Stepwise-Graded Si3N4–SiC Ceramics with Improved Wear Properties

The processing of stepwise graded Si₃N₄/SiC ceramics by pressureless co-sintering is described. Here, SiC (high elastic modulus, high thermal expansion coefficient) forms the substrate and Si₃N₄ (low elastic modulus, low thermal expansion coefficient) forms the top contact surface, with a stepwise gradient in composition existing between the two over a depth of ∼1.7 mm. The resulting Si₃N₄ contact surface is fine-grained and dense, and it contains only 2 vol% yttrium aluminum garnet (YAG) additive. This graded ceramic shows resistance to cone-crack formation under Hertzian indentation, which is attributed to a combined effect of the elastic-modulus gradient and the compressive thermal-expansion-mismatch residual stress present at the contact surface. The presence of the residual stress is corroborated and quantified using Vickers indentation tests. The graded ceramic also possesses wear properties that are significantly improved compared with dense, monolithic Si₃N₄ containing 2 vol% YAG additive. The improved wear resistance is attributed solely to the large compressive stress present at the contact surface. A modification of the simple wear model by Lawn and co-workers is used to rationalize the wear results. Results from this work clearly show that the introduction of surface compressive residual stresses can significantly improve the wear resistance of polycrystalline ceramics, which may have important implications for the design of contact-damage-resistant ceramics.     

Studies on lymphocyte subpopulations and the effect of age on immune competence in turkeys

We characterized the lymphocyte subpopulations and investigated the effect of age on cellular and humoral immunity, development of lymphoid organs, and the relative proportions of CD4+ and CD8+ cells in turkeys. The mitogenic responses of peripheral T cells were poorly developed at hatch but developed rapidly after hatch and reached adult levels by 2 weeks-of-age. The average percentage of CD4+ cells was 45, 29.8, and 26.3 in the thymi, peripheral blood, and spleens, respectively, in turkeys. The mean percentage of CD8+ cells in the thymi, peripheral blood, and spleens of turkeys was 53.8, 13.6, and 15.5, respectively. Age did not influence the relative proportions of CD4+ and CD8+ T cells in the spleens and peripheral blood of turkeys. The mean percentages of IgM+ cells in the bursae and spleens were 78.5 and 26.8, respectively. Day-old turkeys did not develop detectable antibodies to either thymus dependent or independent antigens. However, 2 week or older turkeys showed good humoral responses. Inoculation of BSA at hatch induced tolerance, whereas injection of SRBC did not. Analysis of relative organ weights of turkey lymphoid organs showed that spleens and thymi developed rapidly during the first week-of-age.     

Crack growth in transforming ceramics under cyclic tensile loads

The mechanisms of stable growth of short fatigue cracks (crack length up to 1 mm) at room temperature in magnesia-partially stabilized zirconia subjected to cyclic tensile loads were investigated. Single edge-notched specimens were fractured in the four-point bend configuration under cyclic and quasi-static tensile loads. At a load ratio of 0.1, the threshold stress intensity factor range, K, for fracture initiation in cyclic tension is as low as 3.4 M Pam^1/2, and catastrophic failure occurs at K=6.6 M Pam^1/2. For crack length less than 1 mm and for plane strain conditions, growth rates are highly discontinuous, and periodic crack arrest is observed after growth over distances of the order of tens of micrometres. Crack advance could only be resumed with an increase in the far-field stress intensity range. The mechanisms of short crack advance in cyclic tension are similar to those observed under quasi-static loads, and the tensile fatigue effect appears to be a manifestation of static failure modes. A model is presented to provide an overall framework for the tensile fatigue crack growth characteristics of partially stabilized zirconia. Experimental results are also described to demonstrate the possibility of stable room temperature crack growth under cyclic tension in fine-grained tetragonal zirconia polycrystals, partially stabilized with Y₂O₃. The growth of cracks in transformation-toughened ceramics is found to be strongly influenced by the crack size and shape, stress state and specimen geometry.     

Structural Studies of TeO2–SeO2–Na2O Glass System

Glass Physics and Chemistry - The growth of nanocrystalization in TeO2–SeO2–Na2O glasses is achieved by the conventional heat treatment method. The influence of Na2O concentration on...     

Strength, strain-rate sensitivity and ductility of copper with nanoscale twins

We present a comprehensive computational analysis of the deformation of ultrafine crystalline pure Cu with nanoscale growth twins. This physically motivated model benefits from our experimental studies of the effects of the density of coherent nanotwins on the plastic deformation characteristics of Cu, and from post-deformation transmission electron microscopy investigations of dislocation structures in the twinned metal. The analysis accounts for high plastic anisotropy and rate sensitivity anisotropy by treating the twin boundary as an internal interface and allowing special slip geometry arrangements that involve soft and hard modes of deformation. This model correctly predicts the experimentally observed trends of the effects of twin density on flow strength, rate sensitivity of plastic flow and ductility, in addition to matching many of the quantitative details of plastic deformation reasonably well. The computational simulations also provide critical mechanistic insights into why the metal with nanoscale twins can provide the same level of yield strength, hardness and strain rate sensitivity as a nanostructured counterpart without twins (but of grain size comparable to the twin spacing of the twinned Cu). The analysis also offers some useful understanding of why the nanotwinned Cu with high strength does not lead to diminished ductility with structural refinement involving twins, whereas nanostructured Cu normally causes the ductility to be compromised at the expense of strength upon grain refinement.     

A novel high power symmetric ZnO/carbon aerogel composite electrode for electrochemical supercapacitor

We present, for the first time, a new material of symmetric electrochemical supercapacitor in which zinc oxide (ZnO) with carbon aerogel (CA) was used as active material. Physical properties of ZnO/CA composite were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that ZnO has single hexagonal structure and the grain size increases with increase of ZnO compository. The result of cyclic voltammetry indicates that the specific capacitance of ZnO/CA composite in 6 M KOH electrolyte was approximately 25 F/g at 10 mV/s for 2:1 composition. AC impedance analysis reveals that ZnO with carbon aerogel powder enhanced the conductivity by reducing the internal resistance. Galvanostatic charge/discharge measurements were done at various current densities, namely 25, 50, 75, and 100 mA/cm². It was found that the cells have excellent electrochemical reversibility and capacitive characteristics in KOH electrolyte. The maximum capacitance of the ZnO/CA supercapacitor was 500 F/g at 100 mA/cm². It has been observed that the specific capacitance is constant up to 500 cycles at all current densities, which implies that the dendrite formation was controlled.