Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level

A new kind of molecularly imprinted polymer-modified graphite electrode was fabricated by “grafting-to” approach, incorporating sol–gel technique, for the detection of acute deficiency in serum ascorbic acid level (SAAL), manifesting hypovitaminosis C. The modified electrode exhibited ascorbic acid (AA) oxidation at less positive potential (0.0 V) than the earlier reported methods, resulting in a limit of detection as low as 6.13 ng mL⁻¹ (RSD = 1.2%, S/N = 3). The diffusion coefficient (1.096 × 10⁻⁵ cm² s⁻¹), rate constant (7.308 s⁻¹), and Gibb's free energy change (−12.59 kJ mol⁻¹) due to analyte adsorption, were also calculated to explore the kinetics of AA oxidation. The proposed sensor was found to enhance sensitivity substantially so as to detect ultra trace level of AA in the presence of other biologically important compounds (dopamine, uric acid, etc.), without any cross interference and matrix complications from biological fluids and pharmaceutical samples.     

Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

Relative merits of ultrasonography, computed tomography and cholangiography in patients of surgical obstructive jaundice

Fifty consecutive patients with surgical obstructive jaundice were evaluated prospectively with ultrasonography (US), computed tomographic scans (CT scan) and cholangiography-percutaneous transhepatic cholangiography (PTC) or endoscopic retrograde cholangio-pancreaticography (ERCP). The diagnostic accuracy of ultrasound in defining the level of obstruction was 86% as compared to 86% and 94.8% for CT scan and cholangiography, respectively. To measure the etiology of the obstruction, the accuracy of ultrasound, CT scan and cholangiography were 84%, 86% and 75%, respectively. The sensitivity of CT scans and cholangiography in the diagnosis of choledocholithiasis was 100%, 81.8% and 90%, respectively, whereas specificity was 97%, 100% and 100%, respectively. Sensitivity for a diagnosis of malignant disease was 100% for both US and CT scans whereas specificity was 90% and 81%, respectively. Ultrasonography as a single radiological investigation is sufficient in the evaluation of the majority of patients with surgical obstructive jaundice. CT scan and cholangiography should be done only when US gives equivocal findings or if concomitant therapeutic procedures like basketing and stenting are also planned.     

Growth of polysilicon and silicide films for MOS-VLSI application

Doped and undoped polycrystalline silicon films were grown byapcvd and thermal evaporation techniques. The effect of growth and annealing conditions on the crystalline nature of the films and their properties were studied by electrical, optical, x-ray diffraction andsem techniques. Metal silicides such as TiSi₂ and PtSi₂ were prepared by co-evaporation technique over polysilicon layers to study their suitability in microelectronic applications. Some of the properties of polysilicon and silicides are discussed.     

Approaches to the Preparation of Enantiomerically Pure (2R,2′R)‐(+)‐threo‐Methylphenidate Hydrochloride

Various approaches to the preparation of enantiomerically pure (2R,2′R)‐(+)‐threo‐methylphenidate hydrochloride ( 1 ) are reviewed. These approaches include synthesis using enantiomerically pure precursors obtained by resolution, classical and enzyme‐based resolution approaches, enantioselective synthesis approaches, and approaches based on enantioselective synthesis of (2S,2′R)‐erythro‐methylphenidate followed by epimerization at the 2‐position. 1 Introduction 2 Methods for the Enhancement of Enantiomeric Purity of 1 3 Approaches Using Enantiomerically Pure Precursors Obtained by Resolution 4 Classical Resolution Approaches 4.1 Resolution of Amide and Acid Derivatives 4.2 Resolution of (±)‐threo‐Methylphenidate 5 Enzyme‐Based Resolution Approaches 6 Enantioselective Synthesis Approaches 7 Approaches Based on Enantioselective Synthesis of (2S,2′R)‐erythro‐Methylphenidate and Epimerization 8 Conclusions     

Efficient and Practical Syntheses of (R)‐(5‐Amino‐2,3‐dihydro‐1H‐inden‐2‐yl)‐carbamic Acid Methyl Ester

Efficient and practical syntheses of enantiomerically pure (R)‐(5‐amino‐2,3‐dihydro‐1H‐inden‐2‐yl)‐carbamic acid methyl ester ( 1 ) by three different routes via the resolution of different aminoindan intermediates are described.     

Experimental evaluation of the stress distribution on the outer surface of the outer race of conventional and double‐decker high‐precision bearings

Experimental investigations have been carried out on the stress distribution on the outer surface of the outer race of conventional and double‐decker high‐precision bearings (DDHPBs). The investigations, in general, indicate that the overall level of stress variation on conventional bearings in various modes of loading under static conditions is greater than that of DDHPBs having an identical inner bore. The cyclic stress levels have been found to be higher for the outer race of conventional bearings compared to that of DDHPBs. Also, the frequency of stress cycles on the outer race of conventional bearings is greater than that of DDHPBs. A comparison of the stress distribution pattern indicates that, under identical loads, the ratio of deflection to indentation on the elements of DDHPBs and conventional bearings is less than unity. Also, under identical operating conditions, the ratio of stresses due to centrifugal forces on the elements of DDHPBs and conventional bearings of the same bore and outer diameter is less than unity. It is concluded that the life of DDHPBs as compared to conventional bearings should be longer under identical operating conditions.     

Nano-liposomal dry powder inhaler of Amiloride Hydrochloride

The purpose of this study was to encapsulate Amiloride Hydrochloride into nano-liposomes, incorporate it into dry powder inhaler, and to provide prolonged effective concentration in airways to enhance mucociliary clearance and prevent secondary infection in cystic fibrosis. Liposomes were prepared by thin film hydration technique and then dispersion was passed through high pressure homogenizer to achieve size of nanometer range. Nano-liposomes were separated by centrifugation and were characterized. They were dispersed in phosphate buffer saline pH 7.4 containing carriers (lactose/sucrose/mannitol), and glycine as anti-adherent. The resultant dispersion was spray dried. The spray dried powders were characterized and in vitro drug release studies were performed using phosphate buffer saline pH 7.4. In vitro and in vivo drug pulmonary deposition was carried out using Andersen Cascade Impactor and by estimating drug in bronchial alveolar lavage and lung homogenate after intratracheal instillation in rats respectively. Nano-liposomes were found to have mean volume diameter of 198 +/- 15 nm, and 57% +/- 1.9% of drug entrapment. Mannitol based formulation was found to have low density, good flowability, particle size of 6.7 +/- 0.6 microm determined by Malvern MasterSizer, maximum fine particle fraction of 67.6 +/- 0.6%, mean mass aerodynamic diameter 2.3 +/- 0.1 microm, and geometric standard deviation 2.4 +/- 0.1. Developed formulations were found to have prolonged drug release following Higuchi's Controlled Release model and in vivo studies showed maximal retention time of drug of 12 hrs within the lungs and slow clearance from the lungs. This study provides a practical approach for direct lung delivery of Amiloride Hydrochloride encapsulated in liposomes for controlled and prolonged retention at the site of action from dry powder inhaler. It can provide a promising alternative to the presently available nebulizers in terms of prolonged pharmacological effect, reducing systemic side effects such as potassium retention due to rapid clearance of the drug from lungs in patients suffering from cystic fibrosis.