Demographic study of first-ever stroke and acute myocardial infarction in Okinawa, Japan

We performed a cross-sectional survey of stroke and acute myocardial infarction (AMI) in Okinawa, Japan with a census population of about 1.2 million. A total of 3,644 cases of first-ever stroke and 898 cases of initial acute myocardial infarction (AMI) were detected. The age-adjusted annual incidence rate for stroke was 105 per 100,000 standard population of Japan, and that of AMI was 26. The case-fatality rate of stroke within 28 days of onset was 12.8%, and that of AMI was 22.2%. Of the stroke cases, 51.4% were diagnosed as brain infarction, 38.7% as brain hemorrhage, and 9.3% as subarachnoid hemorrhage. The diagnosis of stroke subtypes were confirmed by computed tomography or magnetic resonance imaging in 98.4% of all stroke cases. In Okinawa, the incidence rate of AMI was still considerably lower than that in the Western population, and the rate of stroke was similar to that in the Western population.     

Numerical analyses of high‐beta spherical tokamaks with varied elongation

The effect of plasma elongation on the second‐stable spherical tokamak (ST) was numerically studied using the experimentally measured pressure and current profiles of ultrahigh‐beta STs. The maximum beta of ST over 50% was obtained in the TS‐3 ST/CT experiment by applying an external toroidal field to an FRC. It was found that the marginal beta for the ballooning instability increased with the plasma elongation κ of ST. The elongated STs with κ > 2 have the magnetic shear (S)–pressure gradient (α) profiles located in the second‐stable regime for the ballooning mode and the stability margin increased with κ. The close relation between the absolute minimum‐B profile and the second stability was documented. The effect of elongation on maximum beta was observed to saturate when κ exceed 3, indicating that the optimized elongation for high‐beta STs is located around 2 < κ < 3. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 1–6, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20132     

Elimination of fictitious penetrating rays from PO and hybridization with AFIM

Physical optics (PO) is an approximation method for high‐frequency scattering and diffraction problems. But PO fields are inaccurate in the shadow region where the source is screened by the scatter. Two key factors of the error for PO are (i) edge diffraction coefficients and (ii) existence of fictitious penetrating rays. The correction with respect to the former has been extensively investigated by many authors using various ray techniques such as GTD, UTD, and UAT. On the other hand, the latter was identified recently by the authors. This paper proposes novel PO‐based calculation procedures termed PO‐AF and PTD‐AF, where PO and Aperture Field Integration Method (AFIM) are merged with the help of special elementary diffraction coefficients. These can uniformly cover the whole angular region and only the error factor (ii) is removed in PO‐AF while both (i) and (ii) are removed in PTD‐AF. The theoretical backgrounds of PO currents are discussed in terms of field equivalence theorem and visualization of EM waves. Next, new methods are proposed and their validity is numerically demonstrated for 2D scattering problems of a strip, a corner reflector, and a cylinder of circular arc. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 1–10, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20037     

Melatonin inhibits naloxone-induced luteinizing hormone release in ovariectomized estrogen-primed rats

The present study aimed to examine the effect of melatonin on naloxone-induced luteinizing hormone (LH) secretion in ovariectomized estrogen-primed rats. A single intracerebroventricular (i.c.v.) injection of naloxone (mu opioid receptor blocker, 15 micrograms) or an intravenous (i.v.) injection of LH-releasing hormone (LHRH, 50 ng/kg) elicited a transient and significant increase in the serum LH concentration within 10 min. While an i.c.v. injection of 100 ng melatonin by itself did not change the basal LH release, it almost completely inhibited the naloxone-induced LH release. Melatonin (10 ng) also significantly reduced the effect of naloxone. However, an i.c.v. injection of 100 ng melatonin did not affect the LHRH-induced LH release. In separate experiments, the effect of melatonin on naloxone-induced pulsatile LH secretion was studied in estrogen-treated rats. A continuous i.v. infusion of naloxone (20 mg/kg/h) induced LH pulses in rats treated i.c.v. with saline. An i.c.v. administration of 100 ng melatonin, which by itself did not affect basal LH secretion, significantly reduced the frequency, but not the amplitude, of LH pulses induced by the naloxone infusion. These results show that melatonin has a suprapituitary site of action to inhibit naloxone-induced LH release, and suggest that melatonin has an effect in inhibiting the activity of the hypothalamic LHRH pulse generator, either directly or indirectly, in female rats.     

Effects of Environmental Temperature and Compression Energy on Polymorphic Transformation During Tabletting

The effects of temperature on the polymorphic transformation and the compression of chlorpropamlde forms A and C during tabletting were investigated by X-ray diffractometry. The X-ray diffraction profiles of the sample powders deagglomerated after compression were recorded to calculate the degree of polymorphic transformation. A single punch eccentric tabletting machine equipped with two load cells (upper and lower punches) and with a noncontact displacement transducer was used to measure the compression stress, energy and distance between punches. A heater and a liquid nitrogen pool were mounted on the die of the tabletting machine, and the die temperature was controlled with a thermocontroller. Two types of compression methods, multi-tabletting at room temperature and single tabletting at 0-45°C, were used in the present study. In the first method, the stable form A or metastable form C was loaded in to the die and the sample was compressed with a compression stress of 196 MPa. Compression was repeated from 1 to 30 times. The results for forms A and C suggested that both forms were mutually transformed, and that the content of forms A and C reached equilibrium above 100 J/g of compression energy after more than 10-times compression. After 30-times compression, the content of A, C, and the noncrystalline solid form were almost constant at about 45%, 25% and 30%, respectively. The compression energy was estimated to be 500-600 J/g. In the second method, single tabletting at 0° and 45°C, the amount of form C transformed from form A at 45°C was about two times larger than that at 0°C at the same compression energy. The amount of form A transformed from form C at 45°C was almost the same as that transformed at 0°C. This suggests that the mechanochemical stability of form A was affected by compression temperature, while that of form C was independent of temperature. The crushing strength (CS) of from A tablet was about two times higher than that of form C even at the same porosity. The relationships between log (CS) of form A tablets compressed at 0 or 45°C and porosity showed straight lines with the same slope, but the slope for form C tablets compressed at 45°C was smaller than that for those compression at 0°C. From these results it appears that the transformation mechanism of forms A and C during compression was as follows: Form A or C was converted to a noncrystalline solid by mechanical energy, and then the solid was transformed into form A or C. The transformation of every form was affected by the environmental temperature.     

A far-infrared spectroscopic study of low temperature soft phonon mode in Tris-Sarcosine Calcium Chloride(TSCC)

Temperature dependences of the soft phonon frequency and the damping constant in Tris-Sarcosine Calcium Chloride (TSCC) single crystal have been investigated between 5K and 100K by using a Fourier-transform far-infrared spectrometer. It has been observed that the soft phonon frequency decreases gradually and the damping constant increases as the transition temperature is approached from below The damping constant varies from 7cm^-1 a 90K to less than 0.5cm^-1 at 5K. It has been found that the damping constant is approximately proportional to temperature below about 60K.     

Flexural properties of moldings of rigid polyurethane made by reaction injection molding

Flexural properties of moldings made by Reaction Injection Molding (RIM), which are structural foams consisting of high density skin and low density core, were investigated by three-point bending tests. Two failure modes were observed in bending tests of the moldings made by RIM, and they are classified as follows according to the density ratio of skin layer to core layer: the opposite side of the skin layer to which load was subjected failed by tensile stress: and the same side of the skin layer to which load was subjected failed by compressive stress, causing wrinkling or buckling. Then the conventional composite beam theory was applied to the former failure mode and Hoff s buckling theory to the latter, and equations were derived to predict the flexural properties of the structural foams, which involved buckling from the flexural properties of solid construction. In addition, it has been shown that there exists a density distribution that maximizes the flexural strength of the moldings made by RIM with a given overall density. The results obtained here should be useful to the optimum structural design of moldings made by RIM.     

An instantaneous response CMOS optical receiver IC with widedynamic range and extremely high sensitivity using feed-forwardauto-bias adjustment

An instantaneous response CMOS optical-receiver IC is described with wide input dynamic range and high sensitivity. In a TCM (time compression multiplexing)-TDMA (time division multiple access) fiber-optic subscriber system, a receiver should be able to handle burst-data packets with different amplitude. This requires quick response and a wide dynamic range. Instantaneous response is achieved with a new feed-forward auto-bias adjustment technique. In addition, multistaged offset compensation provides a wide dynamic range without any external elements and adjustments. Using these design techniques, an optical receiver IC was fabricated in a standard 0.8-μm CMOS technology. The receiver has a wide dynamic range of more than 25 dB for burst-mode optical input at 29 Mb/s. It has high transimpedance gain of 150 dBΩ and high sensitivity of -42 dBm with stable operation for FET threshold voltage and power supply voltage fluctuation     

Importance of nuclear generation in the struggles to reduce CO2 emission at Kansai Electric Power Co.

It has been pointed out in recent years that the potential impacts of global warming has been becoming more and more serious because of the rapid increase of anthropogenic CO₂ emission.

Japan's annual CO₂ emissions (fiscal 1994) amounted to 343 million tons of carbon. Although CO₂ emissions caused by fossil-fuel power generation accounted for 29.4% of total, on a sector basis, those directly from the energy conversion sector accounted for only 7.7%. Most CO₂ emissions (21.7% of total) resulted from electric power use in the industrial, commercial and domestic sectors. Thus, the reduction of CO₂ emissions caused by the use of electricity is a nationwide subject.

Understanding that both supply side and demand side approaches are necessary, Kansai Electric has been deploying “New ERA Strategy” as a comprehensive strategy to seek a potential for CO₂ reduction more broadly and deeply. Among a number of action items are the promotion of nuclear power generation, and improvement of overall energy efficiency, besides such demand side measures as leveling off the peak load.

The effectiveness of action items of the New ERA Strategy was evaluated in terms of CO₂ reduction. As a result, estimated CO₂ reduction related to nuclear power amounted to 88% of the total for fiscal 1995 in comparison with 1990, and that expected in 2000 is 84%. These results reconfirm that nuclear power is always the key to practical CO₂ reduction at present and in the future.

Comparison with candidate technology alternatives revealed that photovoltaic power generation needed 7 times greater rated capacity and 280 times larger area than nuclear power, so it is not realistic as a central power station alternative. The comparison also clarified that if wind power stations were constructed at all feasible sites in the Kansai region, they would not be a viable alternative to a single nuclear unit from CO₂ reduction viewpoint.