Processing of Yttria-Alumina Coated Silicon Nitride Slips by Slip Casting

Si₃N₄powders coated with 6 wt% Y₂O₃and 4 wt% Al₂O₃were prepared by coprecipitation. The resulting powders were dispersed in water at different pH values and with addition of various amounts of ammonium polyacrylate (NH₄PA) to produce 32 vol% slips. The influence of the amount of NH₄PA solution added and pH on the rheological properties of 32 vol% coated Si₃N₄slips were studied. In addition, the sintered density of cast samples was determined and related to the degree of slip dispersion. The adsorption of the NH₄PA on the coated particle surface was rather high and the surface became saturated near 0.86 mg/m²at pH 9.2. High NH₄PA concentrations (1.7–3 wt%) were necessary to obtain well dispersed 32 vol% coated Si₃N₄slips at pH 9.2. The best stabilization was obtained with the addition of 2.3 wt% NH₄PA; in this condition, the viscosity reached a minimum value of 35 mPa.s at 100 s^–1. The slip viscosity increased with increasing pH from 9.2 to 10.2. Slips with low viscosities gave a more dense packing of cast samples and consequently higher sintered density values.     

Aqueous tape casting of yttria stabilized zirconia

Tape casting process was used to produce yttria stabilized zirconia (YSZ) substrates in an aqueous system with poly(vinylalcohol) (PVA) and glycerine as binder and plasticizer, respectively. Various compositions of YSZ slips with different amounts of PVA and glycerine and consequently different solid/liquid ratios were prepared. The influence of the slip composition on the rheological properties of the slips was studied. In addition, the effect of the slip composition on the properties of the green and sintered tapes was investigated. PVA and glycerine did not affect the dispersion properties of the YSZ powder. Glycerine additions enhanced the flexibility of the green tapes but also produced a decrease in the tensile strength. The increase in the PVA content increased the tensile strength but resulted in a markedly decrease in the green density of the tapes. A correlation between the green and sintered density was found. The anisotropic sintering shrinkage parallel and perpendicular to the casting direction increased with increasing the PVA content. The slip compositions with 5 wt% PVA produced green tapes with satisfactory tensile strength. They had the highest sintered density, the lower sintering shrinkage and the lesser shrinkage anisotropy.     

Stereoselective Synthesis and Antiallodynic Activity of 3-Hydroxylated Paroxetines

The design, stereoselective synthesis and in vivo antiallodynic activity of four novel paroxetine analogs, named 3-hydroxy paroxetines (3HPXs), is reported herein. Among the novel synthesized compounds, three showed an antiallodynic effect, while (R,R)-3HPX was found to be 2.5 times more bioactive than (-)-paroxetine itself in neuropathic rats. Consequently, the current investigation not only discloses a novel promising analgesic drug, but also reveals that functionalization at the C3 position of paroxetine could be as effective as the common functionalization at either C4 or within the sesamol group.     

Geochemical implications of trace elements and sulfur in the saturate, aromatic and resin fractions of crude oil from the Mara and Mara Oeste fields, Venezuela

Ten trace elements (Cr, Zn, Fe, Mn, Cu, Co, Ni, Mo, V and Sr) and sulfur were determined in the saturate, aromatic and resin fractions of 15 crude oils from Mara (DM) and Mara Oeste (DMO) fields of the Maracaibo Basin, Venezuela. The oils studied are classified as unaltered or altered by biodegradation. In the altered oil, the depletion of n-alkanes, the absence of isoprenoids and the presence of steranes and hopanes unaltered by biodegradation are indicative of moderate biodegradation. The elements Zn, Fe, Mn, Cu, Ni, and Sr were detected in the saturated hydrocarbon fraction; Cr and V were detected in the aromatic fraction in addition to the above elements; whereas the elements detected for the resin fraction were Cr, Zn, Fe, Cu, Ni, Mo, V, and Sr. Co was not detected in any fractions of the oils analyzed. Sulfur was found in all fractions of the oils studied. It was proposed that Fe, Zn, Sr, and Mn could have entered the oil during migration or Fe, Zn and Mn as pollutants during oil extraction. Cr and Cu may be of biological origin and Mo could be incorporated into the reservoir through bacteria. Only S, V, and Ni in the resin fractions can be used as indicators of the origin and correlation of Mara and Mara Oeste oils. Based on the results obtained in this work, it can be established that the V/(V+Ni) ratio in the resin fraction can be used as a correlation parameter, for these oils.     

Synthesis and Characterization of Al-MCM-41 and Al-MCM-48 Mesoporous Materials

A novel route in the synthesis of Al-MCM-41 and Al-MCM-48, using tetraethoxysilane (TEOS) and sodium aluminate (NaAlO₂) as Si and Al source has been obtained. The effect of surfactant nature and the synthesis conditions such as surfactant/Si ratio and hydrothermal treatment time on the formed mesostructure regularity has been studied. Different methods of template removal have also been evaluated. The samples were characterized by X-ray diffraction, nitrogen physisorption, FT-IR, and solid-state MAS NMR spectroscopy.     

Toward emotional interactive videogames for children with autism spectrum disorder

Universal Access in the Information Society - Technology and videogames have been proven as motivating tools for working attention and complex communication skills, especially in children with...     

Active learning through collaborative knowledge building using an automatic free-text scoring system in a b-learning environment

According to active learning, students should be responsible for their own learning. Automatic free-text scoring allows teachers to provide open-ended questions with their correct answers to a computer system, so when students answer the questions, they get immediate feedback (a score, a comment, or both). However, teachers are usually overloaded with many tasks, and they may not have time to create the questions with the correct answers. Therefore, in the 2012/2013 academic year, we asked a group of 124 Pre-Primary and Primary Education students to become the creators of the questions and their correct answers in groups in a free-text scoring system, so the questions use learners’ language, not teachers’ language. From them, 41 students (group of involved students, GIS) fulfilled all the requirements during the course. Our hypothesis was that GIS would be able to increase their academic performance and levels of engagement compared to the rest of the students. The results gathered provide statistic evidence to support that hypothesis. This study pretends to help teachers who want to increase the academic performance and levels of engagement of their students in courses that they may find boring and unrelated to the main topic of their degree, or not directly related with their main academic interests.     

Control design for discrete‐time bilinear systems using the scalarized Schur complement

In this paper, controller design for discrete‐time bilinear systems is investigated by using sum of squares programming methods and quadratic Lyapunov functions. The class of rational polynomial controllers is considered, and necessary conditions on the degree of controller polynomials for quadratic stability are derived. Next, a scalarized version of the Schur complement is proposed. For controller design, the Lyapunov difference inequality is converted to a sum of squares problem, and an optimization problem is proposed to design a controller, which maximizes the region of quadratic stability of the bilinear system. Input constraints can also be accounted for. Copyright © 2017 John Wiley & Sons, Ltd.     

Personalization in cultural heritage: the road travelled and the one ahead

Over the last 20?years, cultural heritage has been a favored domain for personalization research. For years, researchers have experimented with the cutting edge technology of the day; now, with the convergence of internet and wireless technology, and the increasing adoption of the Web as a platform for the publication of information, the visitor is able to exploit cultural heritage material before, during and after the visit, having different goals and requirements in each phase. However, cultural heritage sites have a huge amount of information to present, which must be filtered and personalized in order to enable the individual user to easily access it. Personalization of cultural heritage information requires a system that is able to model the user (e.g., interest, knowledge and other personal characteristics), as well as contextual aspects, select the most appropriate content, and deliver it in the most suitable way. It should be noted that achieving this result is extremely challenging in the case of first-time users, such as tourists who visit a cultural heritage site for the first time (and maybe the only time in their life). In addition, as tourism is a social activity, adapting to the individual is not enough because groups and communities have to be modeled and supported as well, taking into account their mutual interests, previous mutual experience, and requirements. How to model and represent the user(s) and the context of the visit and how to reason with regard to the information that is available are the challenges faced by researchers in personalization of cultural heritage. Notwithstanding the effort invested so far, a definite solution is far from being reached, mainly because new technology and new aspects of personalization are constantly being introduced. This article surveys the research in this area. Starting from the earlier systems, which presented cultural heritage information in kiosks, it summarizes the evolution of personalization techniques in museum web sites, virtual collections and mobile guides, until recent extension of cultural heritage toward the semantic and social web. The paper concludes with current challenges and points out areas where future research is needed.     

Hierarchically structured polymer blends based on silsesquioxane hybrid nanocomposites with quaternary ammonium units for antimicrobial coatings

The paper reports the first study on hierarchical assemblies (nanofibrillar micelles confined within semi-cylindrical shells) with silsesquioxane and quaternary ammonium units obtained through polymer blending intended for antimicrobial/antifungal stone coatings. The formation of hierarchical structures on solid surfaces is due to the multiple intermolecular ionic interactions, intermolecular Van der Waals and hydrophobic interactions acting among the component molecules. Their antimicrobial/antifungal properties toward the Gram-negative bacteria, Escherichia coli, Gram-positive bacteria, Staphylococcus aureus, and Candida albicans fungus were determined in aqueous solution and were found to be strongly dependent of the topographical features of the coating.