampshire hams gave a more intense mature odour that may be associated with higher overall lipid degradation. Unexpectedly, these hams also demonstrated high juiciness and tenderness, which could be related to the melting characteristics of the fat. Dry‐cured Duroc hams showed a higher susceptibility towards rancidity, presumably associated with preferential oxidation of n‐6 fatty acids relative to C18:1 n‐9. Dry‐cured Landrace hams showed the lowest juiciness and tenderness, likely due to their lower fat content (marbling).     

Effects of citrate on the different phases of calcium oxalate crystallization

Urinary citrate appears to be an important factor in the crystallization process of calcium oxalate and calcium phosphate. The urinary excretion of citrate was found to be significantly lower in patients with calcium oxalate stone disease as compared with normal subjects, and about 30 per cent of the calcium stone formers can be considered as hypocitraturic. The lowest excretion of citrate was recorded in urine collected during the night. Citrate has significant effects on supersaturation with respect to both calcium oxalate and calcium phosphate, it also inhibits the growth of these crystals. In addition, citrate appears to be capable of inhibiting the aggregation of crystals composed of calcium oxalate, brushite, and hydroxyapatite. The heterogenous growth of calcium oxalate on calcium phosphate is also counteracted by citrate. As a consequence of the crucial role of citrate in these processes, stone prevention with alkaline citrate has become an attractive form of treatment in patients with recurrent stone formation. Single evening dose administration of sodium potassium citrate resulted in an of sodium potassium citrate resulted in an increased excretion of citrate, reduced levels of the calcium/citrate ratio as well as supersaturation with respect to calcium oxalate and a decreased rate of stone formation. However, conflicting results of stone preventive treatment with alkaline citrate have been reported by different groups, and long-term follow-up of patients treated in a randomized way is necessary to definitely assess the efficacy of alkaline citrate.     

Investigations of delamination criticality and the transferability of growth criteria

This article describes a study of delamination growth along 0 °/0 °, 0 °/ 5 °, ± 5 °, and 0 °/90 ° interfaces sandwiched between unidirectional carbon fibre/epoxy composite material. Relationships between damage criticality, growth rate and acoustic emission activity for delamination growth have been studied and the transferability of results from laboratory coupons to composite structural elements has been examined. Two types of coupon tests, conventional delamination beams and rigidly loaded single edge notched strips, have been compared for different mode ratios. Comparative tests have been made on buckling-induced delamination in plates. A graphite crack gauge has been used to measure delamination length and growth rate, ranging from 0.05–2000 m/s. Damage growth was also followed using visual, ultrasonic C-scan, X-ray radiography, macro-video and acoustic emission measurements. Empirical evaluations of interlaminar toughness for delamination beams are made using the Irwin-Kies relation. Unstable growth is analysed using elasto-dynamic moving finite elements. Bucklinginduced delamination is analysed using plate/shell FE methods with growth/remeshing algorithms.     

Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).     

Inhibition of Listeria monocytogenes on cold-smoked salmon by nisin and carbon dioxide atmosphere

The heat-stable enterotoxin of Escherichia coli binds to an intestinal receptor, guanylyl cyclase-C, and produces cGMP to induce diarrhea. Guanylin is an endogenous ligand of this receptor. In the present in vivo study, the intestinal water and ion secretion induced by mucosal application of 2 nmol/ml guanylin or 5 or 10 units/ml heat-stable enterotoxin into closed loops was compared in the rat. The characteristics of secretion induced by cAMP following intravenous perfusion of 1.2 nmol/100 g per h vasoactive intestinal peptide were compared to those induced by cGMP. Unidirectional Na+ and Cl- fluxes were estimated by addition of 22Na into the loop and i.v. injection of 36Cl. Guanylin induced less water and ion secretion than that produced by heat-stable enterotoxin in the colon, confirming the results of in vitro studies, and also in duodenum and ileum. The cAMP- or cGMP-mediated response had a similar pattern, i.e., an inhibition of Na+ absorption and an increase in anion secretion.     

Parabolic dish concentrators approximated by simple surfaces

Two different concentrating mirrors have been constructed that resemble parabolic dish reflectors. Both mirrors are made of slightly curved strips of flat, bendable material. The strips of the most simplified mirror have only large-radius circles and straight lines as boundaries. The necessary equations for making the mirrors are given. Also a simple way to make a stiff, lightweight frame and support for the mirror strips has been developed. Models of the mirrors have been built and successfully used for cooking and baking.     

Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

Normative Systems and their Revision: An Algebraic Approach

The paper discusses normative systems and their revision within an algebraic framework. If a system is logically well-formed, certain norms, called connecting norms, determine the system as a whole. It is maintained that, if the system is well-formed, a relation “at least as low as” determines a lattice or quasi-lattice of its connecting norms. The ideas are presented mainly in the form of comments on a legal example concerning acquisition of movable property by extinction of another person's previous rights.