屏幕作为建筑元素的发展历程

立面和立面设计是建筑的基本要素,媒体立面是立面设计相对较新的分支领域。文章概述了媒体立面的设计与研究过程,并以六个项目为例介绍立面设计涉及的元素与子元素如何与通信技术相互结合。     

用于0.4 kV微电网的四桥臂APF改进型控制策略研究

采用无谐波检测控制原理,提出一种基于多内模原理的四桥臂APF改进型控制策略。首先通过等量代换直接将网侧电流、直流母线电压作为状态变量,建立四桥臂APF在αβγ静止坐标系下的数学模型。然后,针对应用于0.4 kV微电网的四桥臂APF的特殊要求:功率波动频繁、动态响应速度快,在αβγ静止坐标系下采用所提出的四桥臂APF改进型控制策略,即由比例积分PI、矢量谐振VR、重复控制RC构成的多内模复合控制器作为四桥臂APF的电流环控制器,使得四桥臂APF具有动态响应速度快、稳态精度高、计算量小的特点,为0.4 kV微电网的优质电能提供保障。最后通过仿真和实验验证所提控制策略的可行性。     

MC型埋刮板输送机的改进设计

针对原MC型埋刮板输送机在生产中出现的运转不稳定等问题,对刮板输送机机体的下料装置、刮爪形式、防粘装置进行了改进设计,并进行了生产验证。结果表明:改进后的刮板输送机运行平稳可靠、性能稳定,杜绝了跳链、断链等现象的发生,刮板输送机运载电流由20 A降到18 A,保证了油脂浸出车间的生产安全。     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

计量用脉冲Nd：YAG倍频激光器及其电源

介绍了脉冲Nd:YAG倍频激光器双波长（1064／532nm）3种输出的激光光路。1064nm输出的动静比可达0.40；KTP晶体外腔倍频效率可达0.50。介绍了稳定可靠的调Q电路、逻辑控制电路和开关电源的主电路及其参数计算。     

热处理对Ti-Mo-V-Nb-Al合金微观结构的影响

形状记忆合金由于其优良的超弹性和形状记忆效应而在医学上有着广泛的应用，其中由于NiTi形状记忆合金相较其它形状记忆合金具有更好的超弹性和生物相容性而得到了广泛的应用。但由于镍元素的毒性，使得开发一种生物相容性更好、无镍且具有良好力学性能的形状记忆合金成为必需。Ti-Mo-V-Nb-Al五元合金就是为此而开发的一种新型形状记忆合金。本研究用X射线衍射（XRD）、透射电子显微镜（TEM）和高分辨电子显微镜（HREM）研究了不同热处理条件对Ti-Mo-V-Nb-Al形状记忆合金微观结构的影响。     

噪声协方差估计在惯性导航系统误差模型中的仿真研究

在系统常值误差未知的情况下对线性时变随机系统误差协方差进行估计的新方法。该方法通过构造一个新的时间序列，其协方差由未知参数的线性组合组成，然后用递推最小二乘法来计算新序列的协方差，该方法并不需要任何关于噪声的先验知识。从仿真结果来看达到了满意的效果。     

硫酸厂主鼓风机的主要设计准则

论述现代硫酸厂主鼓风机设计时必须考虑的关键因素，通过实例讨论操作费用与投资之间的平衡关系以及对装置竞争力的影响。建议在硫酸厂严酷的操作条件下改进风机特性，提高耐磨性并采用维修友好的设计。     

硅胶固载光敏剂的合成及其在反式维生素D3光敏异构化为顺式维生素D3中的应用

采用丙二酸作为连接,针9－蒽甲醇连接到硅胶上生成硅胶固载的光敏剂。利用此因相光敏剂分别在乙醇和甲苯溶液中敏化反式维生素D3。实验结果表明，此固相光敏剂能够有效地敏化反式维生素D3为顺式维生素D3的反应，并且非常容易从反应体系中分离出来。     

Influence of Polyalkylmethacrylate VII on Boundary Film Formation,Friction,Wear and Efficiency of Lubricants

1 Influence of PAMAon Boundary Fil mFormation and Friction1.1 Experi mental methodsUltra-thin optical interferometry has been used tostudy thinlubricating fil ms for more than a decade and theexperi mental details of this technique have been reportedpreviously[1].The principle of the test setup is shown inFigure1.A polished steel ball is loaded and rolled againstthe flat surface of a glass disc that is coated with a thinsemi-reflecting chromiumlayer and a silica spacer of about500nmthickne…