In situ measurements of human cough aerosol hygroscopicity

The airborne dynamics of respiratory droplets, and the transmission routes of pathogens embedded within them, are governed primarily by the diameter of the particles. These particles are composed of the fluid which lines the respiratory tract, and is primarily mucins and salts, which will interact with the atmosphere and evaporate to reach an equilibrium diameter. Measuring organic volume fraction (OVF) of cough aerosol has proved challenging due to large variability and low material volume produced after coughing. Here, the diametric hygroscopic growth factors (GF) of the cough aerosol produced by healthy participants were measured in situ using a rotating aerosol suspension chamber and a humidification tandem differential mobility analyser. Using hygroscopicity models, it was estimated that the average OVF in the evaporated cough aerosol was 0.88 ± 0.07 and the average GF at 90% relative humidity (RH) was 1.31 ± 0.03. To reach equilibrium in dry air the droplets will reduce in diameter by a factor of approximately 2.8 with an evaporation factor of 0.36 ± 0.05. Hysteresis was observed in cough aerosol at RH = ∼35% and RH = ∼65% for efflorescence and deliquescence, respectively, and may depend on the OVF. The same behaviour and GF were observed in nebulized bovine bronchoalveolar lavage fluid.     

Multiple Scan Chain Design for Two-Pattern Testing

Non-standard fault models often require the application of two-pattern testing. A fully-automated approach for generating a multiple scan chain-based architecture is presented so that two-pattern test sets generated for the combinational core can be applied to the sequential circuit. Test time and area overhead constraints are considered.     

EEG spectral abnormalities and psychosis as predictors of cognitive and functional decline in probable Alzheimer's disease

We examined whether either psychotic features (e.g., delusions and hallucinations) or EEG abnormalities are associated with more rapid progression of Alzheimer's disease (AD). AD patients with psychosis have exhibited more EEG abnormalities than those without psychosis, and both abnormal EEG and psychosis have been noted to be predictors of functional and cognitive decline in AD. Ninety-five probable AD patients participating in a longitudinal study of dementia had an EEG and a semistructured psychiatric interview at baseline. Using EEG spectral analysis, we classified records as normal/abnormal based on the parasagittal mean frequency. Patients with abnormal EEGs were more functionally (e.g., Blessed Rating Scale for activities of daily living) and cognitively (e.g., Mini-Mental State) impaired than patients with normal EEG. AD patients with psychosis were only more functionally impaired than patients without psychosis. A two-factor analysis showed no interaction between abnormal EEG and psychosis. In addition, using a Cox proportional hazard model adjusted for age and education, the presence of an abnormal EEG or psychotic symptom at study entry was associated with higher risk of reaching severe cognitive and functional impairment during follow-up. Neither abnormal EEG nor the presence of psychosis predicted death. These results indicate that both abnormal EEG and psychosis are independent predictors of disease progression but not of physical survival.     

Display reflectance: Basics,measurement, and rating

Abstract— In this paper, methods and instruments for measurement and evaluation of reflection characteristics are reviewed as needed for research and development of electronic displays and for material and surface modeling with ray‐tracing and rendering software packages. Contrast under ambient illumination and recognizability under daylight illumination are prime development targets in the electronic‐display field, while computation and synthesis of realistic scenes and objects are pushing the need for physical data in computer graphics applications. Three categories of instruments are available for detailed reflection analysis. They are based on (1) gonioscopic (mechanical) and conoscopic (optical) directional scanning, (2) imaging approaches, and (3) on arrangements with variable source or receiver aperture. The capabilities, advantages, and limitations of these methods are introduced and discussed in order to facilitate appropriate selection of methods and instruments. For illustration purposes we present typical results obtained from commercial electronic display screens. A basis for continued widespread implementation and standardization of reflection metrology as required for objective rating and comparison of electronic‐display screen performance under ambient illumination is provided.     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.     

Overcoming the challenges in deploying user provisioning/identity access management backbone

This paper sets out to share BT's leadership and experience by determining the identity management opportunities and issues, then document the lessons learnt in previous deployments and recommend strategies for all types and sizes of organisation. Today's ICT environment has created a mixed approach to access management across sectors. Browser-based any time, anywhere, anyone access, coupled with the business need to access more systems and services across a changing infrastructure of distributed platforms and networked services, has changed the administrative landscape. Enterprises are being forced to add administrative support staff or invest in technology-driven process change. At the same time, users are undergoing significant change, creating new expectations in service quality. Moreover, regulatory bodies are demanding confirmation that processes granting access are controlled and documented. In this world of increasing demands, complexity and expectation, the service management tools, techniques and options available to improve user access management are as varied and numerous as the issues faced by management in their deployment. Identity management is widely heralded as an opportunity to improve the end user experience, reduce costs, improve security and deliver regulatory compliance — but is often misunderstood. Projects regularly fail to achieve the expected benefits. These failures are the result of expectations being inappropriately set, deployment of solutions turning out to be more complex or taking longer than expected, and/or products selected before required functionality has been determined. For the larger more mature organisations, or those organisations that are the amalgamation of mergers and acquisitions, the dilemma is where to start and what approach to take.     

Comparison of two methods of surfactant administration and the effect on dosing-associated hypoxemia

OBJECTIVE: The purpose of our study was to test the hypothesis that surfactant dosing through a proximal sideport adapter on an endotracheal tube leads to more dosing-associated hypoxemia compared with a method of dosing that uses a double-lumen endotracheal tube. STUDY DESIGN: Using adequate sample size to compare significant changes in O2 saturation (power > 0.8, alpha < 0.05) we enrolled 36 infants with respiratory distress syndrome in this randomized trial. A 10% change in O2 saturation was considered clinically significant. Nineteen infants received 38 doses of surfactant through the sideport adapter. Seventeen infants received 31 doses of surfactant through the nonventilation lumen of a double-lumen endotracheal tube. Two main outcome measures were assessed: time-averaged O2 saturation values 30 minutes after dosing and the largest absolute fall in O2 saturation for each patient. RESULTS AND CONCLUSIONS: Time-averaged O2 saturation measures were higher in the proximal sideport group (p = 0.02), but the magnitude of difference was probably not clinically significant. No significant difference was detected between groups when we compared largest absolute drop in O2 saturation. Secondary analyses found no effect of birth weight or dose number (second vs third dose) on either outcome measure.     

Using MineSet for knowledge discovery

MineSet aids knowledge discovery and supports decision making based on relational data. It uses visualization and data mining to arrive at interesting results. Providing diverse visualization tools lets users choose the most appropriate method for a given problem. The client-server architecture performs most of the computationally intensive tasks on a server, while the processed results return to the client for visualization. The paper discusses MineSet database visualization and data mining visualization