Phase I trial of inhaled natural interleukin 2 for treatment of pulmonary malignancy: toxicity, pharmacokinetics, and biological effects

Safety, local and systemic immunomodulation, and tumor response to treatment with aerosolized natural interleukin 2 (nIL-2) applied five times a day were studied in a Phase I trial in 16 patients with pulmonary malignancies refractory to conventional therapy. The toxicity of inhaled nIL-2 was different from that observed after systemic administration. Reversible airway irritation causing a nonproductive cough represented the dose-limiting toxicity. Mild to moderate reduction of the vital capacity and forced expiratory volume (FEV1) with minor effects on relative FEV1, peak expiratory flow, airway resistance, and PaO2 was experienced by individual patients. In 14 patients suffering from pulmonary metastases due to renal cell cancer, one durable complete response, one partial response, and one mixed response were observed. Inhalation of nIL-2 aerosol resulted in a dose-dependent expansion of pulmonary immunocompetent cells in bronchoalveolar lavage fluid. Posttreatment bronchoalveolar lavage showed an activated lymphocyte phenotype with increased HLA-DR expression. The only systemic biological effect detectable in peripheral blood was a marked increase of soluble interleukin 2 receptor serum levels. We conclude that treatment with aerosolized nIL-2 is an effective means for site-specific immunomodulation and deserves further investigation for the treatment of malignant and inflammatory lung disease.     

Electroplating of micro-patterned tools via replication of silicone rubber forms

A two-step replication process is described, allowing the non-destructive reproduction of micro-patterned tools. The first step comprises the embedding of the original part into silicone resin, the resin curing, and the separation of the part from the silicone rubber. The outstanding plasticity and the weak adherence of silicone rubber to most substrate materials facilitate retaining the original part. The second replication step, electroforming, requires silicone rubber metallization and contacting. The demonstrated technique is qualified mainly due to successful precautions against replication artifacts, related to silicone rubber deformability.     

CdTe-CdS solar cells — Production in a new baseline and investigation of material properties

In this paper, we describe our new baseline for CSS-CdTe-CdS solar cells on 10 × 10 cm² substrates. The deposition of the p-n junction and all the following steps were performed at the Institut für Festkörperphysik (IFK) in Jena. Using the new baseline, we are already able to produce solar cells with similar properties as commercial ones. In the batch type process, all manufacturing steps can be investigated separately. We employ Rutherford backscattering spectrometry (RBS), X-ray diffraction (XRD) and external quantum efficiency (EQE) measurements to characterise the structure of the bulk materials and interfaces. It is demonstrated that by RBS the front contact becomes accessible for thinned CdTe films. At the back contact, RBS spectra show a tellurium accumulation which is due to etching. This tellurium rich layer is confirmed by XRD with Rietveld refinement. The intermixing at the CdS-CdTe interface caused by the activation step is quantified by a bandgap determination based on EQE measurements. From the bandgap energy of the CdTe_1 − xS_x compound, we calculated the sulphur fraction x at the interface. XRD measurements imply that the activation step induces a (111) texture in CdTe. With regard to an improved manufacturing process, our cells are compared to industrial cells produced by Antec Solar Energy.     

Zum Einsatz synthetischer Pyrethroide im vorbeugenden Holzschutz

The synthetic pyrethroids fenvalerate and cypermethrine, natural pyrethrum and lindane were investigated as wood preservatives under conditions of application to determine their contribution to indoor pollution. While pyrethrum degraded within 10 days, fenvalerate and cypermethrine showed high stability and long-term remaining in wood and no volatility into gasphase. In contrast to lindane they do not contribute to indoor pollution.     

Influence of compaction on the interfacial transition zone and the permeability of concrete

The interfacial transition zone (ITZ) is regarded as a key feature for the transport properties and the durability of concrete. In this study one self-compacting concrete (SCC) mixture and two conventionally vibrated concrete (CVC) mixtures are studied in order to determine the influence of compaction on the porosity of the ITZ. Additionally oxygen permeability and water conductivity were measured in vertical and horizontal direction. The quantitative analysis of images made with an optical microscope and an environmental scanning electron microscope shows a significantly increased porosity and width of the ITZ in CVC compared to SCC. At the same time oxygen permeability and water conductivity of CVC are increased in comparison to SCC. Moreover, considerable differences in the porosity of the lower, lateral and upper ITZ are observed in both types of concrete. The anisotropic distribution of pores in the ITZ does not necessarily cause anisotropy in oxygen permeability and water conductivity though.     

Underpotential alloy formation in the system Ag(hkl)/Cd2+

The underpotential deposition (UPD) of Cd on “real” and “quasi-ideal” silver single crystal surfaces of (111) and (100) crystallographic orientation as well as on polycrystalline silver substrate has been investigated in 0.5 M Na₂SO₄ supporting electrolyte solutions. At high underpotentials 100 < ΔE < 350 mV, the UPD is characterized by a quasi-reversible adsorption/desorption of Cd whereas at low underpotentials. ΔE < 50 mV, an increase of the anodic stripping charge with the polarization time is found due to the formation of an AgCd alloy at the substrate surface. The time dependence of this process can be described by a parabolic rate law, the rate constant of which is a function of ΔE and temperature T. Relatively low activation energies of about 70 kJmol^?1 were determined from measurements at 293 ? T ? 338 K. The results are discussed in terms of a semi-infinite-linear diffusion model. The alloy formation process is assumed to be initiated by a place exchange between Ag substrate atoms and vacancy sites within a mobile Cd adsorbate layer thus forming the initial stage of a highly distorted AgCd alloy. The further growth will take place by the movement of Ag atoms through the vacancy-rich surface alloy and the simultaneous deposition of Cd at the interface AgCd/Cd²⁺.     

Einfluß von Lösungsmitteln auf den Partikeldurchmesser von Dispersionen anionischer Polyurethanionomerer

Aqueous dispersions of anionic polyurethanes were prepared by reaction of polyethers, 1,6-hexamethylene diisocyanate, 1,2,4-benzenetricarboxylic acid anhydride and triethyl amine. Formation of the dispersion was achieved by phase reversal or by precipitation. Phase reversal occurred when the solution or the melt of the polymer was treated with water, while precipitation took place when the solution was stirred into water. The amount of acetone used has an effect on the mean particle diameter, D?_T, obtained by turbidity measurements. There was an optimal acetone concentration at which D?_T reached a minimum. A similar effect was observed when tetrahydrofuran, 2-butanone or acetonitrile were used as solvents instead of acetone. When the dispersion was formed by precipitation, only adequately diluted acetonic solutions formed colloidal dispersions, while concentrated solutions gave dispersions with a broad particle size distribution.     

Heat exchanger network synthesis with detailed exchanger designs: Part 1. A discretized differential algebraic equation model for shell and tube heat exchanger design

A new method for the detailed design of shell and tube heat exchangers is presented through the formulation of coupled differential heat equations, along with algebraic equations for design variables. Heat exchanger design components (tube passes, baffles, and shells) are used to discretize the differential equations and are solved simultaneously with the algebraic design equations. The coupled differential algebraic equation (DAE) system is suitable for numerical optimization as it replaces the nonsmooth log mean temperature difference (LMTD) term. Discrete decisions regarding the number of shells, fluid allocation, tube sizes, and number of baffles are determined by solving an LMTD-based method iteratively. The resulting heat exchanger topology is then used to discretize the detailed DAE model, which is solved as a nonlinear programming model to obtain the detailed exchanger design by minimizing an economic objective function through varying the tube length. The DAE model also provides the stream temperature profiles inside the exchanger simultaneously with the detailed design. It is observed that the DAE model results are almost equal to the LMTD-based design model for one-shell heat exchangers with constant stream properties but shows significant differences when streams properties are allowed to vary with temperature or the number of shells are increased. The accuracy of the solutions and the required computational costs show that the model is well suited for solving heat exchanger network synthesis problems combined with detailed exchanger designs, which is demonstrated in Part 2 of the paper.     

Automated interpretation and accessible presentation of technical diagrams for blind people

The EU-supported TeDUB (Technical Drawings Understanding for the Blind) project is developing a software system that aims to make technical diagrams accessible to blind and visually impaired people. It consists of two separate modules: one that analyses drawings either semi-automatically or automatically, and one that presents the results of this analysis to blind people and allows them to interact with it. The system is capable of analysing and presenting diagrams from a number of formally defined domains. A diagram enters the system as one of two types: first, diagrams contained in bitmap images, which do not explicitly contain the semantic structure of their content and thus have to be interpreted by the system, and second, diagrams obtained in a semantically enriched format that already yields this structure. The TeDUB system provides blind users with an interface to navigate and annotate these diagrams using a number of input and output devices. Extensive user evaluations have been carried out and an overall positive response from the participants has shown the effectiveness of the approach.