Enhancement of glass-ceramic performance by TiO2 doping: In vitro cell viability,proliferation, and differentiation

A new TiO₂-containing bioactive glass and glass-ceramics based on 50SiO₂-(45-X)CaO-(XTiO₂)-5P₂O₅ system was designed using a sol–gel technique (where X = 5, 7.5 and 10 wt %). The roles of the crystallization behavior and physicochemical characteristics of the designed glass and glass-ceramics which were played in the introduction of TiO₂ substitutions were investigated. Moreover, cell proliferation and differentiation were evaluated against human osteosarcoma cells (Saos-2). The TiO₂/CaO replacements led to the formation of a stronger glass structure and thus increased thermal parameters and the chemical stabilization of the designed materials. The FTIR data confirmed the existence of Ti within the glass and glass-ceramics samples, and no remarkable effect on their chemical integrity was observed. The XRD patterns indicated that calcium-containing minerals, including Ca₂SiO₄,Ca₃(PO₄)₂, Ca(Ti,Si)O₅, CaTiSiO₅, and Ca₁₅(PO₄)₂·(SiO₄)₆ phases were developed as a role of structure/texture under the applied heat-treatment. The results of the cytotoxicity test proved that a safe sample dose is 12–50 μg/ml, at which cell viability is ≥ 85%. The cell differentiation determined by ALP test proved the superiority of glass-ceramics compared with their native glasses. Therefore, the obtained materials could be safely used as novel biocompatible materials for the regeneration of bone tissue.     

Quantum Inspired Broadband Photonic Absorber: Potential Application as Solar Sail along with Mobility Analysis

Electromagnetic wideband absorption is still perceived as a critical and formidable challenge to address with an unambiguous photonic absorber. Subwavelength metamaterial (MM) unit cells with unique and controlled features have recently gained considerable interest. However, meta-atoms, generated using a quantum-inspired pattern distribution, are underwhelming in existing literature to design photonic absorbers and their potential application to manufacture solar sails is still quite uncommon. In this article, to create a flexible, polarization-insensitive, ultrathin, and broadband MM absorber, quantum interference pattern-inspired design is utilized. Herein, a novel approach to fabricating solar sails for the space exploration incorporates the proposed broadband photonic absorber rather than conventional reflectors. The quantum-inspired meta-absorber (QIMA) exhibits an absorption of over 91% for the visible domain, i.e., 380–800 nm under a conventional plane-polarized source. It is shown in the study that broadband absorbers are almost equivalent to excellent reflectors to design the solar sails in terms of the time-averaged force calculated by utilizing the Maxwell stress tensor method. Thus, the QIMA has the potential to be a viable alternative to reflectors in the design of futuristic solar sails for space exploration. The interference theory model is also utilized to assure the dependability of calculated data, and additionally, the standard AM1.5 solar spectrum is utilized to demonstrate the QIMA's solar-harvesting potentiality.     

Double-diffusive convection with variable viscosity from a vertical truncated cone in porous media in the presence of magnetic field and radiation effects

This work is focused on the study of combined heat and mass transfer or double-diffusive convection near a vertical truncated cone embedded in a fluid-saturated porous medium in the presence of thermal radiation, magnetic field and variable viscosity effects. The viscosity of the fluid is assumed to be an inverse linear function of the fluid temperature. A boundary-layer analysis is employed to derive the non-dimensional governing equations. The governing equations for this investigation are transformed into a set of non-similar equations and solved numerically using the fourth-order Runge–Kutta integration scheme with the Newton–Raphson shooting technique. Comparisons with previously published work on special cases of the problem are performed and the results are found to be in excellent agreement. A parametric study illustrating the influence of the radiation parameter, magnetic field parameter, viscosity-variation parameter, buoyancy ratio and the Lewis number on the fluid velocity, temperature and solute concentration profiles as well as the Nusselt number and Sherwood number is conducted. The results of this parametric study are shown graphically and the physical aspects of the problem are highlighted and discussed.     

An optimal procedure for minimizing total weighted resource tardiness penalty costs in the resource-constrained project scheduling problem

We present an optimal solution procedure for minimizing total weighted resource tardiness penalty costs in the resource-constrained project scheduling problem. In this problem, we assume the constrained renewable resources are limited to very expensive equipments and machines that are used in other projects and are not available in all periods of time of a project. In other words, for each resource, there is a dictated ready date as well as a due date such that no resource can be available before its ready date but the resources are permitted to be used after their due dates by paying penalty cost depending on the resource type. We also assume that only one unit of each resource type is available and no activity needs more than it for execution. The objective is to determine a schedule with minimal total weighted resource tardiness penalty costs. For this purpose, we present a branch-and-bound algorithm in which the branching scheme starts from a graph representing a set of conjunctions (the classical finish-start precedence constraints) and disjunctions (introduced by the resource constraints). In the search tree, each node is branched to two child nodes based on the two opposite directions of each undirected arc of disjunctions. Selection sequence of undirected arcs in the search tree affects the performance of the algorithm. Hence, we developed different rules for this issue and compare the performance of the algorithm under these rules using a randomly generated benchmark problem set.     

Effect of light intensity and frequency of flashing light from blue light emitting diodes on astaxanthin production by Haematococcus pluvialis

Flashing light from blue light emitting diodes is an effective method for the reduction of energy consumption in the bioproduction of astaxanthin by Haematococcus pluvialis. We investigated the effects of light intensity and frequency on the final astaxanthin concentration in bioproduction by H. pluvialis grown mixotrophically. The final astaxanthin concentration under illumination with flashing light, with frequencies ranging from 25 to 200 Hz, was dependent on the light intensity and on the duty cycle and was equivalent, or higher, in comparison with that under illumination with continuous light at the same incident intensity. The light intensity determined the maximum attainable concentration of astaxanthin under continuous illumination. Under illumination with flashing light, the ratio of the final astaxanthin concentration to the maximum concentration at a specific light intensity was correlated to the duty cycle in the frequency range from 25 to 200 Hz. The effect of lower frequencies on enhanced astaxanthin production under flashing light was also studied; at levels as low as 1 Hz, higher final astaxanthin concentrations were observed under flashing light compared to concentrations attained under continuous light.     

Green synthesis of zinc oxide nanoparticles using Amygdalus scoparia Spach stem bark extract and their applications as an alternative antimicrobial,anticancer, and anti-diabetic agent

For the first time in this study, Zinc oxide nanoparticles were biosynthesized by the eco-friendly and cost-effective procedure using Amygdalus scoparia stem bark extract then used as antibacterial, antifungal, anticancer, and anti-diabetic agents. The characterization techniques confirmed the biosynthesis, crystalline nature, structure, size, elemental composition of ZnO NPs and bioactive compounds that exist in A. scoparia extract accounting for Zn²⁺ ion reduction, capping and stabilization of ZnO NPs. The ZnO NPs displayed remarkable inhibitory activity against E. coli, E. aerigenes, S. aureus, P. oryzae, F. thapsinum, and F. semitectum compared to antibiotic standards. The ZnO NPs showed significant inhibitory effects on cancer cell lines, while it had no toxic effect on Vero normal cell line. The ZnO NPs (30 mg/kg)-treated diabetic rats showed significantly higher levels of insulin and lower AST, ALT and blood glucose compared with the STZ induced diabetic group and other treated groups (P < 0.05). The ZnO NPs- and extract-treated rats showed significantly higher levels of IR, GluT2, and GCK expression and lower TNFα expression compared with the STZ induced diabetic rats. Our findings showed that ZnO NPs represented an outstanding performance for biological applications.     

Preparation of AgO<Subscript>2</Subscript>/GrO nanocomposites by hydrothermal method and investigation of photoluminescence properties

This paper reports a novel processing route for producing AgO₂/GrO nanocomposites by hydrothermal method. AgO₂/GrO nanocomposites as semiconductor materials have been synthesized via a facile one-step process using AgNO₃ and glucose as starting reagents. We investigated the influence of the thermal decomposition temperature and reaction time, on the morphology and the particle size of AgO₂/GrO nanocomposites. The AgO₂/GrO nanocomposites were characterized by FT-IR, UV–Vis spectra, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy. The obtained results exhibited that the synthesized nano product by calcining for 4 h showed excellent uniformity and quality.     

Ontogeny of the testicular excurrent duct system of male Japanese quail (Coturnix japonica): A histological,ultrastructural, and histometric study

The testicular excurrent duct system undergoes several physiological and morphological changes during the reproductive stage or breeding season in mammals, birds, and reptiles. Studies on normal age-related histomorphological changes in the excurrent duct system of Japanese quails (Coturnix japonica) remain unreported, despite the extensive use of this bird as an avian model in research studies. The current study investigated the histological, ultrastructural, and histometric changes in the testicular excurrent duct system of the Japanese quail during three reproductive stages, namely prepubertal, pubertal, and adult. Simple squamous to low cuboidal cells formed the epithelia of the rete testis in prepubertal and pubertal birds, while in adult birds the lining was low cuboidal to cuboidal. In pubertal and adult birds, the nonciliated Type I epithelial cells of the proximal efferent duct displayed a subapical endocytotic apparatus comprising coated pits, coated apical tubules, and endosomes. There was a significant increase (p ≤ .001) in epithelial heights of all ducts of the excurrent duct system in the mature, sexually active, adult birds when compared to the other age groups. The luminal and tubular diameters, and the cross-sectional areas of efferent ducts and the epididymal duct unit increased significantly (p ≤ .001) with age. It is concluded that the morphology and morphometry of the excurrent ducts of the testis of the Japanese quail change as birds mature.     

The impact of baking conditions on physico-chemical characteristics influencing topography and appearance aspects of polyurethane coatings

The appearance aspects of an electrodeposited polyurethane-based coating as a function of baking condition were investigated. Specular gloss and color was measured as a mean to trace the changes of the surface topography due to baking conditions. Atomic force microscopy combined with FTIR spectroscopic investigations showed that the shrinkage occurred due to the high baking temperature results in surface roughness. Films baked at higher temperature form higher-T_g networks. The color was changed to yellow as the baking temperature was raised.