The objective of our study was to investigate and evaluate the relationship between road traffic noise and cardiovascular risk.
Methods
The study sample (n = 659; 36.9% male, 63.1% female university students, mean age 22.83 ± 1.58 years) included a group exposed to road traffic noise (n = 280, Leq,24 h = 67 ± 2 dB(A)) and a control group (n = 379, Leq,24 h = 58.7 ± 6 dB(A)). Subjective response was determined by a validated noise annoyance questionnaire. The ten year risk of developing a coronary heart disease event was quantified as an evaluation of cardiovascular risk (SCORE60, Framingham 10-year risk estimation and projection to the age of 60, relative risk SCORE chart).
Results
Cardiovascular risk scores were significantly higher in the exposed group based on the Framingham scores projected to the age of 60, SCORE60 (AOR = 2.72 (95% CI = 1.21-6.15)) and the relative risk SCORE chart (AOR = 2.81 (1.46-5.41)).
Conclusions
These findings highlight the association between road traffic noise and cardiovascular risk. 相似文献
We have studied tribological properties of pre-adsorbed salivary films formed in vitro on compliant hydrophobic surfaces. The adsorbed salivary film significantly decreases boundary friction under physiological ionic strength, which is related to a hydrophilic character of the adsorbed film and its structure. Decrease in the ionic strength below physiological conditions affects film’s structure, but it does not significantly affect boundary lubrication at low loads. Applications of high loads led to a gradual loss of lubrication due to shear-induced wear of the films. The wear became more extensive as the ionic strength of the solvent was lowered below physiological conditions. 相似文献
Inorganic polymer (IP) foams could be used as an alternative to commonly available cellular concretes. To do so, however, it is crucial to understand how the foaming kinetics and the final foam properties can be controlled and tailored to delivered the desired performance. The research reported in this article investigates the influence of the SiO2/Na2O ratio of the activating solution, addition time of foaming agent, and temperature, on the reaction kinetics and final properties of a porous IP. The IPs were formed by activating fayalite slag, a by-product of secondary copper production, with a sodium-silicate solution. Foaming was achieved by introducing metallic Al into the formulation, oxidizing it in the alkaline environment, liberating H2 gas, and entrapping it. Reaction kinetics were assessed using isothermal calorimetry, rheology, and a dedicated setup to record the foaming. The mechanical and physical properties of the foam were assessed via compressive strength and water absorption measurements. Microstructural analysis was undertaken using electron microscopy and computed tomography. The results showed that by decreasing the SiO2/Na2O ratio and/or increasing the temperature, the reaction kinetics were accelerated. Regarding the properties, postponing the initiation of the foaming led to more uniform and smaller pores, resulting in an increased compressive strength-to-density ratio. 相似文献
This study reports on the impact of the curing conditions on the mechanical properties and leaching of inorganic polymer (IP) mortars made from a water quenched fayalitic slag. Three similar IP mortars were produced by mixing together slag, aggregate and activating solution, and cured in three different environments for 28 d: a) at 20 °C and relative humidity (RH) ~ 50% (T20RH50), b) at 20 °C and RH≥90% (T20RH90) and c) at 60 °C and RH ~ 20% (T60RH20). Compressive strength (EN 196-1) varied between 19 MPa (T20RH50) and 31 MPa (T20RH90). This was found to be attributed to the cracks formed upon curing. Geochemical modelling and two leaching tests were performed, the EA NEN 7375 tank test, and the BS EN 12457-1 single batch test. Results show that Cu, Ni, Pb, Zn and As leaching occurred even at high pH, which varied between 10 and 11 in the tank test’s leachates and between 12 and 12.5 in the single batch’s leachates. Leaching values obtained were below the requirements for non-shaped materials of Flemish legislation for As, Cu and Ni in the single batch test.
The impact of boron doping level of nanocrystalline diamond (NCD) films on the character of cell growth (i.e., adhesion, proliferation and differentiation) is presented. Intrinsic and boron-doped NCD films were grown on Si/SiO2 substrates by microwave plasma CVD process. The boron-doped samples were grown by adding trimethylboron (TMB) to the gas mixture of methane and hydrogen. Highly resistive (0 ppm), semiconducting (133 or 1000 ppm), and metallic-like (6700 ppm) NCD films were tested as the artificial substrates for the cultivation of osteoblast-like MG 63 cells. The conductivity and surface charge increased monotonically with the increasing boron content. All NCD substrates showed good biocompatibility and stimulated the adhesion and growth of MG 63 cells. Higher osteocalcin concentration (by more than 30%) for the cells growing on 1000 and 6700 ppm boron-doped NCD films was found which indicates an enhancement in the cell growth biochemistry. 相似文献
The hydraulic behavior of synthetic merwinite was investigated after activation by two different methods, aiming to enhance its hydraulic activity which is weak in water. Mechanical activation, by means of extensive milling in a bead mill, led to amorphization of merwinite and a decrease in its crystallite size. The combined effect of higher specific surface area and of structural disorder resulted in a notable increase of hydraulic reactivity. The hydraulic reactivity was substantially more pronounced with chemical activation compared to mechanical activation. Crystalline and amorphous C‐S‐H and brucite were the main hydration products formed in the hydrated, mechanically activated merwinite, whereas portlandite precipitated additionally in the case of chemical activation. Spectroscopic analyses of FTIR and 29Si MAS NMR verified the C‐S‐H formation. TEM investigations revealed formation of Mg‐low C‐S‐H gel around the merwinite particles. Both mechanically and chemically activated merwinite systems were capable of developing mechanical strength. 相似文献
Bacteriorhodopsin (BR) is a robust light-driven proton pump embedded in the purple membrane of the extremophilic archae Halobacterium salinarium . Its photoactivity remains in the dry state, making BR of significant interest for nanotechnological use. Here, in a novel configuration, BR was depleted from most of its endogenous lipids and covalently and asymmetrically anchored onto a gold electrode through a strategically located and highly responsive cysteine mutation; BR has no indigenous cysteines. Chemisorption on gold was characterized by surface plasmon resonance, reductive striping voltammetry, ellipsometry, and atomic force microscopy (AFM). For the first time, the conductance of isolated protein trimers, intimately probed by conducting AFM, was reproducibly and reversibly switched under wavelength-specific conditions (mean resistance of 39 ± 12 MΩ under illumination, 137 ± 18 MΩ in the dark), demonstrating a surface stability that is relevant to potential nanodevice applications. 相似文献
Argon oxygen decarburization (AOD) slag represents more than 50 wt% of the slag from stainless steel production. Although some applications are available, e.g., as aggregates for road constructions or fertilizers, they are characterized by low economic value and limited applicability. In order to increase the economic value of AOD slag, alternative applications have been proposed, e.g., as partial or full replacement for Ordinary Portland Cement (OPC). The work presented here investigates whether the adaptation of the AOD slag chemistry within a high temperature process leads to an improvement of its hydraulic properties and thereby can demonstrate its potential to be converted into a hydraulic binder suitable for OPC replacement. For this purpose, three synthetic AOD slags with basicities (CaO/SiO2) of 2.0, 2.2, and 2.4 were synthesized, and the effect of the CaO/SiO2 ratio on the material stability, the amount of tricalcium silicate formed, and their hydraulic properties investigated. X‐ray diffraction, scanning electron microscope (SEM), and isothermal calorimetry analysis were used to characterize the microstructure and the hydraulic activity. The results show that the proposed method is indeed a promising way to stabilize a stainless steel AOD slag and convert it into a hydraulic binder. 相似文献
This work aims to assess the possibility of using ladle metallurgy and argon oxygen decarburization stainless steel slag as a hydraulic binder after mechanical activation. Prolonged milling in ethanol suspension resulted in 10-fold increase of the surface area and increase of the amorphous phase. Calorimetric analysis of slags mixed with water indicated the occurrence of exothermic reactions. XRD results revealed that periclase, merwinite, γ-C2S and bredigite, decreased with hydration time. Thermogravimetric analyses indicated that the main hydration products are most probably C–S–H, CH and MH. The hydrated products in both slags were similar to C–S–H gel. WDS analysis demonstrated Ca and Si to be widespread in the structure. Formation of M–S–H gel or incorporation of Mg in the C–S–H gel remains uncertain. The 90 days compressive strength of mortars prepared from slags reached approximately 20% for LM and 10% for AOD of the compressive strength of mortars prepared from OPC. 相似文献