Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites

The enhancement of the thermal conductivity, keeping the electrical insulation, of epoxy thermosets through the addition of pristine and oxidized carbon nanotubes (CNTs) and microplatelets of boron nitride (BN) was studied. Two different epoxy resins were selected: a cycloaliphatic (ECC) epoxy resin and a glycidylic (DGEBA) epoxy resin. The characteristics of the composites prepared were evaluated and compared in terms of thermal, thermomechanical, rheological and electrical properties. Two different dispersion methods were used in the addition of pristine and oxidized CNTs depending on the type of epoxy resin used. Slight changes in the kinetics of the curing reaction were observed in the presence of the fillers. The addition of pristine CNTs led to a greater enhancement of the mechanical properties of the ECC composite whereas the oxidized CNTs presented a greater effect in the DGEBA matrix. The addition of CNTs alone led to a marked decrease of the electrical resistivity of the composites. Nevertheless, in the presence of BN, which is an electrically insulating material, it was possible to increase the proportion of pristine CNTs to 0.25 wt% in the formulation without deterioration of the electrical resistivity. A small but significant synergic effect was determined when both fillers were added together. Improvements of about 750% and 400% in thermal conductivity were obtained in comparison to the neat epoxy matrix for the ECC and DGEBA composites, respectively. © 2019 Society of Chemical Industry     

On sorting triangles in a delaunay tessellation

In a two-dimensional Delaunay-triangulated domain, there exists a partial ordering of the triangles (with respect to a vertex) that is consistent with the two-dimensional visibility of the triangles from that vertex. An equivalent statement is that a polygon that is star-shaped with respect to a given vertex can be extended, one triangle at a time, until it includes the entire domain. Arbitrary planar triangulations do not possess this useful property which allows incremental processing of the triangles.This work was partially supported by the National Science Foundation's US-Italy Collaborative Research Program under Grant INT-8714578 and Information, Robotics, and Intelligent Research Grant IRI-8704781.     

Complete forward displacement solutions for a class of three-branch parallel manipulators

Forward displacement solutions are presented for a class of spatial parallel manipulators. In particular, considered are manipulators consisting of a platform supported through passive spherical joints by three branches, each branch having three-revolute joints forming its main arm. Solutions are described for arbitrary main-arm layouts and for all possible cases of redundant (nine, eight, and seven sensors) and non-redundant (six sensors) sensing of branch main-arm joint displacements. It is demonstrated that closed-form forward displacement solutions can be found for all cases of redundant sensing. Furthermore, it is shown that a closed-form solution can be obtained for one of the two possible cases of non-redundant sensing of the main-arm joint displacements. The only case of joint displacement sensing not allowing a closed-form forward displacement solution is two joints sensed per branch, a case that can be expressed as a 16th-order polynomial of a single variable. Due to the importance of having efficient and failure-safe solutions for the forward displacement problem, it is suggested that appropriate redundancy in displacement sensing should be an important consideration in the design of parallel manipulation devices. © 1994 John Wiley & Sons, Inc.     

Religion and spirituality: Linkages to physical health.

Evidence is presented that bears on 9 hypotheses about the link between religion or spirituality and mortality, morbidity, disability, or recovery from illness. In healthy participants, there is a strong, consistent, prospective, and often graded reduction in risk of mortality in church/service attenders. This reduction is approximately 25% after adjustment for confounders. Religion or spirituality protects against cardiovascular disease, largely mediated by the healthy lifestyle it encourages. Evidence fails to support a link between depth of religiousness and physical health. In patients, there are consistent failures to support the hypotheses that religion or spirituality slows the progression of cancer or improves recovery from acute illness but some evidence that religion or spirituality impedes recovery from acute illness. The authors conclude that church/service attendance protects healthy people against death. More methodologically sound studies are needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Lateral polysilicon pn diodes: current-voltage characteristicssimulation between 200 K and 400 K using a numerical approach

The current-voltage characteristics of lateral pn diodes fabricated in polysilicon layer grown by LPCVD on oxidized silicon substrates are analyzed versus temperature. The simulation proposed by Greve (1985) using the analytical current modeling is applied to forward and reverse junction currents for various temperatures; this modeling shows its limitations. Then to fit the experimental characteristics at low and high temperatures as well as at low and high current levels, a numerical modeling is developed taking into account the local electrical field effect on recombination and generation mechanisms at grain boundaries in the whole of the structure, i.e., quasi-neutral and depleted regions. This modeling allows one to fit the complete I-V experimental curves in the whole of the considered temperature range (200 K-400 K) with physical acceptable parameters     

Effect of dispersion states (electrostatic/electrosteric stabilization) on particles arrangement in the yttria-stabilized zirconia sediments

In the present work, particle arrangement and their packing in the sediment layer of zirconia suspension were studied. To evaluate the particle settling, aqueous suspensions of zirconia nanoparticles were prepared in different dispersion states. In one state, Dolapix CE64 was used as a dispersant to provide electrosteric mechanism. In another state, pH of the suspension was adjusted at 4 to provide electrostatic mechanism. The other state was the combination of dispersant and pH adjustment which resulted in the most stable suspension. First of all, the stability of all dispersion states was evaluated by zeta potential, sediment volume (SV) and height, viscosity, and packing density (PD). Then, the sediment layers of all suspensions were characterized. Incorporation of electrostatic mechanism was resulted in a main decrease in viscosity with high surface charges, while electrosteric mechanism caused lower sedimentation of particles. Fall velocities of particles/agglomerates were estimated, and the influences of dispersion states on the particles fall velocities were characterized. The microstructural observation revealed homogeneous packing of particles in the sediment layer of the stable suspension demonstrating the proper dispersion of particles. Dolapix CE64 and pH adjustment resulted in a uniform arrangement of particles without agglomeration and spherical and regular granules with a uniform shape.     

Modification of phenol–formaldehyde resol resins by lignin,starch, and urea

Lignin‐based chemicals, starch, and urea were used as modifiers for phenol–formaldehyde resol resins. The effects of the addition stage of the modifiers used in the synthesis of the resins and the type of modification reagent on the structures of the resins and their molar masses and reactivities were investigated. The modifications with corn starch and lignin promoted condensation; this was verified by increased molar masses and high ratios of methylene bridges to the sum of free ortho and para aromatic groups with respect to the corresponding reference resin without a modification reagent. The later the modifier was added to the resin condensation mixture, the more methylene bridges were formed with respect to the amounts of free ortho and para aromatic groups. In addition, when urea or wheat starch was added in the later condensation stage, the final condensation also reached high stages. The modifications with lignosulfonate and starch, as well as the early addition of urea, enhanced p–p′ bridge structures. The lowest condensation stage and, therefore, the highest reactivity were found when wheat starch was added with the starting reagents. The curing heat of the wheat‐starch‐modified resins decreased according to the deferred addition point of starch. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 582–588, 2003     

Design and analysis of single-factor experiments: Analysis of variance of the effect of rice husk ash and commercial fillers in NR compounds

Summary White rice husk ash (WRHA) and black rice husk ash (BRHA) were incorporated into natural rubber (NR) using a laboratory-sized two-roll mill. A conventional vulcanization system was used for curing and physical tests of the NR vulcanized involved determining of tensile and tear resistances. For comparison purposes, precipitated silica (Zeosil-175) and carbon black (N774) were used too. Using the analysis of variance of single-factor experiments, it can be concluded that: BRHA is non-reinforcing filler and its use is limited to 20 phr; WRHA is semi-reinforcing filler and the variation of filler loading (0 up to 50 phr) causes the maximum variation upon tensile strength of NR compounds; and, that although carbon black and silica are reinforcing fillers, a real reinforcement is reached up to 20 phr for tensile strength.     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

Mechanical and dynamical mechanical properties of chloroprene rubber and cellulose II composites

Vulcanized composites of chloroprene rubber (CR) with cellulose II (Cel II) as a filler were investigated. Cel II, obtained by the coagulation of cellulose xanthate, was incorporated in the rubber by the traditional method. The filler content varied from 0 to 30 phr. For comparison purposes, carbon black (CB)–CR composites were also studied. The CB amount varied from 0 to 45 phr. The mechanical and dynamic mechanical properties were determined, and the CR composite containing 20 phr of Cel II showed the best set of properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2425–2430, 2004