A stationary sampling scheme for multilayer positron tomographs

A stationary sampling scheme applicable to tomographic instruments incorporating two or more detector layers is described and tested. In this concept, the detectors in adjacent layers are angularly offset by half the interdetector distance. By reconstructing in one single slice all lines of response defined by two adjacent rings of detectors, a fourfold increase in the number of coincidence lines is obtained and a uniform sampling distance equal to one-quarter the interdetector spacing is achieved. Whereas this is obtained at the expense of a 100% degradation of the resolution in the axial direction, with the recent breed of PET (positron emission tomography) scanners using nearly square cross section detectors, the resolution loss may be tolerable in many situations. In addition, normal reconstruction of the individual coincidence planes is always possible. The sampling concept was investigated experimentally with the help of the Universite de Sherbrooke PET camera simulator.     

The effect of photo-oxidation on thermal and fire retardancy of polypropylene nanocomposites

Nanocomposites of polypropylene-graft-maleic anhydride/clay were prepared by melt blending in an extruder mixer. The nanoscale dispersion of the clay in the polymer was analysed by wide-angle X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of XRD and TEM showed that the nanocomposites obtained were a kind of intercalated-delaminated structures side by side with different dominant states, depending on the clay used and on the processing conditions. The consequences of photo-oxidation on the thermal stability and fire retardant properties of the nanocomposites were investigated using thermogravimetric analysis and cone calorimetry tests. It appeared that this degradation dramatically affected the important properties of the nanocomposites. A loss of thermal stability and fire retardant performance was observed. This was ascribed to scission reactions that occurred during the oxidative degradation prior to thermal and fire tests.     

Effect of binder on performance of intumescent coatings

This study investigates the role of the polymeric binder on the properties and performance of an intumescent coating. Waterborne resins of different types (vinylic, acrylic, and styrene-acrylic) were incorporated in an intumescent paint formulation, and characterized extensively in terms of thermal degradation behavior, intumescence thickness, and thermal insulation. Thermal microscopy images of charred foam development provided further information on the particular performance of each type of coating upon heating. The best foam expansion and heat protection results were obtained with the vinyl binders. Rheological measurements showed a complex evolution of the viscoelastic characteristics of the materials with temperature. As an example, the vinyl binders unexpectedly hardened significantly after thermal degradation. The values of storage moduli obtained at the onset of foam blowing (melamine decomposition) were used to explain different intumescence expansion behaviors.     

Cokriging-Based Sequential Design Strategies Using Fast Cross-Validation Techniques for Multi-Fidelity Computer Codes

Cokriging-based surrogate models have become popular in recent decades to approximate a computer code output from a few simulations using both coarse and more complex versions of the code. In practical applications, it is common to sequentially add new simulations to obtain more accurate approximations. We propose a method of cokriging-based sequential design, which combines both the error evaluation provided by the cokriging model and the observed errors of a leave-one-out cross-validation procedure. This method is proposed in two versions, the first one selects points one at a time. The second one allows us to parallelize the simulations and to add several design points at a time. The main advantage of the suggested strategies is that at a new design point they choose which code versions should be simulated (i.e., the complex code or one of its fast approximations). A multifidelity application is used to illustrate the efficiency of the proposed approaches. In this example, the accurate code is a two-dimensional finite element model and the less accurate one is a one-dimensional approximation of the system. This article has supplementary material online.     

Capillary self-alignment of polygonal chips: a generalization for the shift-restoring force

Capillary-driven self-alignment using droplets is currently extensively investigated for self-assembly and microassembly technology. In this technique, surface tension forces associated to capillary pinning create restoring forces and torques that tend to bring the moving part into the alignment. So far, most studies have addressed the problem of square chip alignment on a dedicated patch of a wafer, aiming to achieve 3D microelectronics. In this study, we investigate the shift-restoring forces for more complex moving parts such as regular—convex and non-convex—polygons and regular polygons with regular polygonal cavities. A closed-form approximate expression is derived for each of these polygonal geometries; this expression agrees with the numerical results obtained with the Surface Evolver software. For small shifts, it is found that the restoring force does not depend on the shift direction or on the polygonal shape. In order to tackle the problem of microsystem packaging, an extension of the theory is done for polygonal shapes pierced with connection vias (channels), and a closed form of the shift-restoring force is derived for these geometries and again checked against the numerical model. In this case, the restoring force depends on the shift direction. Finally, a non-dimensional number, the shift number, is proposed that indicates the isotropic or anisotropic behavior of the chip according to the shift direction.     

Using immersive virtual reality and anatomically correct computer-generated characters in the forensic assessment of deviant sexual preferences

Penile plethysmography (PPG) is the gold standard for the assessment of sexual interests, especially among sex offenders of children. Nonetheless, this method faces some ethical limitations inherent to the nature of its stimuli and could benefit from the improvement of its ecological validity. The use of computer-generated characters (CGC) in virtual immersion for PPG assessment might help address these issues. A new application developed to design made-to-measure anatomically correct virtual characters compatible with the Tanner developmental stages is presented. The main purpose of this study was to determine how the virtual reality (VR) modality compares to the standard auditory modality on their capacity to generate sexual arousal profiles and deviance differentials indicative of sexual interests. The erectile responses of 22 sex offenders of children and 42 non-deviant adult males were recorded. While both stimulus modalities generated significantly different genital arousal profiles for sex offenders of children and non-deviant males, deviance differentials calculated from the VR modality allowed for significantly higher classification accuracy. Performing receiver operating characteristic analyses further assessed discriminant potential. Auditory modality yielded an area under the curve (AUC) of 0.79 (SE = 0.059) while CGC in VR yielded an AUC of 0.90 (SE = 0.052). Overall, results suggest that the VR modality allows significantly better group classification accuracy and discriminant validity than audio stimuli, which provide empirical support for the use of this new method for PPG assessment. Additionally, the potential use of VR in interventions pertaining to self-regulation of sexual offending is addressed in conclusion.     

Slip Length Measurements Using µPIV and TIRF-Based Velocimetry

The goal of this paper is to review progress (mostly recent) made in micro and nanovelocimetry, focusing on two techniques: µPIV (microparticle image velocimetry) and nanoPTV (nanoparticle tracking velocimetry). The paper focuses on the measurement of slippage (taken as a benchmark for these techniques), concentrating on work done in our group. We review the developments of µPIV that led, in the last ten years, to the achievement of 100 nm accuracy in the measurement of slip lengths. Later, this approach was complemented by nanoPTV, which recently obtained ±5 nm precision. Here, we also mention recent application of these techniques toward better characterization of microgel and polymer flows. As a whole, the two techniques have conveyed valuable information on flow behavior within and close to the boundaries of microchannels, on the importance of wetting, and on the role of surface heterogeneities. µPIV is commercially available but nanoPTV is not mature. Interesting instrumental developments are expected in the future for the latter technique.     

基于Livermore模型CT图片构建人体躯干数字体模及其在肺部计数器虚拟刻度中的应用

基于Livermore 人体躯干物理模型CT图片构建数字体模,并结合蒙特卡罗程序MCNP对一套由四个宽能高纯锗探测器(BEGe)构成的肺部计数器进行了虚拟刻度.首先,利用点源(241Am,137Cs,60Co,54Mn,57Co,109Cd) 实验数据,对高纯锗晶体尺寸进行调整以获得正确的探测器几何参数,在γ射线能量13.9 keV～1332.5 keV范围内,调整后四个探测器全能峰效率实验测量的平均值与蒙特卡罗计算值的差别在±10%范围内.之后,对不同胸壁厚度(CWT=19 mm, 25 mm, 30 mm, 43 mm)躯干体模进行CT扫描获得其CT图片,利用Dosigray软件对CT图片进行分割后,连同探测器几何描述文件输入到OEDIPE软件,生成数字体模虚拟刻度用MCNP输入程序.最后,利用241Am、152Eu肺部源对数字体模虚拟刻度结果进行了实验验证,结果表明:在59.5 keV～1408 keV能量范围内,虚拟刻度结果与实验结果的差别在±10%之间;对于17.5 keV能量,差别在±30%之间.     

Whodunnit – Searching for the most important feature types signalling emotion-related user states in speech

In this article, we describe and interpret a set of acoustic and linguistic features that characterise emotional/emotion-related user states – confined to the one database processed: four classes in a German corpus of children interacting with a pet robot. To this end, we collected a very large feature vector consisting of more than 4000 features extracted at different sites. We performed extensive feature selection (Sequential Forward Floating Search) for seven acoustic and four linguistic types of features, ending up in a small number of ‘most important’ features which we try to interpret by discussing the impact of different feature and extraction types. We establish different measures of impact and discuss the mutual influence of acoustics and linguistics.