Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

On the impact of physical layer awareness on scheduling and resource allocation in broadband multicellular IEEE 802.16 systems [Radio Resource Management and Protocol Engineering for IEEE 802.16]

Multicellular networks based on the IEEE 802.16 standard appear to be very promising candidates to provide end users with broadband wireless access. However, they also pose interesting challenges in terms of radio resource management, where several design choices are not specified in the standard, intentionally left open to implementors. For this reason, we focus in this article on scheduling and resource allocation, and investigate how they could operate in a cross-layer fashion. In particular, we describe the principles of joint scheduling and resource allocation for IEEE 802.16 operating in AMC mode, and discuss the critical role played by physical layer considerations, especially intercell interference estimation and channel state awareness, in the obtained performance. This leads to identifying key open issues and possible general solutions     

Surface tension as a limiting factor for aerobic n-alkane biodegradation

A new mathematical model for n-alkane biodegradation in crude oil, heavy oil and paraffinic mixtures is described. The pattern of n-alkane degradation as a function of the inverse of hydrocarbon chain length reported in this paper can be considered as general behaviour for many aerobic n-alkane biodegradation processes. A new interpretation of n-alkane biodegradation as a function of surface tension, is given. A mathematical expression was obtained starting from the degradation values of n-alkane and relative surface tension, which is a parameter independent of fermentation conditions. An interesting parameter, b, was identified which represented the accelerating conversion factor for n-alkane biodegradation. The findings suggested that the n-alkane biodegradation. The findings suggested that he n-alkane biodegradation rate may be affected by the fermentation condition (agitation, aeration, etc.) and by the strain of microorganism, while the behaviour pattern of n-alkane degradation was essentially linked to the substrate characteristics (molecular structure, molecular weight and density).     

From real to metaphoric maps: Cartography as a visual language for organizing and sharing knowledge

In this paper we discuss about geographic representations as a basis for describing, organizing, accessing and understanding heterogeneous shared information on the web. Maps are popular on the web, because of the reference to space, the most important domain of human experience, the proliferation of location aware devices and services and the availability of a set of tools that enable an heterogeneous population of users to explore and even modify these representations.Metaphorical maps, representing concepts and relations of a specific knowledge domain with symbols taken from another well known and widely used domain, couple the benefits of cartographic representation with the power and intuitiveness of the metaphor, permitting the communication and sharing of such knowledge.We introduce a classification of maps based on antinomies between real and imaginary worlds, and between direct and metaphoric knowledge; we argue that cartography can be used as a visual language for organizing and sharing knowledge related to different semantic domains, supporting our arguments with examples. Finally, we define a set of functions and related data structures able to support a user in browsing cartographic representations using state-of-art tools and systems available on the web.     

Occurrence patterns of alien freshwater turtles in a large urban pond ‘Archipelago’ (Rome,Italy): Suggesting hypotheses on root causes

The patterns of the occurrence and distribution of alien freshwater turtle species in an urban pond archipelago (Rome, Italy) were analysed, with the aim of exploring the role of a set of factors (type of ponds, landscape context, size area, distance from the nearest road) with a generalized linear model approach. A total of 311 ponds subdivided in three types (fountains, small basins, lakes) embedded in different landscape contexts (public parks, private parks, urban areas) at differing distances from the nearest road were sampled. Six non‐native freshwater turtle species in 31 sites were recorded (9.97%). Lakes exhibited the highest occurrence rates of alien freshwater turtles, compared to small basins and fountains. Freshwater turtle species in urbanized areas were only observed in parks (both public and private). In both the public and private parks, the lakes exhibited the highest percentage of occupied sites, with fountains being the lowest. A direct and significant relationship was observed between pond size and species richness. The distance from the nearest road did not appear to affect species richness. A first interpretation of the data from this study facilitated the postulation of two a posteriori hypotheses that should be tested, as follows: (i) the causal process of turtle release is random, and the rate of extinction (and recapture) is higher in smaller ponds, thus producing the observed pattern; and (ii) the turtle release is not random, and people actively select the ponds they consider more suitable for their pet animals. In this study, it appears the lakes were perceived by those who abandon their pets as the most ecologically suitable habitats among other pond types to accommodate the different species of turtles. Knowledge of people's attitudes in regard to releasing pet animals also might assist managers of public green spaces to develop strategies aimed to preserve local biodiversity, and to educate the public about the conservation issue represented by the alien species.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Acidolysis of babassu fat catalyzed by immobilized lipase

The lipase-catalyzed interesterification of oils and fats gives products that are unobtainable by chemical interesterification methods. Acidolysis of babassu fat and palmitic acid, catalyzed by immobilized lipase (Lipozyme; Novo Industri, Bagsveard, Denmark), was studied. The reactions were performed at 65°C with 5% w/w enzyme for 4 h. The molar proportions of babassu fat/palmitic acid were 1∶0.1, 1∶0.3 and 1∶0.5. At the end of the reaction period, the catalyst particles were removed by filtration, and the residual oil was extracted with organic solvent (diethyl ether). The recovered particles were then reused. The palmitic acid content of babassu fat before and after acidolysis changed from 10 to 22% at a molar proportion of 1∶0.5. The equilibrium was attained in about 4 h. The original water and enzymatic activities of Lipozyme were maintained after acidolysis. Water sorption isotherms of the immobilized enzyme were determined at 25, 35 and 45°C. From the temperature dependence of the isotherms, isosteric heats of sorption were evaluated by means of the Clausius Clapeyron equation. Monolayer moisture content was calculated by means of the B.E.T. and Guggenhein-Anderson-De Boer analyses. Paper presented at the International Meeting on Fats and Oils Technology, Universidade Estadual de Campinas, Brazil, 1991.     

The hydrocarbon fraction of virgin olive oil and changes resulting from refining

In numerous Spanish virgin olive oils, 6,10-dimethyl-1-undecene, various sesquiterpenes, the series ofn-alkanes from C14 to C35, n-8-heptadecene and squalene are the only less volatile components detected by gas chromatography in the hydrocarbon fraction. In oils from olives of the Arbequine variety, a series ofn-9-alkenes has also been found. In refined oils, notable features are the absence of the most volatile compounds and the appearance of other hydrocarbons produced during the refining process. Among these,n-alkanes, alkadienes (mainlyn-hexacosadiene), stigmasta-3,5-diene, isomerization products of squalene, isoprenoidal polyolefins coming from hydroxy derivatives of squalene and steroidal hydrocarbons derived from 24-methylene cycloartanol were identified. Physical refining produces larger amounts of degradation products and greater losses ofn-alkanes than chemical processing. Squalene is the major hydrocarbon component in all oils, both virgin and refined. The ranges of concentration for the different hydrocarbons found in Spanish virgin olive oils are presented.     

Heat Induced Structure Modifications in Polymer‐Layered Silicate Nanocomposites

Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.

Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air.     

Aromatization of [1-14C]heptane over “nonacidic” platinum-alumina catalyst

[1-¹⁴C]Heptane was aromatized under 5 atm pressure over a “nonacidic” 3% platinum on alumina catalyst maintained at 500 °C. The reactant was pumped in at a HLSV of 0.88, and the hydrogen-to-heptane mole ratio was 5.1. The samples of product were collected (one during the first 90 min and another during the next 90 min), the toluene was separated from the respective samples, and the radioactivity in each position of the toluene was determined by a degradation sequence. The distribution of radioactivity in sample 1 was as follows: in position 1–2.6%, 2–38.6%; 3–14.5%; 4–4.2%, and in the methyl group—40.1%. Approximately similar distribution of radioactivity was found in sample 2. 1,6-Ring closure is the most important pathway leading to the formation of toluene from [1-¹⁴C]heptane; lesser amounts of repetitive, 1,5-ring closure and hydrogenolysis, and bond shift reactions followed by 1,6-ring closure and dehydration can explain the distribution of radioactivity. The participation of 1,7-ring closure in the reaction is also indicated.