Laboratory study of air-water-coal combustion product (fly ash and FGD solid) mercury exchange

Recent laboratory research has indicated that coal fly ash derived from subbituminous and bituminous type coals is a sink for atmospheric mercury (Hg), however lignite-based ash was found to emit Hg to the air. Solids collected from systems with components that enhance Hg removal (i.e. activated carbon injection (ACI), flue gas desulfurization (FGD), and selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR)) may have higher Hg concentrations and therefore a higher potential for Hg release. For this study we investigated the potential for Hg release to the air and water from coal combustion products (CCPs) collected from coal-fired units with FGD equipment, SCR and SNCR equipment, and sorbent injection for Hg removal. In the laboratory study, most dry samples acted as sinks for atmospheric Hg in the dark at 25 °C. When exposed to light or increased temperature (45 °C), deposition of Hg to the fly ash substrates in most cases continued but decreased. Wet FGD samples emitted Hg. However, they became a sink for atmospheric Hg or exhibited low Hg emission rates when dried. Mercury flux in the dark at 25 °C was correlated with fly ash carbon content (LOI). Most liquid extracts derived using the synthetic precipitation leaching procedure (SPLP EPA method 1312) had very low Hg concentrations (<13 ng/l).     

Face relighting using discriminative 2D spherical spaces for face recognition

As part of the face recognition task in a robust security system, we propose a novel approach for the illumination recovery of faces with cast shadows and specularities. Given a single 2D face image, we relight the face object by extracting the nine spherical harmonic bases and the face spherical illumination coefficients by using the face spherical spaces properties. First, an illumination training database is generated by computing the properties of the spherical spaces out of face albedo and normal values estimated from 2D training images. The training database is then discriminately divided into two directions in terms of the illumination quality and light direction of each image. Based on the generated multi-level illumination discriminative training space, we analyze the target face pixels and compare them with the appropriate training subspace using pre-generated tiles. When designing the framework, practical real-time processing speed and small image size were considered. In contrast to other approaches, our technique requires neither 3D face models nor restricted illumination conditions for the training process. Furthermore, the proposed approach uses one single face image to estimate the face albedo and face spherical spaces. In this work, we also provide the results of a series of experiments performed on publicly available databases to show the significant improvements in the face recognition rates.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Low velocity impact of combination Kevlar/carbon fiber sandwich composites

Impact, compression after impact, and tensile stiffness properties of carbon fiber and Kevlar combination sandwich composites were investigated in this study. The different samples consisted of impact-side facesheets having different combinations of carbon fiber/Kevlar and carbon fiber/hybrid. The bottom facesheets remained entirely carbon fiber to maintain the high overall flexural stiffness of the sandwich composite. The focus of this research was to determine if any improvement in impact properties existed as a result of replacing the impact-side facesheet layers of carbon fiber with Kevlar or hybrid. Impact tests were conducted on different sample types to obtain information about absorbed energy and maximum impact force. Also, compression after impact tests were conducted to determine the reduction in compressive strength when comparing impacted to non-impacted samples. The elastic moduli of carbon fiber, Kevlar, and hybrid were determined from tensile testing. This data was used to characterize the reduction in stiffness from replacing carbon fiber layers with the Kevlar or hybrid layers. The experimental data in its entirety helps define the benefits and disadvantages of replacing carbon fiber layers with Kevlar or hybrid.     

Introduction of sulfhydryl groups and disulfide linkage to mungbean 8Sα globulin and effects on physicochemical and functional properties

Sulfhydryl groups and disulfide bond were introduced in mungbean's major storage protein, 8Sα globulin, by protein engineering to improve structural stability and functional properties. Five modified proteins or mutants (F59C, I99C, A213C, one free sulfhydryl group; I99C/A213, one disulfide bridge; F59C/I99C/A213C, one free sulfhydryl group and one disulfide linkage) were expressed in Escherichia coli at a yield similar to that of the unmodified protein or wild type (WT) in soluble form (38%). The number of introduced groups in the mutants was confirmed by Ellman analysis. Mutant and WT proteins exhibited similar elution patterns on gel filtration indicating their trimeric native conformation. Mutants had 2 to 3.8 °C higher T_m values than WT and were digested by chymotrypsin at 52–58% in 60 min but exhibited different digestion patterns. All mutants showed greater hardness of heat-induced gels than WT, especially I99C/A213C and F59C/I99C/A213C. Results indicate the improved structural stability of the modified 8Sα globulin.     

Evaluation of mixing profiles for a new micromixer design strategy

The relationship between mixing history and reaction performance in microreactors using computational fluid dynamics (CFD) simulations is identified. In the idealized, simplified mixing model, mixing proceeds linearly and only the mixing time determined the reaction performance. However, in the case of realistic models where mixing proceeds unequally, the partial rapid progression of mixing, more than the mixing time, significantly impacts the reaction. The use of the fluid segment size distribution to capture this effect is proposed. The effective Damköhler number derived from the fluid segment size distribution predicted the reaction yield well. To demonstrate the utility of the mixing profile design strategy, we fabricated a novel micromixer with multiple partial rapid mixing zones. This micromixer achieved excellent results both in a CFD simulation and an experiment. © 2015 American Institute of Chemical Engineers AIChE J, 62: 1154–1161, 2016     

Air-soil exchange of mercury from background soils in the United States

The air-surface exchange of mercury (Hg) was measured, using a dynamic polycarbonate flux chamber, for soils with low or "background" Hg concentrations (<0.1 mg/kg) at eleven locations across the contiguous United States. Sampling locations included agricultural, desert, grassland, mixed and pine forest ecosystems (n=1326 soil flux measurements at 46 individual sites). An overall soil Hg flux of 0.9+/-0.2 ng/m2/h for these background soils was obtained by averaging the means for the different locations. Soil Hg fluxes were significantly lower in dark conditions than in the light for all but the grassland sites. Mean inlet air Hg concentrations were 1.0+/-0.1 ng/m3 in the dark and 1.3+/-0.2 ng/m3 in the light. Soil temperature inside and outside of the chamber, air temperature, relative humidity, and irradiance were measured concurrently with soil Hg flux. Soil-air Hg exchange was weakly predicted by environmental variables (R2 from 0.07 to 0.52). For a single location, flux was better correlated with soil moisture than other measured environmental parameters, suggesting that soil moisture might be an important driver for Hg emissions from background soils. In addition, based on data collected we suggest some quality control measures for use of Tekran 2537A analyzers when measuring low mercury fluxes. Using basic scaling procedures, we roughly estimate that natural emissions from soils in the contiguous U.S. release approximately 100 Mg/yr of Hg to the atmosphere.     

Are mercury emissions from geologic sources significant? A status report

Geologic sources of atmospheric mercury include areas of fossil and current geothermal activity, recent volcanic activity, precious and base metal deposits, and organic rich sedimentary rocks. Early estimates of emissions from these sources were not based on measurements of mercury fluxes but implied based on the difference between emissions from anthropogenic point sources and wet/dry deposition estimates. In the past approximately 7 years significant progress has been made in development of methods for the measurement of mercury emissions, definition of those parameters most important in controlling emissions and scaling up emissions from natural source areas. This paper summarizes the work done on scaling of emissions from discrete areas of natural enrichment and from the State of Nevada, which is situated within a global belt of mercury enrichment. Preliminary data indicate that elemental mercury is the predominant (>95%) form of mercury being emitted from these sources. Scaling results suggest that the value used in early models to represent emissions from global mercuriferous belts is too low by at least three times.     

Component-based robot system design for grasping tasks

The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer, sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot.