Treating smokers before the quit date: can nicotine patches and denicotinized cigarettes reduce cravings?

The present study investigated whether treatment with the combination of denicotinized cigarettes and 21-mg nicotine patch for 2 weeks before a designated quit date could lessen cravings for smoking, thereby helping smokers abstain from smoking. The study was a randomized controlled clinical trial conducted at Roswell Park Cancer Institute, Buffalo, New York, in 2004 and 2005. Patients included 98 adult heavy smokers (using 20 or more cigarettes/day). Half of the subjects received 2 weeks of combination of denicotinized cigarettes (Quest 3) and 21-mg nicotine patch for 2 weeks before the quit date. The remaining smokers were switched to light cigarettes (Quest 1) during the 2 weeks before the quit date. After the quit date, all subjects received counseling for smoking cessation and were provided nicotine patches for up to 8 weeks after the quit date. Self-reported cravings for smoking, withdrawal symptoms, and smoking abstinence were measured at predetermined intervals using phone-based surveys and in clinical visits. The group that used denicotinized cigarettes and nicotine patch before quitting reported less frequent and less intense cravings for cigarettes in the 2 weeks before and after the designated quit date. Self-reported withdrawal symptoms and quit rates did not differ significantly between the groups. The use of a denicotinized cigarette combined with the nicotine patch appears to lessen cravings to smoke in the immediate postcessation period. A larger, better-powered study is needed to test if this treatment combination has merit for increasing quit rates.     

Semi-automated feature-tracking of East Antarctic sea ice from Envisat ASAR imagery

While feature tracking of sea ice using cross-correlation methods on pairs of satellite Synthetic Aperture Radar (SAR) images has been extensively carried out in the Arctic, this is not the case in the Antarctic. This is due to the dynamic nature of Antarctic pack ice, its microwave signature, the tendency for SAR swath paths to be poorly aligned with the often narrow sea ice zone around the continent and inadequate satellite sampling. A semi-automated system, known as IPADS (IMCORR [IMageCORRelation] Processing, Analysis and Display System), has been developed to map fast ice and pack ice in Antarctica using multiple pairs of SAR images. The software processing pipeline uses overlapping image pairs which are geocoded and roughly registered using only data contained in the image headers. Next, fast ice maps are rapidly generated using zero motion features located within ocean regions. This also provides precise image registration. Finally, the same image pairs are re-examined for pack ice motion in a slower off-line batch process. The pack and fast ice are identified using a cluster-based search method which compares both location and motion information. Each image pair generates a NetCDF file which adds to a growing database of Antarctic sea ice motion and ice roughness. Five image-pair examples are presented to illustrate the methods used as well as their strengths and limitations. Substantial pack ice motion can often be detected in the marginal ice zone on SAR images only a few days apart.     

Using OLAP and multidimensional data for decision making

Managers see information as a critical resource and require systems that let them exploit it for competitive advantage. One way to better use organizational information is via online analytical processing and multidimensional databases (MDDBs). OLAP and MDDBs present summarized information from company databases. They use multidimensional structures that let managers slice and dice views of company performance data and drill down into trouble spots. For over a decade, proponents have touted these tools as the ultimate executive information system, but most of the hype comes from product vendors themselves. Based on our experience with several OLAP tools, we have developed a more pragmatic approach to the design of multidimensional information systems that lets managers make the most of their companies' information assets     

Premelting transition in uranium dioxide

Thermal analysis of the cooling curves of small samples of uranium dioxide, laser heated in a high-pressure autoclave on a subsecond time scale to a temperature just below the melting point, reveals, in the case of nominally stoichiometric UO_2.00, a significant -like heat capacity peak, indicating a premelting transition in this material. The results are discussed and a simple model is presented in terms of which the observed behavior can be described.Summary of a paper presented at the Third Workshop on Subsecond Thermophysics, September 17–18, 1992, Graz, Austria. Because of its length, the full paper was published in a regular issue of this journal (Vol. 14, No. 2, 1993).     

The optimal projection equations for fixed-order dynamic compensation

First-order necessary conditions for quadratically optimal, steady-state,fixed-order dynamic compensation of a linear, time-invariant plant in the presence of disturbance and observation noise are derived in a new and highly simplified form. In contrast to the pair of matrix Riccati equations for the full-order LQG case, the optimal steady-state fixed-order dynamic compensator is characterized by four matrix equations (two modified Riccati equations and two modified Lyapunov equations) coupled by a projection whose rank is precisely equal to the order of the compensator and which determines the optimal compensator gains. The coupling represents a graphic portrayal of the demise of the classical separation principle for the reduced-order controller case.     

Disentangling Water Usage in the European Union: A Decomposition Analysis

The Water Framework Directive (WFD) defines common objectives for water resources throughout the European Union (EU). Given this general approach to water preservation and water policy, the objective of this paper is to analyse whether common patterns of water consumption exist within Europe. In particular, our study uses two methods to reveal the reasons behind sectoral water use in all EU countries. The first method is based on an accounting indicator that calculates the water intensity of an economy as the sum of sectoral water intensities. The second method is a subsystem input-output model that divides total water use into different income channels within the production system. The application uses data for the years 2005 and 2009 on water consumption in the production system of the 27 countries of the EU. From our analysis it emerges that EU countries are characterized by very different patterns of water consumption. In particular water consumption by the agriculture sector is extremely high in Central/Eastern Europe, relative to the rest of Europe. In most countries, the water used by the fuel, power and water sector is consumed to satisfy domestic final demand. However, our analysis shows that for some countries exports from this sector are an important driver of water consumption. Focusing on the agricultural sector, the decomposition analysis suggests that water usage in Mediterranean countries is mainly driven by final demand for, and exports of, agricultural products. In Central/Eastern Europe domestic final demand is the main driver of water consumption, but in this region the proportion of water use driven by demand for exports is increasing over time. Given these heterogeneous water consumption patterns, our analysis suggests that Mediterranean and Central/Eastern European countries should adopt specific water policies in order to achieve efficient levels of water consumption in the European Union.     

The Effect of Heat Treatment on the Oxidation Mechanism of Blended Powder Cr3C2-NiCr Coatings

The advantageous oxidation and wear properties of Cr₃C₂-NiCr thermal spray coatings have resulted in them being extensively applied to combat erosion at high temperatures. Under these conditions, oxide layers take on an ever more significant role in determining the composite response. The response of blended powder-based carbide coatings for erosion applications has formed the basis for application of cermet-based coatings at elevated temperature. In this study, the oxidation mechanisms of as-sprayed and heat-treated Cr₃C₂-NiCr blended powder-based coatings are characterized. Interdiffusion between the coating phases with long-term exposure increased the Cr content of the matrix phase. This had a significant effect on the oxidation mechanism. The implications of the change in oxidation mechanism and oxide morphology on the coating response to high-temperature erosion are discussed.     

Determination of prostacyclin in plasma through a bioluminescent immunoassay for 6-keto-prostaglandin F1alpha: implication of dosage in patients with primary pulmonary hypertension

This work describes a solid-phase immunoassay for 6-keto-prostaglandin F1alpha, the stable hydrolysis product of prostacyclin (prostaglandin I2). Prostacyclin, a potent vasodilator with antiplatelet and antiproliferative properties is an effective treatment for primary pulmonary hypertension and pulmonary arterial hypertension associated with scleroderma and scleroderma-like syndrome. Levels of 6-keto-prostaglandin F1alpha can be directly correlated with levels of prostacyclin. Therefore, 6-keto-prostaglandin F1alpha, has become the indicator of choice to measure prostacyclin levels. The single-step immunoassay for 6-keto-prostaglandin F1alpha reported here was developed using the bioluminescent protein aequorin as a label. Analyte-label conjugates were constructed by linking the carboxyl group of 6-keto-prostaglandin F1alpha and lysine residues of aequorin by chemical conjugation methods. The binding properties of 6-keto-prostaglandin F1alpha toward its antibody and the bioluminescent properties of aequorin were retained in the conjugate, which was then used to generate a dose-response curve for the analyte in a convenient microtiter plate format. The concentration of 6-keto-prostaglandin F1alpha after extraction from plasma showed good correlation with the concentration of 6-ketoprostaglandin F1alpha obtained without prior extraction of the same plasma sample. This measurement demonstrated that the assay allows the measurement of 6-keto-prostaglandin F1alpha directly in plasma without any pretreatment of the samples, which results in a much simpler method with a faster assay time.